Single-spore germination analyses reveal that calcium released during Clostridioides difficile germination functions in a feedforward loop.

Clostridioides difficile infections begin when its metabolically dormant spores germinate in response to sensing bile acid germinants alongside amino acid and divalent cation co-germinants in the small intestine. While bile acid germinants are essential for C. difficile spore germination, it is currently unclear whether both co-germinant signals are required. One model proposes that divalent cations, particularly Ca2+, are essential for inducing germination, while another proposes that either co-germinant class can induce germination. The former model is based on the finding that spores defective in releasing large stores of internal Ca2+ in the form of calcium dipicolinic acid (CaDPA) cannot germinate when germination is induced with bile acid germinant and amino acid co-germinant alone. However, since the reduced optical density of CaDPA-less spores makes it difficult to accurately measure their germination, we developed a novel automated, time-lapse microscopy-based germination assay to analyze CaDPA mutant germination at the single-spore level. Using this assay, we found that CaDPA mutant spores germinate in the presence of amino acid co-germinant and bile acid germinant. Higher levels of amino acid co-germinants are nevertheless required to induce CaDPA mutant spores to germinate relative to WT spores because CaDPA released by WT spores during germination can function in a feedforward loop to potentiate the germination of other spores within the population. Collectively, these data indicate that Ca2+ is not essential for inducing C. difficile spore germination because amino acid and Ca2+ co-germinant signals are sensed by parallel signaling pathways. IMPORTANCE Clostridioides difficile spore germination is essential for this major nosocomial pathogen to initiate infection. C. difficile spores germinate in response to sensing bile acid germinant signals alongside co-germinant signals. There are two classes of co-germinant signals: Ca2+ and amino acids. Prior work suggested that Ca2+ is essential for C. difficile spore germination based on bulk population analyses of germinating CaDPA mutant spores. Since these assays rely on optical density to measure spore germination and the optical density of CaDPA mutant spores is reduced relative to WT spores, this bulk assay is limited in its capacity to analyze germination. To overcome this limitation, we developed an automated image analysis pipeline to monitor C. difficile spore germination using time-lapse microscopy. With this analysis pipeline, we demonstrate that, although Ca2+ is dispensable for inducing C. difficile spore germination, CaDPA can function in a feedforward loop to potentiate the germination of neighboring spores.

In vitro bioassays to monitor complex chemical mixtures at a carbon-based indirect potable reuse plant.

Potable water reuse technologies are used to treat wastewater to drinking water quality to help sustain a community's water resources. California has long led the adoption of potable water reuse technologies in the United States and more states are exploring these technologies as water resources decline. Reuse technologies also need to achieve adequate reductions in microbial and chemical contaminant risks to meet public health goals and secure public acceptance. In vitro bioassays are a useful tool for screening if reuse treatment processes adequately reduce toxicity associated with a range of chemical classes that are contaminants of concern. In this study, we used an aryl hydrocarbon receptor (AhR) and an estrogen receptor luciferase bioassay to detect the presence of dioxin-like and estrogenic compounds across a 3800 m3/d carbon-based indirect potable reuse plant that uses carbon-based treatment (SWIFT-RC). Our results demonstrate significant removal of dioxin-like compounds across the SWIFT-RC treatment train. Estrogenicity declined across the treatment train for some months but was extremely variable and low with many samples falling below the method quantification level; consequently, we were not able to reliably determine estrogenicity trends for SWIFT-RC. Comparing the bioanalytical equivalent concentrations detected in the SWIFT-RC water with established monitoring trigger levels from the state of California suggests that SWIFT-RC produced water that met the bioassay guidelines. The log total organic carbon concentration and AhR assay equivalent concentrations are weakly correlated when data across all SWIFT-RC processes are included. Overall, this research demonstrates the performance of in vitro bioassays at a demonstration-scale carbon-based IPR system and highlights both the potential utility and challenges associated with these methods for assessing system performance.

