Development of Capillary Zone Electrophoresis Method for the Simultaneous Separation and Quantification of Metformin and Pioglitazone in Dosage Forms; and Comparison with HPLC Method.

A capillary zone electrophoretic (CZE) method was developed, validated, and applied for the assay of metformin (MET) and pioglitazone (PIO) in pharmaceutical formulations. The optimum running buffer composition was found to be 75 mmol/L phosphate buffer containing 30% acetonitrile (ACN) at pH 4.0. The optimum instrumental conditions were found to be injection time, 10 s; applied voltage, 25 kV; hydrodynamic injection pressure, 0.5 psi for 10 s, capillary temperature, 25 °C; and the detection wavelength, 210 nm. The quantifications were calculated based on the ratio of the peak areas of analytes to atenolol as an internal standard. The CZE method was validated in terms of accuracy (98.21-104.81%), intra- and inter-day precision of migration time and peak area (relative standard deviation ≤ 5%), linearity (correlation coefficients ≥ 0.9985), limit of detection (≤0.277 µg/mL), and limit of quantitation (≤0.315 µg/mL). The proposed method was applied for the analysis of PIO and MET both individually and in a combined dosage tablet formulation. All electrophoretic parameters were calculated and evaluated. A previously reported high-performance liquid chromatographic (HPLC) method was also applied to the same samples. A comprehensive comparison was then carried out for the analytical features of both methods CZE and HPLC. Comparable results were obtained with the advantage of reagent consumption and separation efficiency of CZE over HPLC and shorter analysis time by HPLC compared with CZE.

Sequential injection chromatography for separation and quantification of chlorpromazine in human urine and pharmaceutical formulations.

Sequential injection chromatography (SIC) is a recent, simple, and inexpensive green miniaturized separation technique. In the current study, SIC was exploited for the first time for biochemical analysis. A new SIC method for the separation and quantification of chlorpromazine in human urine, as well as pharmaceutical formulations, was developed and validated. Clozapine was used as an internal standard. Chlorpromazine was successfully separated on a C18 monolithic column (25x4.6 mm id). The UV detection was carried out at 250 nm using miniaturized fiber optic spectrometric devices. The optimum mobile phase composition was 30 mmol/L phosphate-acetonitrile-methanol (55.0 + 31.5 + 13.5, v/v/v) at pH 3.0. The sample volume was 40 microL and flow rate was 40 microL/s. Acceptable chromatographic results were obtained. The resolution was 2.7, peak symmetry was 1.1, and number of theoretical plates was more than 1 x 10(6). Good linearity (r = 0.9997) in the range of 25-100 microg/mL was also obtained. The method offered acceptable recovery for both human urine (89.6-93.1%) and pharmaceutical formulations (96.9-98.5%), which was sensitive enough to detect chlorpromazine. The LOD and LOQ in human urine were 61 and 204 ng/mL, respectively. The method was rapid and reagent-saving, and hence safe for the environment. The sample throughput was 26.3 samples/h and the total volume of consumed reagents was 4.0 mL.

Capillary electrophoresis assay method for metoprolol and hydrochlorothiazide in their combined dosage form with multivariate optimization.

The current manuscript reports the first capillary electrophoresis method for the separation and quantification of metoprolol (MET) and hydrochlorothiazide (HCT) in their combined dosage form. MET and HCT were detected at 240 and 214 nm, respectively, using a photodiode array detector. The univariate approach was used for optimizing voltage, injection time and capillary temperature. The factorial design with response surface plots, as a multivariate approach, was used to study the effect of buffer concentration and pH on resolution, peak area and migration time. The optimum conditions were 50 mmol/L phosphate at pH 9.5, injection time 10.0 s, voltage 25 kV and capillary temperature 25°C. The method was linear in the range of 2.5-250 µg/mL for both drugs with correlation coefficients above 0.9997. Additionally, acceptable recovery of the contents of MET and HCT in their formulations (96.0-100.3%) with acceptable precision (1.38-2.60 %) were achieved. Moreover, the limits of detection of MET and HCT were 0.02 and 0.01 µg/mL, respectively, which were suitable for pharmaceutical analysis.