Flow optimization study of a batch microfluidics PET tracer synthesizing device.

We present numerical modeling and experimental studies of flow optimization inside a batch microfluidic micro-reactor used for synthesis of human-scale doses of Positron Emission Tomography (PET) tracers. Novel techniques are used for mixing within, and eluting liquid out of, the coin-shaped reaction chamber. Numerical solutions of the general incompressible Navier Stokes equations along with time-dependent elution scalar field equation for the three dimensional coin-shaped geometry were obtained and validated using fluorescence imaging analysis techniques. Utilizing the approach presented in this work, we were able to identify optimized geometrical and operational conditions for the micro-reactor in the absence of radioactive material commonly used in PET related tracer production platforms as well as evaluate the designed and fabricated micro-reactor using numerical and experimental validations.

Pre-clinical evaluation of a 3-nitro-1,2,4-triazole analogue of [18F]FMISO as hypoxia-selective tracer for PET.

Hypoxia in solid tumours is associated with the promotion of various metabolic mechanisms and induces resistance to radio- and chemotherapy. Non-invasive positron emission tomography (PET) or single photon emission computed tomography by use of selective biomarkers has emerged as valuable tools for the detection of hypoxic areas within tumours so treatment can be modified accordingly. The aim of this investigation was to evaluate [(18)F]3-NTR, a 3-nitro-1,2,4-triazole analogue (N(1) substituted) of [(18)F]FMISO as a potential hypoxia selective tracer. 3-NTR and its (18)F-radiolabelled isotopic isomer were synthesised and compared with FMISO in vitro and in vivo. Their physicochemical properties were measured, the enzymatic reduction was evaluated, and the reactivity of their metabolites was investigated. Biodistribution and PET scans were performed on CBA mice bearing hypoxic CaNT tumour cells, using (18)F-labelled versions of the tracers. [(18)F]3-NTR uptake within hypoxic cells was lower than [(18)F]FMISO and [(18)F]3-NTR did not exhibit any better selectivity than FMISO as a PET tracer in vivo. Both (18)F-radiolabelled compounds are relatively evenly distributed within the whole body and the radioactive uptake within hypoxic tumours reaches a maximum at 30 min post injection and decreases thereafter. Xanthine oxidase exhibited a nitroreductase activity toward 3-NTR under anaerobic conditions, but reduced metabolites did not bind covalently. It is confirmed that 3-NTR is an electron acceptor. It is postulated that radiolabelled metabolites and fragments of [(18)F]3-NTR are freely diffusing due to their poor binding capacities. Thus [(18)F]3-NTR cannot be used as a hypoxia selective tracer for PET. The investigation provides insights into the importance of the propensity to form covalent adducts for such biomarkers.

Design and optimization of coin-shaped microreactor chips for PET radiopharmaceutical synthesis.

UNLABELLED: An integrated elastomeric microfluidic device, with a footprint the size of a postage stamp, has been designed and optimized for multistep radiosynthesis of PET tracers. METHODS: The unique architecture of the device is centered around a 5-microL coin-shaped reactor, which yields reaction efficiency and speed from a combination of high reagent concentration, pressurized reactions, and rapid heat and mass transfer. Its novel features facilitate mixing, solvent exchange, and product collection. New mixing mechanisms assisted by vacuum, pressure, and chemical reactions are exploited. RESULTS: The architecture of the reported reactor is the first that has allowed batch-mode microfluidic devices to produce radiopharmaceuticals of sufficient quality and quantity to be validated by in vivo imaging. CONCLUSION: The reactor has the potential to produce multiple human doses of (18)F-FDG; the most impact, however, is expected in the synthesis of PET radiopharmaceuticals that can be made only with low yields by currently available equipment.

Microreactors for radiopharmaceutical synthesis.

Multiple advantages of microfluidics have been demonstrated in the area of organic synthesis. However, only a limited number of them have found applications in radiopharmaceutical synthesis, while that is an area where the need for improvements offered by microfluidics is very significant. The need is to create an environment where all reactions involving short-lived radioisotopes such as (18)F (110 min half-life) or (11)C (20 min half-life) are rapid and high-yielding while the devices are controlled remotely. Several groups have identified the potential of microfluidics in this area and have demonstrated that various steps of conventional radiosynthesis can be replaced by microfluidic devices. However, despite promising results that stir up the interest in the scientific community, none of these inventions has found commercial applications with broad use yet. This article will review the technologies reported to date and analyze the unmet needs that will have to be addressed before microfluidic technology has a chance of becoming a viable and truly advantageous method of preparation of commercial radiopharmaceuticals. The latter mostly center around Positron Emission Tomography (PET) biomarkers.

Complete charge pooling is prevented in viologen-based dendrimers by self-protection.

