ABSTRACT
Sol-gel synthesis of silica and silica-tantalum oxide embedded platinum nanoparticles is carried out using Pt colloids as templates. These colloids are prepared by reduction with Na[AlEt(3)H] and stabilized with different ligands (ammonium halide derivatives, non-ionic surfactants with polyether chains, and 2-hydroxy-propionic acid). The aim of the present study is to prepare mesoporous silica embedded Pt colloids combining the "precursor concept" with the model of catalyst preparation using preformed spheres. Nanoparticles of Pt incorporated in high surface area mesoporous materials are formed after calcination. Further, it is observed that calcination of these catalysts causes partial aggregation and oxidation of the parent colloids, a process that is largely dependent on the nature of the stabilizing ligands. Several methods have been used for characterization of these materials: adsorption-desorption isotherms at 77 K, H(2) chemisorption, X-ray diffraction(XRD), (29)Si and (13)C magic angle spinning (MAS) NMR, ammonia diffuse reflectance Fourier transform infrared spectroscopy (NH(3)-DRIFT), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). It is found that both metal oxide systems exhibit Brønsted acidity (weaker for silica and quite strong for silica-tantalum oxide). In addition, NH(3)-DRIFT experiments demonstrate the oxidative properties of the surface. Part of the adsorbed NH(4) (+) species is oxidized to N(2)O. Testing these catalysts in the reduction of NO and NO(2) with isopentane under lean conditions indicate that the activity of these catalysts is indeed dependent on the size of the platinum particles, with those of size 8-10 nm demonstrating the best results. The support likely contributes to this effect, particularly after Ta incorporation into silica.
ABSTRACT
Colloids embedded in a silica sol-gel matrix were prepared by using fully alloyed Pd-Au colloids, and pure Pd and Au colloids stabilized with tetraalkylammonium bromide following a modified sol-gel procedure with tetrahydrofuran (THF) as the solvent. Tetraethoxysilicate (TEOS) was used as the precursor for the silica support. The molar composition of the sol was TEOS/THF/H2O/HCl = 1:3.5:4:0.05 for the bimetallic Pd-Au and TEOS/THF/H2O/HCl = 1:4.5:4:0.02 for Pd and Au monometallic systems. After refluxing, the colloid was added as a 4.5 wt % solution in THF for Pd-Au, 10.2 wt % solution in THF for Pd and 8.4 wt % solution in THF for Au at room temperature. The gelation was carried out with vigorous stirring (4 days) under an Ar atmosphere. Following these procedures, bimetallic Pd-Au-SiO2 catalysts with 0.6 and 1 wt % metal, and monometallic Pd- and Au-SiO2 catalysts with 1 wt % metal were prepared. These materials were further treated following four different routes: 1) by simple drying, 2) in which the dried catalysts were calcined in air at 723 K and then reduced at the same temperature, 3) in which they were directly reduced in hydrogen at 723 K, and 4) in which the surfactant was extracted using an ethanol-heptane azeotropic mixture. The catalysts were characterized by nitrogen adsorption-desorption isotherms at 77 K, H2 chemisorption measurements, solid-state 1H, 13C, 29Si-CP/MAS-NMR spectroscopy, powder X-ray diffraction (XRD), small angle X-ray scattering (SAXS), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and 197Au Mössbauer spectroscopy. The physical characterization by a combination of these techniques has shown that the size and the structural characteristics of the Pd-Au colloid precursor are preserved when embedded in an SiO2 matrix. Catalytic tests were carried out in selective hydrogenation of 3-hexyn-1-ol, cinnamaldehyde, and styrene. These data showed evidence that alloying Pd with Au in bimetallic colloids leads to enhanced activity and most importantly to improved selectivity. Also, the combination of the two metals resulted in catalysts that were very stable against poisoning, as was evidenced for the hydrogenation of styrene in the presence of thiophene.
