Investigating superiority of novel bilosomes over niosomes in the transdermal delivery of diacerein: in vitro characterization, ex vivo permeation and in vivo skin deposition study.

Skin is considered the most accessible organ of the body because of its underlying capillary network. However, stratum corneum (SC), the upper most layer of skin, represents major diffusional barrier for most drugs. Hence, the use of edge activators (EAs) in designing novel elastic vesicles is hypothesized to impart their lipid bilayer with ultra-flexibility to trespass SC by high self-optimizing deformability. To confirm this hypothesis, this work aimed at developing novel bilosomes by modulating conventional niosomal composition using different bile salts as EAs and investigating their superiority over niosomes for transdermal delivery of diacerein (DCN), as model drug. Bilosomes were prepared by thin film hydration (TFH) technique according to full 31.22 factorial design to select the optimal formulation using Design-Expert® software. The optimal bilosomes (B6) showed nanosized vesicles (301.65 ± 17.32 nm) and 100.00 ± 0.00 % entrapment efficiency. Ex vivo permeation studies and in vivo evaluation revealed that B6 exhibited superior permeation and drug retention capacity compared to the conventional niosomal formulation and drug suspension. Furthermore, B6 was subjected to in vivo histopathological study using male Wistar rats which ensured its safety for topical application. Overall, the results confirmed the hypothesized superiority of bilosomes over niosomes for enhancing DCN flux across the skin.

Corneal targeted Sertaconazole nitrate loaded cubosomes: Preparation, statistical optimization, in vitro characterization, ex vivo permeation and in vivo studies.

Sertaconazole nitrate (STZ) is a poorly soluble antifungal drug commonly used for treating fungal skin infections. Introducing it as a new treatment option for the management of fungal keratitis, requires the development of a delivery system capable of targeting the infected cornea with an adequate STZ concentration. Hence, Sertaconazole nitrate loaded cubosomes (STZ-CUBs) were prepared, characterized and optimized based on a 33 central composite face-centred design. Optimized formulation (CUB-opt) showed maximum desirability (0.905), with solubilization efficiency (SE%) of 94.50 ±â€¯0.51%, particle size (PS) of 216.55 ±â€¯2.33 nm, polydispersity index (PDI) of 0.229 ±â€¯0.11 and zeta potential (ZP) of 34.00 ±â€¯6.93 mV. Under the transmission electron microscope, it showed discrete cubic shaped structures. Moreover, it exhibited a promising mucoadhesive behavior, terminal sterilization stability, and storage stability. Ex vivo corneal permeation study revealed its ability to enhance the steady state flux (Jss) and the permeability coefficient (KP) of STZ, compared to STZ-suspension. Finally, CUB-opt formulation was found to be safe on the corneal tissues in the in vivo corneal tolerance study, and demonstrated a superior corneal penetration power in the in vivo corneal uptake study.

Solutol HS15 based binary mixed micelles with penetration enhancers for augmented corneal delivery of sertaconazole nitrate: optimization, in vitro, ex vivo and in vivo characterization.

Keratomycosis is a serious corneal disease that can cause a permanent visual disability if not treated effectively. Sertaconazole nitrate (STZ), a novel broad spectrum antifungal drug, was suggested as a promising treatment. However, its utility in the ocular route is restricted by its poor solubility, along with other problems facing the ocular delivery like short residence time, and the existing corneal barrier. Therefore, the objective of this study was to formulate STZ loaded binary mixed micelles (STZ-MMs) enriched with different penetration enhancers using thin-film hydration method, based on a 31.22 mixed factorial design. Different formulation variables were examined, namely, type of auxiliary surfactant, type of penetration enhancer, and total surfactants: drug ratio, and their effects on the solubility of STZ in MMs (SM), particle size (PS), polydispersity index (PDI), and zeta potential (ZP) were evaluated. STZ-MMs enhanced STZ aqueous solubility up to 338.82-fold compared to free STZ. Two optimized formulations (MM-8 and MM-11) based on the desirability factor (0.891 and 0.866) were selected by Design expert® software for further investigations. The optimized formulations were imaged by TEM which revealed nanosized spherical micelles. Moreover, they were examined for corneal mucoadhesion, stability upon dilution, storage effect, and ex vivo corneal permeation studies. Finally, both in vivo corneal uptake and in vivo corneal tolerance were investigated. MM-8 showed superiority in the ex vivo and in vivo permeation studies when compared to the STZ-suspension. The obtained results suggest that the aforementioned STZ loaded mixed micellar system could be an effective candidate for Keratomycosis-targeted therapy.

Implementing Central Composite Design for Developing Transdermal Diacerein-Loaded Niosomes: Ex vivo Permeation and In vivo Deposition.

