ABSTRACT
The provision of ancillary services (AS) is subject to changes associated with the energy transition. Due to new requirements, the power supply quality, reliability, and safety must be achieved by simultaneously complying with technological, economic, and environmental constraints. To mitigate these challenges, we derive factors responsible for a successful venture of all stakeholders, referred to as critical success factors (CSFs). In a Design Science Research (DSR)-based approach, twelve specific CSFs are deduced from expert interviews with transmission-, plant-, and distribution system operators. These CSFs are evaluated in a focus group discussion with academic experts afterward. We summarize practical results and findings from failed and successful projects concerning energy trading strategies, asset portfolios, grid expansion, and communication technologies. We contribute to AS knowledge and derive recommendations for further research and practice.
ABSTRACT
The achievement of the Sustainable Development Goals is being pursued worldwide. While energy production and consumption are to be oriented towards renewable energies, ecologically and socially sustainable agriculture is also a target for science and society. Due to the expansion of renewable energies, agricultural land in particular is the focus of various interest groups, from food production to energy production. In this interdisciplinary study, we show the opportunities and limits of joint synergies from the nexus of food production, energy production, energy consumption, biodiversity protection and social acceptance of renewable energies in a scenario. Biodiversity agriphotovoltaics, i.e. agriphotovoltaics in combination with biodiversity protection measures, such as flower strips, can make a valuable contribution to promoting biotope connectivity in addition to significant energy production. We show this in a GIS-based regional assessment for Lower Saxony in northern Germany. This rough spatial assessment is followed by a modelling of energy production and consumption during the cultivation of a characteristic agricultural field in the loess region of Lower Saxony. Our focus here is on the possibilities of using cable electricity or battery storage for carrying out the cultivation. In an accompanying survey of farmers regarding the use of agriphotovoltaics, we collected and evaluated their prior knowledge, experiences, and attitudes towards this technology. Finally, we show which advantages agriphotovoltaics and electrified agricultural machinery can also have for the sustainable transformation of agriculture and which challenges exist for a truly sustainable use of these technologies.
Subject(s)
Agriculture , Conservation of Natural Resources , Biodiversity , Sustainable Development , TechnologyABSTRACT
This article details the ESAFORM Benchmark 2021. The deep drawing cup of a 1 mm thick, AA 6016-T4 sheet with a strong cube texture was simulated by 11 teams relying on phenomenological or crystal plasticity approaches, using commercial or self-developed Finite Element (FE) codes, with solid, continuum or classical shell elements and different contact models. The material characterization (tensile tests, biaxial tensile tests, monotonic and reverse shear tests, EBSD measurements) and the cup forming steps were performed with care (redundancy of measurements). The Benchmark organizers identified some constitutive laws but each team could perform its own identification. The methodology to reach material data is systematically described as well as the final data set. The ability of the constitutive law and of the FE model to predict Lankford and yield stress in different directions is verified. Then, the simulation results such as the earing (number and average height and amplitude), the punch force evolution and thickness in the cup wall are evaluated and analysed. The CPU time, the manpower for each step as well as the required tests versus the final prediction accuracy of more than 20 FE simulations are commented. The article aims to guide students and engineers in their choice of a constitutive law (yield locus, hardening law or plasticity approach) and data set used in the identification, without neglecting the other FE features, such as software, explicit or implicit strategy, element type and contact model.
ABSTRACT
In relation to the fourth industrial revolution, traditional manufacturing methods cannot serve the flexibility demands related to mass customization and small series production. Rapid tooling provided by generative manufacturing has been suggested recently in the context of metal forming. Due to the high loads applied during processes to such tooling, a purposeful mechanical description of the additively manufactured (AM) materials is crucial. Until now, a comprehensive characterization approach for AM polymers is required to allow a sophisticated layout of rapid tooling. In detail, information on compressive and flexural mechanical properties of solid infilled materials made by additive manufacturing are sparsely available. These elementary mechanical properties are evaluated in the present study. They result from material specimens additively manufactured in the fused filament fabrication (FFF) process. The design of the experiments reveals significant influences of the polymer and the layer height on the resulting flexural and compressive strength and modulus as well as density, hardness, and surface roughness. As a case study, these findings are applied to a cup drawing operation based on the strongest and weakest material and parameter combination. The obtained data and results are intended to guide future applications of direct polymer additive tooling. The presented case study illustrates such an application and shows the range of manufacturing quality achievable within the materials and user settings for 3D printing.
