Polymerization of Cyclopropenes: Taming the Strain for the Synthesis of Controlled and Sequence-Regulated Polymers.

Cyclopropenes (CPEs) are highly strained cyclic olefins, yet there are surprisingly limited examples leveraging their high strain energy for polymerization. In the past, attempts had been made to polymerize CPEs via cationic and insertion polymerization, but side reactions often gave uncontrolled polymers with mixed backbone structures. Ring-opening metathesis polymerization (ROMP) represents an ideal strategy for polymerizing CPEs to access new types of polymers. The proximity of substituents to the olefin in the small framework of CPEs offers a modular handle to tune the kinetic barrier to propagation by the modulation of the substituents. While the first few studies focused on the homopolymerization of simple alkyl or phenyl disubstituted CPEs, we recently explored the metathesis of a wide range of CPEs with different substituents using Grubbs catalysts and discovered surprising and diverse reactivities that are contingent on the positions, sterics, and electronics of substituents. The observed reactivities ranged from living homopolymerization to catalyst deactivation to single addition to the catalyst without homopropagation. In particular, the exclusively single addition reactivity found in two families of CPEs, with either bis(methanol ester) or phenyl and methanol ester substituents at the allylic position, is unusual for any monomer and perhaps counterintuitive for highly strained cycles. These single-addition CPEs could, however, be copolymerized with low-strain cyclic olefins to generate perfectly alternating copolymers with controlled molecular weights and low dispersity and to introduce degradable backbone linkages. A single equivalent (relative to the active chain end) of such CPEs could also be added to the active chain end of living ROMP polymers to install functional terminal groups or during living ROMP to place single units of functional moieties or side chains at any desired chain locations in narrow-disperse homopolymers and block copolymers. This account summarizes the polymerization of CPEs with a focus on our journey to uncover the rich and unique metathesis reactivities of CPEs and their utility in synthesizing well-controlled and sequence-regulated polymers. It provides the first collective structure-metathesis reactivity relationships for CPEs in the context of polymer chemistry and an understanding of the interactions between the catalyst and the substituents of appended ring-opened CPEs. It may become clear from this Account that the exploration of strained cycles in polymer chemistry can be quite fruitful in discovering new chemistry and accessing new types of polymer materials.

Reprocessable Cross-Linked Polymer Networks: Are Associative Exchange Mechanisms Desirable?

Covalent adaptable networks (CANs) are covalently cross-linked polymers that may be reshaped via cross-linking and/or strand exchange at elevated temperatures. They represent an exciting and rapidly developing frontier in polymer science for their potential as stimuli-responsive materials and to make traditionally nonrecyclable thermosets more sustainable. CANs whose cross-links undergo exchange via associative intermediates rather than dissociating to separate reactive groups are termed vitrimers. Vitrimers were postulated to be an attractive subset of CANs, because associative cross-link exchange mechanisms maintain the original cross-link density of the network throughout the exchange process. As a result, associative CANs demonstrate a gradual, Arrhenius-like reduction in viscosity at elevated temperatures while maintaining mechanical integrity. In contrast, CANs reprocessed by dissociation and reformation of cross-links have been postulated to exhibit a more rapid decrease in viscosity with increasing temperature. Here, we survey the stress relaxation behavior of all dissociative CANs for which variable temperature stress relaxation or viscosity data are reported to date. All exhibit an Arrhenius relationship between temperature and viscosity, as only a small percentage of the cross-links are broken instantaneously under typical reprocessing conditions. As such, dissociative and associative CANs show nearly identical reprocessing behavior over broad temperature ranges typically used for reprocessing. Given that the term vitrimer was coined to highlight an Arrhenius relationship between viscosity and temperature, in analogy to vitreous glasses, we discourage its continued use to describe associative CANs. The realization that the cross-link exchange mechanism does not greatly influence the practical reprocessing behavior of most CANs suggests that exchange chemistries can be considered with fewer constraints, focusing instead on their activation parameters, synthetic convenience, and application-specific considerations.

Degradable Polyacetals/Ketals from Alternating Ring-Opening Metathesis Polymerization.

We report the synthesis of degradable polyacetals and polyketals with controlled molecular weights and low dispersities using alternating ring-opening metathesis polymerization (AROMP) of 1,1-disubstituted cyclopropenes and dioxepins. Under optimized conditions, high degrees of alternation and controlled polymerization were achieved between nonpropagating cyclopropenes and low-strain dioxepins. The high degrees of alternation allowed the resulting polymers to fully degrade into small molecules under acidic conditions at variable rates depending on the acetal/ketal structures. This synthetic strategy illustrates the use of AROMP to incorporate functionalities into both the polymer backbone as well as the side chains.

Efficient and Facile End Group Control of Living Ring-Opening Metathesis Polymers via Single Addition of Functional Cyclopropenes.

Living ROMP has become an important technique for preparing well-controlled, highly functional polymers; however, installing functional groups at the end of living ROMP polymers is not as straightforward as ROMP itself. We report a simple, efficient strategy to introduce functionalities at the chain end of living polynorbornenes via highly selective single addition of disubstituted 1,1-cyclopropenes (CPEs) with no homopropagation. Unlike many other methods for ROMP chain end functionalization, our method does not result in catalyst termination, allowing for further functionalization after CPE addition. The remarkable reactivity of such CPEs allowed for quantitative chain end functionalization to install a variety of useful functionalities, including halides, aldehydes, ketones, amines, and dyes, without using a large excess of CPEs. These polymer chain ends can be readily modified using a range of postpolymerization modifications.

Ring-opening metathesis polymerization of 1,2-disubstituted cyclopropenes.

The ring-opening metathesis polymerization (ROMP) of 1,2-disubstituted cyclopropenes (CPs) has been explored for the first time using Grubbs 3rd generation catalyst. A range of 1,2-CPs yielded polymers with controllable MWs and low dispersitities, and allowed the synthesis of block copolymers, absent from secondary metathesis. However, there existed a competing intramolecular termination pathway for these monomers, limiting the timescale for their ROMP to stay living.

Living Alternating Ring-Opening Metathesis Polymerization Based on Single Monomer Additions.

By judiciously modulating the ring strain and sterics, we developed a class of disubstituted cyclopropenes that selectively underwent single monomer addition in ring-opening metathesis but readily underwent alternating ring-opening metathesis polymerization with low-strain cyclic olefins in a living fashion. The substituents on cyclopropenes effectively inhibited homoaddition and prevented secondary metathesis on the polymer backbone. The resulting polymers had controllable molecular weights and end groups, very low dispersities, and high regularity in microstructure under optimized conditions. (1)H and (13)C NMR spectroscopy and MALDI-TOF MS showed a rigorously alternating sequence. Interestingly, disubstituted cyclopropenes were found to present zero-order kinetics, indicating their rapid single addition and the rate-determining ring opening of the low-strain olefin.