BACKGROUND: Niosomes are surfactant-based vesicular nanosystems that proved their efficiency in transdermal delivery by overcoming skin inherent anatomic barrier; startum corneum. Central composite design is an efficient tool for developing and optimizing niosomal formulations using fewer experiments. OBJECTIVE: The objective of this study was to prepare niosomes as a transdermal delivery system of diacerein using film hydration technique, employing central composite design, for avoiding its oral gastrointestinal problems. METHODS: Three-level three-factor central composite design was employed for attaining optimal niosomes formulation with the desired characteristics. Three formulation variables were assessed: amount of salt in hydration medium (X1), lipid amount (X2) and number of surfactant parts (X3). DCNloaded niosomes were evaluated for entrapment efficiency percent (Y1), particle size (Y2), polydispersity index (Y3) and zeta potential (Y4). The suggested optimal niosomes were subjected to further characterization and utilized as a nucleus for developing elastic vesicles for comparative ex vivo and in vivo studies. RESULTS: The values of the independent variables (X1, X2 and X3) in the optimal niosomes formulation were 0 g, 150 mg and 5 parts, respectively. It showed entrapment efficiency percentage of 95.63%, particle size of 436.65 nm, polydispersity index of 0.47 and zeta potential of -38.80 mV. Results of ex vivo permeation and skin deposition studies showed enhanced skin permeation and retention capacity of the prepared vesicles than drug suspension. CONCLUSION: Results revealed that a transdermal niosomal system was successfully prepared and evaluated using central composite design which will result in delivering diacerein efficiently, avoiding its oral problems.

Fabrication of novel elastosomes for boosting the transdermal delivery of diacerein: statistical optimization, ex-vivo permeation, in-vivo skin deposition and pharmacokinetic assessment compared to oral formulation.

Diacerein (DCN) is a hydrophobic osteoarthritis (OA) drug with short half-life and low oral bioavailability. Furthermore, DCN oral administration is associated with diarrhea which represents obstacle against its oral use. Hence, this article aimed at developing elastosomes (edge activator (EA)-based vesicular nanocarriers) as a novel transdermal system for delivering DCN efficiently and avoiding its oral problems. For achieving this goal, elastosomes were prepared according to 41.21 full factorial design using different EAs in varying amounts. The prepared formulae were characterized regarding their entrapment efficiency percentage (EE%), particle size (PS), polydispersity index (PDI), zeta potential (ZP) and deformability index (DI). Desirability function was employed using Design-Expert® software to select the optimal elastosomes (E1) which showed EE% of 96.25 ± 2.19%, PS of 506.35 ± 44.61 nm, PDI of 0.46 ± 0.09, ZP of -38.65 ± 0.91 mV, and DI of 12.74 ± 2.63 g. In addition, E1 was compared to DCN-loaded bilosomes and both vesicles exhibited superior skin permeation potential and retention capacity compared to drug suspension. In-vivo histopathological study was performed which ensured the safety of E1 for topical application. Furthermore, the pharmacokinetic study conducted in albino rabbits demonstrated that there was no significant difference in the rate and extent of DCN absorption from topically applied E1 compared to oral suspension. Multiple level C in-vitro in-vivo correlation showed good correlation between in-vitro release and in-vivo drug performance for E1 and DCN oral suspension. Overall, results confirmed the admirable potential of E1 to be utilized as novel carrier for transdermal delivery of DCN and bypassing its oral side effects.

Comparison of nanomilling and coprecipitation on the enhancement of in vitro dissolution rate of poorly water-soluble model drug aripiprazole.

The aim of this study was to evaluate the effect of coprecipitation and nanomilling on the crystallinity of a model drug, aripiprazole and evaluate the in vitro dissolution rate (IDR). Aripiprazole compositions were prepared by physical mixing, coprecipitation and nanomilling using hydroxypropylcellulose (HPC), polyvinylpyrrolidone (PVP) K17 and pluronic F127. The particle size, solubility, IDR and drug crystallinity were studied. Aripiprazole pluronic compositions were compressed into tablets and dissolution rate was evaluated. The particle size of nanomilled compositions was significantly smaller than that of the other compositions. The saturation solubility of aripiprazole from nanoparticle (NP) and coprecipitate (CP) from PVP and Pluronic was comparable, however, NP of HPC containing composition showed higher solubility when compared to its CP compositions. The crystallinity of aripiprazole decreased from physical mixtures to coprecipitates and further in NPs. The increased aripiprazole IDR was due to decreased crystallinity from coprecipitate compositions and disruption of crystallinity from nanomilled compositions. Aripiprazole tablets prepared from nanomilled powder dissolved >75% within 10 min compared with 17% and 20% for tablets prepared from physical mixture and coprecipitate powders, respectively. The increase in IDR due to nanomilling was more significant than coprecipitation and NPs retained the IDR after compression into tablets.

Effect of fixed aqueous layer thickness of polymeric stabilizers on zeta potential and stability of aripiprazole nanosuspensions.

The aim of this study was to evaluate the effect of the thickness of adsorbed polymer layer (also known as Fixed Aqueous Layer Thickness, FALT) of polymeric stabilizers on zeta potential and stability of nanoparticles in a suspension. Aripiprazole, a poorly water soluble drug was used as a model drug to evaluate rationale for increased FALT and to understand the effect of hydrophilicity and hydrophobicity of polymeric stabilizers on FALT of aripiprazole nanosuspensions. The nanosuspensions were prepared by media milling and Pluronic F68, Pluronic F127, Hydroxypropyl methylcellulose (HPMC) and Hydroxypropyl cellulose (HPC) were used as polymeric stabilizers. The particle size (immediately after preparation and after 1 week of storage at 25°C) and zeta potential of aripiprazole nanosuspensions were determined. For Pluronics, FALT was determined theoretically whereas for HPMC and HPC it was calculated as Debye Huckel parameter from the zeta potential dependence on the ionic strength. An increase in FALT resulted in reduced zeta potential. With an increase in FALT of polymers used, the stability of nanosuspensions showed improvement. Furthermore, a linear correlation was shown to exist between the FALT and length of hydrophilic chains in Pluronics.