Extrarenal rhabdoid tumor of anterior mediastinal location.

BACKGROUND: Rhabdoid tumors are malignant neoplasms of low prevalence, aggressive behavior, and high mortality. They were initially described as renal tumors, although tumors with the same histopathological and immunohistochemical characteristics have been discovered in other locations, mainly in the central nervous system. Few cases of mediastinal location have been reported internationally. This work aimed to describe the case of a mediastinal rhabdoid tumor. CASE REPORT: We describe the case of an 8-month-old male patient admitted to the pediatric department with dysphonia and laryngeal stridor progressing to severe respiratory distress. Contrast-enhanced computed tomography of the thorax showed a large mass with homogeneous soft tissue density, and smooth and well-defined borders, with suspicion of malignant neoplasm. Due to the oncological emergency compressing the airway, empirical chemotherapy was initiated. Subsequently, the patient underwent incomplete tumor resection due to its invasive nature. The pathology report showed morphology compatible with a rhabdoid tumor, which immunohistochemical and genetic studies corroborated. Chemotherapy and radiotherapy to the mediastinum were administered. However, the patient died three months after the initial treatment due to the aggressive behavior of the tumor. CONCLUSIONS: Rhabdoid tumors are aggressive and malignant entities difficult to control and have poor survival. Early diagnosis and aggressive treatment are required, although the 5-year survival does not exceed 40%. It is necessary to analyze and report more similar cases to establish specific treatment guidelines.

INTRODUCCIÓN: Los tumores rabdoides son neoplasias malignas de baja prevalencia, con comportamiento agresivo y alta mortalidad. Inicialmente fueron descritos como renales, aunque posteriormente se han descrito tumores con las mismas características histopatológicas e inmunohistoquímicas en otros sitios, principalmente en el sistema nervioso central. Internacionalmente se han descrito pocos casos de localización mediastinal. El objetivo del presente trabajo fue describir el caso de un tumor rabdoide de localización mediastinal. CASO CLÍNICO: Se presenta el caso de un paciente de sexo masculino de 8 meses de edad que ingresó al servicio de pediatría con disfonía y estridor laríngeo que progresó a dificultad respiratoria severa. En la tomografía computarizada contrastada de tórax se observó una gran masa homogénea con densidad de tejidos blandos, de bordes lisos y bien definidos, por lo que se sospechó una neoplasia maligna. Debido a la urgencia oncológica compresiva de la vía aérea se inició con un esquema empírico de quimioterapia. Posteriormente se sometió a resección tumoral incompleta por carácter invasor. El reporte de patología mostró morfología compatible con un tumor rabdoide, el cual se corroboró con estudios de inmunohistoquímica y genética. Se administró un esquema de quimioterapia y radioterapia al mediastino. Sin embargo, el paciente falleció a los 3 meses del inicio de tratamiento debido al comportamiento agresivo del tumor. CONCLUSIONES: Los tumores rabdoides son entidades agresivas y malignas de difícil control y con pobre supervivencia. A pesar de que se requiere un diagnóstico precoz y un tratamiento agresivo, no se ha logrado la supervivencia a 5 años mayor al 40%. Es necesario analizar una mayor cantidad de casos para establecer guías específicas de tratamiento.

Comparative Study about Dimensional Accuracy and Surface Finish of Constant-Breadth Cams Manufactured by FFF and CNC Milling.

