Expression of Concern: Solid-state dye-sensitized solar cells based on Zn1-xSnxO nanocomposite photoanodes.

Expression of Concern for 'Solid-state dye-sensitized solar cells based on Zn1-xSnxO nanocomposite photoanodes' by Ayat Nasr El-Shazly et al., RSC Adv., 2018,8, 24059-24067, DOI: https://doi.org/10.1039/c8ra02852d.

Selective Separation and Preconcentration of Caffeine from Natural and Pharmaceutical Products using New Polyurethane Foams

Abstract Two polyurethane foam-based sorbents (PUF) were synthesized by imprinting and grafting techniques and examined for selective separation and preconcentration of caffeine (CAF) in some pharmaceutical products and in black tea. Molecularly imprinted PUF was synthesized based on hydrogen-bonding interactions between CAF and alizarin yellow G (AYG) and subsequent polymerization into PUF. The static experiments indicated optimum sorption conditions at pH=6.5 and 5.5 for imprinted PUF (AY-IPUF) and grafted PUF (AY-GPUF), respectively. In the online experiments, the suitable preconcentration time was found to be 40 and 20s for (AY-IPUF) and (AY-GPUF), respectively, at a flow rate of 1.75 mL.min-1. Desorption of CAF has been affected by passing 500 µL of 0.05, 0.01 mol.L−1 HCl eluent onto (AY-IPUF) and (AY-GPUF), respectively. The online methods have provided satisfactory enrichment factors of 8.4 and 10.5 for (AY-IPUF) and (AY-GPUF), respectively. The time consumed for preconcentartion, elution and determination steps was 1.48 and 1.05 min, thus, the throughput was 42 and 57 h-1, for (AY-IPUF) and (AY-GPUF), respectively. The developed sorbents were studied for the determination of CAF in pharmaceutical samples which will be helpful to minimize caffeinism. Finally, in silico bioactivity, ADMET and drug-likeness predictive computational studies of caffeine were also carried out

Solid-state dye-sensitized solar cells based on Zn1-x Sn x O nanocomposite photoanodes.

Solid-state dye-sensitized solar cells (ss-DSSCs) comprising Sn2+-substituted ZnO nanopowder were purposefully tailored via a co-precipitation method. The solar cells assembled in this work were sensitized with N719 ruthenium dye and insinuated with spiro-OMeTAD as a solid hole transport layer (HTL). Evidently, significant enhancement in cell efficiency was accomplished with Sn2+ ions-substituted ZnO photoelectrodes by maintaining the weight ratio of SnO at 5%. The overall power conversion efficiency was improved from 3.0% for the cell with pure ZnO to 4.3% for the cell with 5% SnO substitution. The improvement in the cell efficiency with Sn2+-substituted ZnO photoelectrodes is attributed to the considerably large surface area of the nanopowders for dye adsorption, efficient charge separation and the suppression of charge recombination provided by SnO. Furthermore, the energy distinction between the conduction band edges of SnO and ZnO implied a type II band alignment. Moreover, the durability as well as the stability of 15 assembled cells were studied to show the outstanding long-term stability of the devices made of Sn2+ ion substituted ZnO, and the PCE of each cell remained stable and ∼96% of its primary value was retained for up to 100 h. Subsequently, the efficacy was drastically reduced to ∼35% after 250 h of storage.

A Highly Sensitive and Selective Catalytic Determination of Mercury in Environmental Samples.

A simple, selective and highly sensitive spectrophotometric method has been developed for mercury determination utilizing its catalytic effect on the isoniazid-hexacyanoferrate (II) reaction. The paper presents for the first time (1) the catalytic effect of Hg (I) on the cited ligand substitution reactions and (2) the activating effect of thiourea on the behavior of mercury. The reaction was monitored spectrophotometrically at 423 nm using the initial rate method. The optimized reaction conditions were 5.0 mmol L(-1) hexacyanoferrate (II), 0.5 mmol L(-1) isoniazid, 150 mmol L(-1) citrate buffer (pH 3.30 ± 0.05), and 0.2 mmol L(-1) thiourea, at 50°C. Linear calibration graphs were obtained for 1-100 and 1-55 µg L(-1) with detection limits, based on the 3Sb-criterion, of 1.2 and 1.8 µg L(-1) of Hg (II) and Hg (I), respectively. The method was conveniently applied to samples of wastewaters, inactivated vaccines, and frozen Bass fish fillet, without any prior separation or preconcentration.

Sorption characteristics of caffeine onto untreated polyurethane foam: application to its determination in human plasma.

