Potential Application of Organic Electronics in Electrical Sensing of Insects and Integrated Pest Management towards Developing Ecofriendly Replacements for Chemical Insecticides.

Synthetic insecticides are widely used against plant pest insects to protect the crops. However, many insecticides have poor selectivity and are toxic also to beneficial insects, animals, and humans. In addition, insecticide residues can remain on fruits for many days, jeopardizing food safety. For these reasons, a reusable, low-cost electronic trap that can attract, detect, and identify, but attack only the pest while leaving beneficial insects unharmed could provide a sustainable, nature-friendly replacement. Here, for the first time, research results are presented suggesting the great potential and compatibility of organic electronic devices and technologies with pest management. Electrical characterizations confirm that an insect's body has relatively high dielectric permittivity. Adaptive memcapacitor circuits can track the impedance change for insect detection. Other experiments show that printed polymer piezoelectric transducers on a plastic substrate can collect information about the weight and activity of insects for identification. The breakdown voltage of most insects´ integument is measured to be <200 V. Long channel organic transistors easily work at such high voltages while being safe to touch for humans thanks to their inherent low current. This feasibility study paves the way for the future development of organic electronics for physical pest control and biodiversity protection.

Magnetically controlled growing rod treatment for early-onset scoliosis: analysis of 52 consecutive cases demonstrates improvement of coronal deformity.

Background: The purpose of this study was to report the radiographic results and complications of magnetically controlled growing rod (MCGR) treatment in patients with early-onset scoliosis (EOS). Methods: Patient records and radiographs from a consecutive series of patients treated with MCGR for EOS at two Swedish institutions were reviewed retrospectively. Radiographic analysis included Cobb angle, T1-T12 height, T1-S1 height, thoracic kyphosis, and lung height. Subgroup analyses were performed on primary versus conversion cases and single versus dual rods using one-way analysis of variance (ANOVA) and independent samples t-test. Results: Fifty-two cases treated with MCGR (24 single rods, 28 dual rods) were included from local surgical records into this cohort study, 32 primary and 20 converted from other growth friendly surgical treatment. Mean age at MCGR implantation was 7.4 (2.0-14.6) years old in the primary group and 9.3 (5.0-16.1) years old in the converted group. Mean follow-up time was 3.7 (2.0-7.6) years. Mean (standard deviation; SD) Cobb angle of the major curve changed from 62° (17°) preoperatively to 42° (16°) postoperatively to 46° (18°) at final follow-up (P<0.001). Mean (SD) overall thoracic kyphosis changed from 41° (19°) preoperatively to 32° (14°) postoperatively to 39° (17°) at final follow-up (P=0.018). Mean T1-T12 height was 177 mm (34 mm) preoperatively, 183 mm (35 mm) immediate postoperative and 199 mm (35 mm) at final follow-up (P=0.047). The mean T1-T12 height increased significantly in the primary group but not in the converted group. The number of surgeries was 114 (78 planned, 36 unplanned). The rate of unplanned surgeries did not differ significantly between single and dual rods. The total number of complications was 70 of which 38 were implant related. The overall mean complication rate was 1.4 (0-4). There were no significant differences in complication rates between subgroups. Conclusions: MCGR treatment enabled and maintained correction of spinal deformity while allowing spinal growth. There were no significant differences in complication rates or unplanned surgeries between the groups treated with single or dual rods.

High-Frequency Operation of Vertical Organic Field-Effect Transistors.

The high-frequency and low-voltage operation of organic thin-film transistors (OTFTs) is a key requirement for the commercial success of flexible electronics. Significant progress has been achieved in this regard by several research groups highlighting the potential of OTFTs to operate at several tens or even above 100 MHz. However, technology maturity, including scalability, integrability, and device reliability, is another crucial point for the semiconductor industry to bring OTFT-based flexible electronics into mass production. These requirements are often not met by high-frequency OTFTs reported in the literature as unconventional processes, such as shadow-mask patterning or alignment with unrealistic tolerances for production, are used. Here, ultra-short channel vertical organic field-effect transistors (VOFETs) with a unity current gain cut-off frequency (fT ) up to 43.2 MHz (or 4.4 MHz V-1 ) operating below 10 V are shown. Using state-of-the-art manufacturing techniques such as photolithography with reliable fabrication procedures, the integration of such devices down to the size of only 12 × 6 µm2 is shown, which is important for the adaption of this technology in high-density circuits (e.g., display driving). The intrinsic channel transconductance is analyzed and demonstrates that the frequencies up to 430 MHz can be reached if the parasitic electrode overlap is minimized.

Doped Highly Crystalline Organic Films: Toward High-Performance Organic Electronics.

Today's organic electronic devices, such as the highly successful OLED displays, are based on disordered films, with carrier mobilities orders of magnitude below those of inorganic semiconductors like silicon or GaAs. For organic devices such as diodes and transistors, higher charge carrier mobilities are paramount to achieve high performance. Organic single crystals have been shown to offer these required high mobilities. However, manufacturing and processing of these crystals are complex, rendering their use outside of laboratory-scale applications negligible. Furthermore, doping cannot be easily integrated into these systems, which is particularly problematic for devices mandating high mobility materials. Here, it is demonstrated for the model system rubrene that highly ordered, doped thin films can be prepared, allowing high-performance organic devices on almost any substrate. Specifically, triclinic rubrene crystals are created by abrupt heating of amorphous layers and can be electrically doped during the epitaxial growth process to achieve hole or electron conduction. Analysis of the space charge limited current in these films reveals record vertical mobilities of 10.3(49) cm2 V-1 s-1. To demonstrate the performance of this materials system, monolithic pin-diodes aimed for rectification are built. The f 3 d b of these diodes is over 1 GHz and thus higher than any other organic semiconductor-based device shown so far. It is believed that this work will pave the way for future high-performance organic devices based on highly crystalline thin films.