We have investigated the electrochemical behavior, and chemical and photosensitized reduction of two dendrimers based on a 1,3,5-trisubstituted benzenoid core, which contain 9 and 21 4,4'-bipyridinium (usually called viologen) units, respectively, in their branches and are terminated with tetraarylmethane groups. For comparison purposes, the behavior of reference compounds that contain a single viologen unit have also been investigated. We have found that only part of the viologen units can be reduced in the dendrimer species. For the larger dendrimer, the number of reducible viologens (out of the 21 present) is 14 in electrochemical experiments (in MeCN), 9 on reduction with bis(benzene)chromium (in MeCN), and 13 by photoinduced electron transfer with 9-methylanthracene as a photosensitizer and triethanolamine as a sacrificial reductant in CH2Cl2. The reduced viologen units undergo partial dimerization. The photochemical experiments have shown that only monomeric, one-electron-reduced viologen units are formed at the beginning of the irradiation, followed by dimer formation, until a photostationary state is reached that contains 40 % nonreduced, 33 % monomeric reduced, and 27 % reduced units associated in the dimeric form. The results suggest that, upon reduction of a fraction of the viologen units, the dendrimer structure shrinks, with the result that the bulky terminal groups protect other viologen units from being reduced.

Polyvalent interactions in unnatural recognition processes.

The synthesis of two cluster compounds, one containing six secondary dialkylammonium ion centers and the other possessing six benzo-m-phenylene[25]crown-8 (BMP25C8) macrocycles, both appended to hexakis(thiophenyl)benzene cores, is described. The binding of these clusters with complementary mono- and divalent ligands is investigated with NMR spectroscopy to probe polyvalency in these unnatural recognition systems. The ability of the two different families of clusters to bind complementary monovalent ligands is compared with that of the monovalent receptor pair, namely the dibenzylammonium ion and BMP25C8. This comparison is made possible by determining an average association constant (K(AVE)) for the binding of each recognition site on the cluster with the corresponding monovalent ligand. We have found that the clustering of recognition sites together in one molecule is detrimental to their individual abilities to bind monovalent ligands. In the case of the polyvalent interaction between the hexakisBMP25C8 cluster and divalent dialkylammonium ions, an association constant, K(POLY), was calculated from the value of K(AVE) determined for the complexation of the individual component recognition sites. This polyvalent interaction is significantly stronger than that associated with the averaged monovalent interactions.

Polyvalent scaffolds. Counting the number of seats available for eosin guest molecules in viologen-based host dendrimers.

We have prepared and investigated two dendrimers based on a 1,3,5-trisubstituted benzenoid-type core, containing 9 and 21 viologen units in their branches, respectively, and terminated with tetraarylmethane derivatives. We have shown that, in dichloromethane solution, such highly charged cationic species give rise to strong host-guest complexes with the dianionic form of the red dye eosin. Upon complexation, the absorption spectrum of eosin becomes broader and is slightly displaced toward lower energies, whereas the strong fluorescence of eosin is completely quenched. Titration experiments based on fluorescence measurements have shown that each viologen unit in the dendrimers becomes associated with an eosin molecule, so that the number of positions ("seats") available for the guest molecules in the hosting dendrimer is clearly established, e.g., 21 for the larger of the two dendrimers. The host-guest interaction can be destroyed by addition of chloride ions, a procedure which permits eosin to escape from the dendrimer's interior in a controlled way and to regain its intense fluorescence. When chloride anions are precipitated out by addition of silver cations, eosin molecules re-enter the dendrimer's interior and their fluorescence again disappears.

An acid-base switchable [2]rotaxane.

A chemically addressable, bistable [2]rotaxane, which incorporates a dumbbell-shaped component containing both secondary dialkylammonium and 1,2-bis(pyridinium)ethane recognition sites for its ring component, dibenzo[24]crown-8 (DB24C8), has been assembled. (1)H NMR spectroscopy has demonstrated that deprotonation (and reprotonation) of the secondary dialkylammonium (dialkylamine) recognition site induces the DB24C8 ring to move away from this site to the 1,2-bis(pyridinium)ethane one (and back again) in a discrete manner, particularly when the experiment is performed in CDCl(3) solution.

Translational isomerism in a [3]catenane and a [3]rotaxane.

[structure: see text] Post-assembly covalent modification using Wittig chemistry of [2]rotaxane ylides, wherein NH(2)(+) centers in the dumbbell-shaped components are recognized by dibenzo[24]crown-8 (DB24C8) rings, has afforded a [3]catenane and a [3]rotaxane with a precise and synthetically prescribed shortage of DB24C8 rings. The nondegenerate pairs of translational isomers present in both of these interlocked molecular compounds provide the fundamental platform on which to construct sensory devices and nanochemomechanical systems.

Self-assembly of dendrimers by slippage.

[reaction: see text] A dendrimer with rotaxane-like characteristics has been assembled under thermodynamic control from complementary wedge-shaped precursors by slippage in CH(2)Cl(2). The driving force for the self-assembly process is the molecular recognition that exists as a result of [N(+)-H.O] and [C-H.O] hydrogen bonds between an NH(2)(+) center in one Fréchet-type benzyl ether wedge and a dibenzo[24]crown-8 unit that links the other two such wedges.

Dendrimer with rotaxane-like mechanical branching.

[reaction: see text] A dendrimer wherein the branching points are mechanical in nature has been synthesized. It contains two identical covalently linked bis-dendrons and a core unit fused to two rings that encircle the two bis-dendrons. A "threading-followed-by-stoppering" approach is used in the template-directed synthesis of a precursor bis[2]rotaxane, which undergoes stopper exchange four times to yield the dendrimer in which the two bis-dendrons act as stoppers within the two [2]rotaxane subunits.