ABSTRACT
Tissue engineering and regenerative medicine have furnished a vast range of modalities to treat either damaged tissue or loss of soft tissue or its function. In most approaches, a temporary porous scaffold is required to support tissue regeneration. The scaffold should be designed such that the turnover synchronizes with tissue remodeling and regeneration at the implant site. Segmented polyester urethanes (PUs) used in this study were based on epsilon-caprolactone (CL) and co-monomers D,L-lactide (D,L-L) and gamma-butyrolactone (BL), and 1,4-butanediisocyanate (BDI). In vitro, the PUs were nontoxic and haemocompatible. To test in vivo biocompatibility, the PUs were further processed into porous structures and subcutaneously implanted in rats for a period up to 21 days. Tissue remodeling and scaffold turnover was associated with a mild tissue response. The tissue response was characterized by extensive vascularization through the interconnected pores, with low numbers of macrophages on the edges and stroma formation inside the pores of the implants. The tissue ingrowth appeared to be related to the extent of microphase separation of the PUs and foam morphology. By day 21, all of the PU implants were highly vascularized, confirming the pores were interconnected. Degradation of P(CL/D,L-L)-PU was observed at this time, whereas the other two PU types remained intact. The robust method reported here of manufacturing and processing, good mechanical properties, and in vivo tissue response of the porous P(CL/D,L-L)-PU and PBCL-PU makes them excellent candidates as biomaterials with an application for soft tissue remodeling, for example, for cardiovascular regeneration.
Subject(s)
Neovascularization, Physiologic/drug effects , Polyurethanes/chemistry , Polyurethanes/pharmacology , Tissue Engineering/methods , Animals , Cell Death/drug effects , Crystallization , Endotoxins/metabolism , Male , Materials Testing , Microscopy, Electron, Scanning , Polyurethanes/chemical synthesis , Porosity/drug effects , Prosthesis Implantation , Rats , Rats, Wistar , Sus scrofaABSTRACT
We investigated the effect of pre-heating a femoral component on the porosity and strength of bone cement, with or without vacuum mixing used for total hip replacement. Cement mantles were moulded in a manner simulating clinical practice for cemented hip replacement. During polymerisation, the temperature was monitored. Specimens of cement extracted from the mantles underwent bending or fatigue tests, and were examined for porosity. Pre-heating the stem alone significantly increased the mean temperature values measured within the mantle (+14.2 degrees C) (p < 0.001) and reduced the mean curing time (-1.5 min) (p < 0.001). The addition of vacuum mixing modulated the mean rise in the temperature of polymerisation to 11 degrees C and reduced the mean duration of the process by one minute and 50 seconds (p = 0.01 and p < 0.001, respectively). In all cases, the maximum temperature values measured in the mould simulating the femur were < 50 degrees C. The mixing technique and pre-heating the stem slightly increased the static mechanical strength of bone cement. However, the fatigue life of the cement was improved by both vacuum mixing and pre-heating the stem, but was most marked (+ 280 degrees C) when these methods were combined. Pre-heating the stem appears to be an effective way of improving the quality of the cement mantle, which might enhance the long-term performance of bone cement, especially when combined with vacuum mixing.