Reverse dark current in organic photodetectors and the major role of traps as source of noise.

Organic photodetectors have promising applications in low-cost imaging, health monitoring and near-infrared sensing. Recent research on organic photodetectors based on donor-acceptor systems has resulted in narrow-band, flexible and biocompatible devices, of which the best reach external photovoltaic quantum efficiencies approaching 100%. However, the high noise spectral density of these devices limits their specific detectivity to around 1013 Jones in the visible and several orders of magnitude lower in the near-infrared, severely reducing performance. Here, we show that the shot noise, proportional to the dark current, dominates the noise spectral density, demanding a comprehensive understanding of the dark current. We demonstrate that, in addition to the intrinsic saturation current generated via charge-transfer states, dark current contains a major contribution from trap-assisted generated charges and decreases systematically with decreasing concentration of traps. By modeling the dark current of several donor-acceptor systems, we reveal the interplay between traps and charge-transfer states as source of dark current and show that traps dominate the generation processes, thus being the main limiting factor of organic photodetectors detectivity.

Scenario-based analysis of the carbon mitigation potential of 6G-enabled 3D videoconferencing in 2030.

Videoconferencing and teleworking have become indispensable for many public and private organizations since the appearance of COVID-19. However, the extent to which the pandemic may have a lasting effect on people's daily life and work remains to be seen. Poor visual and acoustic quality of online meetings could reactivate old communication patterns in the long term. New technologies such as 6G and 3D holography, offering enhanced video quality and online experience, could further drive virtualization in communication. This article investigates the CO2 mitigation potential resulting from the partial replacement of business travel by 6G-enabled 3D videoconferencing in Germany in 2030. The carbon footprint calculation combined with scenario analysis has shown significant results when direct and indirect energy effects are considered. In the different scenarios investigated, a virtual conference would cause between 0.2% and 0.9% of the emissions of a mean-distance conference trip taken by a German business traveler. Considering the mitigation potential of all German conference travel in 2030, emissions could be decreased by 2.1 MtCO2eq (8.9%) and 20.5 MtCO2eq (88.4%), respectively, compared to 2019 under conservative and optimistic assumptions. In terms of current national total emissions, increasing virtualization of conferences could contribute between 0.3% and 2.8% to the German mitigation efforts.

Author Correction: Organic Power Electronics: Transistor Operation in the kA/cm2 Regime.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

A Pulse-Biasing Small-Signal Measurement Technique Enabling 40 MHz Operation of Vertical Organic Transistors.

Organic/polymer transistors can enable the fabrication of large-area flexible circuits. However, these devices are inherently temperature sensitive due to the strong temperature dependence of charge carrier mobility, suffer from low thermal conductivity of plastic substrates, and are slow due to the low mobility and long channel length (L). Here we report a new, advanced characterization circuit that within around ten microseconds simultaneously applies an accurate large-signal pulse bias and a small-signal sinusoidal excitation to the transistor and measures many high-frequency parameters. This significantly reduces the self-heating and therefore provides data at a known junction temperature more accurate for fitting model parameters to the results, enables small-signal characterization over >10 times wider bias I-V range, with ~105 times less bias-stress effects. Fully thermally-evaporated vertical permeable-base transistors with physical L = 200 nm fabricated using C60 fullerene semiconductor are characterized. Intrinsic gain up to 35 dB, and record transit frequency (unity current-gain cutoff frequency, fT) of 40 MHz at 8.6 V are achieved. Interestingly, no saturation in fT - I and transconductance (gm - I) is observed at high currents. This paves the way for the integration of high-frequency functionalities into organic circuits, such as long-distance wireless communication and switching power converters.

Organic Power Electronics: Transistor Operation in the kA/cm2 Regime.

In spite of interesting features as flexibility, organic thin-film transistors have commercially lagged behind due to the low mobilities of organic semiconductors associated with hopping transport. Furthermore, organic transistors usually have much larger channel lengths than their inorganic counterparts since high-resolution structuring is not available in low-cost production schemes. Here, we present an organic permeable-base transistor (OPBT) which, despite extremely simple processing without any high-resolution structuring, achieve a performance beyond what has so far been possible using organic semiconductors. With current densities above 1 kA cm-2 and switching speeds towards 100 MHz, they open the field of organic power electronics. Finding the physical limits and an effective mobility of only 0.06 cm2 V-1 s-1, this OPBT device architecture has much more potential if new materials optimized for its geometry will be developed.

Advanced Organic Permeable-Base Transistor with Superior Performance.

An optimized vertical organic permeable-base transistor (OPBT) competing with the best organic field-effect transistors in performance, while employing low-cost fabrication techniques, is presented. The OPBT stands out by its excellent power efficiency at the highest frequencies.

Neuronal synapse as a memristor: modeling pair- and triplet-based STDP rule.

We propose a new memristive model for the neuronal synapse based on the spike-timing-dependent plasticity (STDP) protocol, considering both long-term and short-term plasticity in the synapse. Higher-order behavior is modeled by a memristor with adaptive thresholds, which realizes the well-established suppression principle of Froemke. We assume a mechanism of variable thresholds adapting to synaptic potentiation (LTP) and depression (LTD), which reproduces the refractory time in the weight modification. The corresponding dynamical process is governed by a set of ordinary differential equations. Interestingly, the Froemke's model and our memristive model, based on two completely different mechanisms, are found to be quantitatively equivalent for the 'pre-post-pre' case and 'post-pre-post' case. A relation of the adaptive thresholds to short-term plasticity is addressed.