In this work, the design, manufacture and measurement process of constant-breadth cams is presented. The motion law of the cam was designed by means of Bézier curves and the corresponding design desmodromic constraints. The cams were manufactured in two different materials employing two different processes: PLA cams with fused filament fabrication (FFF) and aluminium cams with computer numerical control (CNC) milling. The main aim of this work is to compare both types of cams regarding dimensional accuracy and surface finish, in order to evaluate if it would be possible to temporally replace a metallic cam with a plastic one during the repair of the first one. Dimensions were measured with micrometres and surface roughness with a contact roughness meter. The results show that, in diametral dimensions, similar dimensional error values were obtained for both the 3D-printed and the machined cams. However, in longitudinal dimensions, whose direction is perpendicular to the 3D-printed layers, the 3D-printed cams showed higher dimensional error than the machined ones. The average roughness Ra in the 3D-printed cams was 20 times higher than in the milled cams. According to the results, it would be recommended to temporally replace metallic cams with plastic ones in applications of low-power transmission. Given that in the literature little information is available about the measurement of 3D-printed desmodromic cams, this work will contribute to the study and analysis of this kind of 3D printed mechanism.

Extrarenal rhabdoid tumor of anterior mediastinal location / Tumor rabdoide extrarrenal de localización mediastinal anterior

Abstract Background: Rhabdoid tumors are malignant neoplasms of low prevalence, aggressive behavior, and high mortality. They were initially described as renal tumors, although tumors with the same histopathological and immunohistochemical characteristics have been discovered in other locations, mainly in the central nervous system. Few cases of mediastinal location have been reported internationally. This work aimed to describe the case of a mediastinal rhabdoid tumor. Case report: We describe the case of an 8-month-old male patient admitted to the pediatric department with dysphonia and laryngeal stridor progressing to severe respiratory distress. Contrast-enhanced computed tomography of the thorax showed a large mass with homogeneous soft tissue density, and smooth and well-defined borders, with suspicion of malignant neoplasm. Due to the oncological emergency compressing the airway, empirical chemotherapy was initiated. Subsequently, the patient underwent incomplete tumor resection due to its invasive nature. The pathology report showed morphology compatible with a rhabdoid tumor, which immunohistochemical and genetic studies corroborated. Chemotherapy and radiotherapy to the mediastinum were administered. However, the patient died three months after the initial treatment due to the aggressive behavior of the tumor. Conclusions: Rhabdoid tumors are aggressive and malignant entities difficult to control and have poor survival. Early diagnosis and aggressive treatment are required, although the 5-year survival does not exceed 40%. It is necessary to analyze and report more similar cases to establish specific treatment guidelines.

Resumen Introducción: Los tumores rabdoides son neoplasias malignas de baja prevalencia, con comportamiento agresivo y alta mortalidad. Inicialmente fueron descritos como renales, aunque posteriormente se han descrito tumores con las mismas características histopatológicas e inmunohistoquímicas en otros sitios, principalmente en el sistema nervioso central. Internacionalmente se han descrito pocos casos de localización mediastinal. El objetivo del presente trabajo fue describir el caso de un tumor rabdoide de localización mediastinal. Caso clínico: Se presenta el caso de un paciente de sexo masculino de 8 meses de edad que ingresó al servicio de pediatría con disfonía y estridor laríngeo que progresó a dificultad respiratoria severa. En la tomografía computarizada contrastada de tórax se observó una gran masa homogénea con densidad de tejidos blandos, de bordes lisos y bien definidos, por lo que se sospechó una neoplasia maligna. Debido a la urgencia oncológica compresiva de la vía aérea se inició con un esquema empírico de quimioterapia. Posteriormente se sometió a resección tumoral incompleta por carácter invasor. El reporte de patología mostró morfología compatible con un tumor rabdoide, el cual se corroboró con estudios de inmunohistoquímica y genética. Se administró un esquema de quimioterapia y radioterapia al mediastino. Sin embargo, el paciente falleció a los 3 meses del inicio de tratamiento debido al comportamiento agresivo del tumor. Conclusiones: Los tumores rabdoides son entidades agresivas y malignas de difícil control y con pobre supervivencia. A pesar de que se requiere un diagnóstico precoz y un tratamiento agresivo, no se ha logrado la supervivencia a 5 años mayor al 40%. Es necesario analizar una mayor cantidad de casos para establecer guías específicas de tratamiento.

