Physical profile and chemical composition of a novel fabricated Kaolina as alternative growing media in aquaponics.

The physical profile and chemical composition of growing media are vital in evaluating fish waste filtration efficiency and plant growth performance in aquaponics. The present study reported and compared the physical and chemical evaluation of the novel fabricated Kaolina, gravel, and commercially used lightweight expanded clay aggregate (LECA) as growing medias in aquaponics. Field emission scanning electron microscopy with energy-dispersive X-ray spectroscopy (FESEM-EDX) was utilized to analyze the growing media's chemical composition and structural characterization. The resultant effect of these growing medias on water quality and the growth performance of Clarias gariepinus and Lactuca sativa were also reported. Kaolina exhibited an excellent physical profile (42.95 ± 1.39%) in water absorption capacity as compared to LECA (35.90 ± 1.28%) and gravel (1.97 ± 0.25%), showing a significant difference at p < 0.05. The addition of 25% w/w Musa paradisiaca peel in the fabrication of Kaolina gives an added value of 88.0% of K and 100% of P elements, which show a significant difference (p < 0.05) compared to LECA. The results obtained reveal a better daily growth rate (DGR) and relative growth rate (RGR) of L. sativa at 0.57 ± 0.02 cm day-1 and 0.21 ± 0.00 g day-1, respectively. Results indicated that the porous structure of growing media could contribute to the high-water retention capability and slow the water desorption process. Hence, it could increase the ability of the growing media to hold nutrients for plant intake, resulting in higher removal percentage of nutrients in aquaponics system. Kaolina gives the highest nutrient removal percentage of TAN (96.86 ± 1.50%), NO2- (83.56 ± 1.27%), NO3-(77.55 ± 0.48%), and PO43- (79.46 ± 0.42%). The results also shown growing media has considerable impacts on nutrient removal, which contribute to the aquaponic productions.

Effects of different light source and media on growth and production of phycobiliprotein from freshwater cyanobacteria.

The aim of this study was to determine the effect of different light sources and media (wastewater and BBM) on the growth of Pseudanabaena mucicola and its phycobiliprotein production. Results showed that P. mucicola grown in white light using wastewater as medium attributed higher biomass (0.55 g L-1) and when extracted with water, also showed significantly higher (P < .05) production (237.01 mg g-1) and purity (1.14) of phycobiliprotein. This study validated that phycobiliprotein extracted from P. mucicola using water can be food grade natural blue pigment. Moreover, cyanobacteria grown in wastewater could cut down the production cost of phycobiliprotein.

Effect of Conway Medium and f/2 Medium on the growth of six genera of South China Sea marine microalgae.

A study was performed to determine the effect of Conway and f/2 media on the growth of microalgae genera. Genera of Chlorella sp., Dunaliella sp., Isochrysis sp., Chaetoceros sp., Pavlova sp. and Tetraselmis sp. were isolated from the South China Sea. During the cultivation period, the density of cells were determined using Syringe Liquid Sampler Particle Measuring System (SLS-PMS) that also generated the population distribution curve based on the size of the cells. The population of the microalgae genera is thought to consist of mother and daughter generations since these microalgae genera reproduce by releasing small non-motile reproductive cells (autospores). It was found that the reproduction of Tetraselmis sp., Dunaliella sp. and Pavlova sp. could be sustained longer in f/2 Medium. Higher cell density was achieved by genus Dunaliella, Chlorella and Isochrysis in Conway Medium. Different genera of microalgae had a preference for different types of cultivation media.

The formation and characterisation of an asymmetric nanofiltration membrane for ammonia-nitrogen removal: effect of shear rate.

The focus of this research is to study the potential of nanofiltration membrane technology in removing ammonia-nitrogen from the aquaculture system. One of the major fabrication parameters that directly affect the separation performance is shear rate or casting rate during membrane fabrication. In this study, asymmetric polyethersulfone (PES) nanofiltration membranes were prepared at five different shear rates within the range of 67-400 s(-1). Membrane productivity and separation performance were assessed via pure water, salt and ammonia-nitrogen permeation experiments, and their structural properties were determined by employing the combination of the irreversible thermodynamic (IT) model, solution diffusion model, steric hindrance pore (SHP) model and Teorell-Meyers (TMS) model. The study reveals that the alteration of shear rate enormously affects the membrane morphology and structural parameters, hence subsequently significantly influencing the membrane performance. It was found that, membrane produced at the shear rate 200 s(-1) or equivalent to 10s of casting speed during membrane fabrications managed to remove about 68% of ammonia-nitrogen, in which its separation performance is the most favourable by means of highest flux and rejection ability towards unwanted solutes. Besides, from the research findings, nano-membrane technology is a potential candidate for the treatment of aquaculture wastewater.

A study on the optimal hydraulic loading rate and plant ratios in recirculation aquaponic system.

The growths of the African catfish (Clarias gariepinus) and water spinach (Ipomoea aquatica) were evaluated in recirculation aquaponic system (RAS). Fish production performance, plant growth and nutrient removal were measured and their dependence on hydraulic loading rate (HLR) was assessed. Fish production did not differ significantly between hydraulic loading rates. In contrast to the fish production, the water spinach yield was significantly higher in the lower hydraulic loading rate. Fish production, plant growth and percentage nutrient removal were highest at hydraulic loading rate of 1.28 m/day. The ratio of fish to plant production has been calculated to balance nutrient generation from fish with nutrient removal by plants and the optimum ratio was 15-42 gram of fish feed/m(2) of plant growing area. Each unit in RAS was evaluated in terms of oxygen demand. Using specified feeding regime, mass balance equations were applied to quantify the waste discharges from rearing tanks and treatment units. The waste discharged was found to be strongly dependent on hydraulic loading rate.