In the present paper, the sorption properties of caffeine (CAF) onto polyether type polyurethane foam (PUF) as solid phase sorbent were investigated with UV determination at 274.3 nm. Batch and column methods were used to optimize chemical, flow, kinetic and isothermal conditions for preconcentration of CAF. Results indicated quantitative sorption of CAF at pH 8 and 30 min shaking time. The maximum sorption capacity was found to be 4.1 mg g(-1). Column preconcentration was recommended at a flow rate of 1.5 mL min(-1) and desorption with 4 mL from 0.15 mol L(-1) hydrochloric acid. The procedure provided a linear analytical range of 0.05-30 mg L(-1). The detection and quantification limits are 0.016 and 0.047 mg L(-1), respectively. The procedure was applied to determination of CAF in spiked human plasma. The obtained recoveries were 98-101% and RSD values were from 0.05 to 9.5%.

Redetermination of the X-ray structure of nitroxylcobalamin: base-on nitroxylcobalamin exhibits a remarkably long Co-N(dimethylbenzimidazole) bond distance.

The X-ray structures of three new crystals of nitroxylcobalamin (NOCbl) have been determined. Unlike our earlier reported structure in which NOCbl was partially oxidized (L. Hannibal, C. A. Smith, D. W. Jacobsen and N. E. Brasch, Angew. Chem., Int. Ed. 2007, 46, 5140), the O atom of the nitroxyl ligand is located in a single position with a N=O bond distance of 1.12-1.14 Å, consistent with a double bond. The Co-N-O angle is in the 118.9-120.3 Å range. The α-axial Co-N(dimethylbenzimidazole) (Co-NB3) bond distance is a remarkable 2.32-2.35 Å in length, ~0.1 Å longer than that reported for all other cobalamin structures. The change in the Gibbs free energy for the base-on/base-off equilibrium now correlates extremely well with the Co-NB3 bond distance, as observed for other cobalamins.

Modification of AOAC method 973.31 for determination of nitrite in cured meats.

A modification of AOAC Method 973.31 is proposed to improve the extraction efficiency of nitrite from cured meat samples and its subsequent quantification based on the diazotization-coupling reaction of sulfanilamide with N-(1-naphthyl)ethylenediamine dihydrochloride (NED). The various experimental parameters were thoroughly investigated. A 5 g meat sample was mixed with 400 mL water; the pH of the mixture was adjusted to 5.5 +/- 0.3 and allowed to stand for 2 h on a water bath at 80 degrees C, with occasional shaking for the complete extraction of nitrite. After quantitative filtration, an aliquot was mixed with chloroacetic-chloroacetate buffer, pH 1.80 +/- 0.05, sulfanilamide, and NED, and the absorbance of the resulting azodye was recorded at 540 nm against water as a reference. Following the recommended procedure, a linear calibration graph was obtained for up to 0.8 microg/mL NO2(-), with a correlation coefficient of 0.9996 and a detection limit (based on the 3 Sb-criterion) of 5.6 ng/mL NO2(-). The proposed method was conveniently applied to various cured meat samples and was validated by comparison with the original AOAC method and by recovery experiments that gave quantitative results (94-98%) with convenient reproducibility. Statistical analysis of the analytical data could not detect any systematic error and revealed the high accuracy and precision of the proposed method.

Elimination of the interferences of anions in the kinetic spectrophotometric determination of vanadium (V) solution.

Accurate determination of vanadium (V) in industrial waste water is of great importance in environmental, biological and toxicological studies. Most of kinetic spectrophotometric methods based on the catalytic effect of vanadium (V), when applied to real samples for determination of trace levels of vanadium (V) lack the satisfactory sensitivity and selectivity. This may be attributed to the serious interferences of various anions which are common pollutants in industrial waste water. The oxidation of gallic acid by ammonium persulphate, catalysed by vanadium (V) was chosen for our study. The effect of the serious interferences of various anions such as chloride, bromate, bromide, chromate, iodide, iodate, molybdate, carbonate and sulphate on the net absorbance given by 4 microg l(-1) of vanadium (V) solution were studied. The minimum concentrations of citric acid, EDTA, ascorbic acid and oxalic acid as leveling off agents required to level off interfering effects due to the aforementioned anions in the kinetic determination of vanadium (V) were 50, 70, 80 and 120 microg ml(-1), respectively. In the presence of optimum concentrations of effective leveling off agents, the dynamic range can be extended and sensitivity increased as compared with the proposed method without levelling off agents. The proposed method is a rapid, sensitive and selective method for the determination of ultra trace amounts of vanadium (V) in real samples with satisfactory results.