Diagnostic Performance and Clinical Impact of 68Ga-PSMA-11 PET/CT Imaging in Early Relapsed Prostate Cancer After Radical Therapy: A Prospective Multicenter Study (IAEA-PSMA Study).

Biochemical recurrence (BCR) is a clinical challenge in prostate cancer (PCa) patients, as recurrence localization guides subsequent therapies. The use of PET with prostate-specific membrane antigen (PSMA) provides better accuracy than conventional imaging practice. This prospective, multicenter, international study was performed to evaluate the diagnostic performance and clinical impact of PSMA PET/CT for evaluating BCR in PCa patients in a worldwide scenario. Methods: Patients were recruited from 17 centers in 15 countries. Inclusion criteria were histopathologically proven prostate adenocarcinoma, previous primary treatment, clinically established BCR, and negative conventional imaging (CT plus bone scintigraphy) and MRI results for patients with PSA levels of 4-10 ng/mL. All patients underwent PET/CT scanning with 68Ga-PSMA-11. Images and data were centrally reviewed. Multivariate logistic regression analysis was applied to identify the independent predictors of PSMA-positive results. Variables were selected for this regression model on the basis of significant associations in the univariate analysis and previous clinical knowledge: Gleason score, the PSA level at the time of the PET scan, PSA doubling time, and primary treatment strategy. All patients were monitored for a minimum of 6 mo. Results: From a total of 1,004 patients, 77.7% were treated initially with radical prostatectomy and 22.3% were treated with radiotherapy. Overall, 65.1% had positive PSMA PET/CT results. PSMA PET/CT positivity was correlated with the Gleason score, PSA level at the time of the PET scan, PSA doubling time, and radiotherapy as the primary treatment (P < 0.001). Treatment was modified on the basis of PSMA PET/CT results in 56.8% of patients. PSMA PET/CT positivity rates were consistent and not statistically different among countries with different incomes. Conclusion: This multicenter, international, prospective trial of PSMA PET/CT confirmed its capability for detecting local and metastatic recurrence in most PCa patients in the setting of BCR. PSMA PET/CT positivity was correlated with the Gleason score, PSA level at the time of the PET scan, PSA doubling time, and radiotherapy as the primary treatment. PSMA PET/CT results led to changes in therapeutic management in more than half of the cohort. The study demonstrated the reliability and worldwide feasibility of PSMA PET/CT in the workup of PCa patients with BCR.

Frictional Forces of Three Types of Lingual Appliance with Self-ligating Mechanisms.

AIM AND OBJECTIVE: The present study compared the frictional forces of three types of self-ligating lingual appliances. MATERIALS AND METHODS: The lingual appliances (2D, Forestadent; Alias, Ormco; and Clippy L, Tomy International) consisted of a self-ligating bracket (second premolar) and two self-ligating tubes (first and second molars) bonded to a stainless steel jig and attached to a "drawing-friction tester." Full-size and non-full-size stainless steel archwires were tested, and the static and kinetic friction acting on six lingual appliance/wire combinations was estimated (n = 5). Three-dimensional micro-computed tomography (micro-CT) analysis of each premolar bracket was performed. The frictional forces were compared between the bracket/wire combinations using the Kruskal-Wallis and Mann-Whitney U tests. RESULTS: The Alias and Clippy L bracket/wire combinations had greater contact between the wire surfaces and bracket slots compared to the 2D bracket/wire combination. For all lingual appliances, the static and kinetic frictional forces were significantly higher for the full-size than non-full-size archwire. The 2D bracket, which had a wider outer wing, had less frictional force than the other appliances. The Alias, which had a narrower outer wing, had a significantly lower frictional force than the Clippy L. CONCLUSIONS: Frictional force was significantly higher for heavier full-size bracket/archwire combinations than for non-full-size archwires. The 2D bracket had lower frictional force due to its archwire-holding mechanism. The outer wing width may influence the frictional resistance. CLINICAL SIGNIFICANCE: The frictional forces of self-ligating lingual appliances vary, and bracket design and archwire size may influence the frictional performance.

Cytocentrifugation as an additional method to study echinoderm coelomocytes: a comparative approach combining living cells, stained preparations, and energy-dispersive x-ray spectroscopy / Citocentrifugación como un método adicional para estudiar celomitos de equinodermos: un enfoque comparativo que combina células vivas, preparaciones teñidas y espectroscopía de rayos-x de dispersión de energía

Introduction: Echinoderm coelomocytes have traditionally been investigated through a morphological approach using light microscopy, which relies on the idea of constant cell shape as a stable character. However, this can be affected by biotic or abiotic conditions. Objective: To analyze if the consistency in cell morphology offered by the cytocentrifugation method, might be used as a convenient tool to study echinoderm coelomocytes. Methods: Cells of Echinaster (Othilia) brasiliensis (Asteroidea), Holothuria (Holothuria) tubulosa (Holothuroidea), Eucidaris tribuloides, Arbacia lixula, Lytechinus variegatus, and Echinometra lucunter (Echinoidea) were spread on microscope slides by cytocentrifugation, stained, and analyzed through light microscopy. Additionally, fluorescence microscopy, scanning electron microscopy, and energy-dispersive x-ray spectroscopy were applied to cytospin preparations, to complement the analysis of granular and colorless spherulocytes of Eucidaris tribuloides. Results: Altogether, 11 cell types, including phagocytes, spherulocytes, vibratile cells, and progenitor cells were identified in the samples analyzed. The granular spherulocyte, a newly-described cell type, was observed in all Echinoidea and was very similar to the acidophilic spherulocytes of Holothuria (Holothuria) tubulosa. Conclusions: Cytocentrifugation proved to be versatile, either as the main method of investigation in stained preparations, or as a framework on which other procedures may be performed. Its ability to maintain a constant morphology allowed accurate correspondence between live and fixed/stained cells, differentiation among similar spherulocytes as well as comparisons between similar cells of Holothuroidea and Echinoidea.

Introducción: Los celomocitos de equinodermos se han investigado tradicionalmente a través de un enfoque morfológico utilizando microscopía óptica, que se basa en la idea de la forma celular constante como un carácter estable. Sin embargo, esto puede verse afectado por condiciones bióticas o abióticas. Objetivo: Analizar si la consistencia en la morfología celular que ofrece el método de citocentrifugación podría utilizarse como una herramienta conveniente para estudiar los celomocitos de equinodermos. Métodos: Células de Echinaster (Othilia) brasiliensis (Asteroidea), Holothuria (Holothuria) tubulosa (Holothuroidea), Eucidaris tribuloides, Arbacia lixula, Lytechinus variegatus y Echinometra lucunter (Echinoidea) se esparcieron en portaobjetos de microscopio por citocentrifugación, se tiñeron y analizaron mediante microscopía óptica. Adicionalmente, se aplicó microscopía de fluorescencia, microscopía electrónica de barrido y espectroscopía de rayos X con dispersión de energía a las preparaciones de citoespina, para complementar el análisis de los esferulocitos granulares e incoloros de Eucidaris tribuloides. Resultados: En total, se identificaron en las muestras analizadas 11 tipos de células, incluidos fagocitos, esferulocitos, células vibrátiles y células progenitoras. El esferulocito granular, un tipo de célula recién descrito, se observó en todos los Echinoidea y fue muy similar a los esferulocitos acidófilos de Holothuria (Holothuria) tubulosa. Conclusiones: La citocentrifugación demostró ser un método bastante versátil, ya sea como el método principal de investigación en preparaciones teñidas o como un marco en el que se pueden realizar otros procedimientos. Su capacidad para mantener una morfología constante permitió una correspondencia precisa entre las células vivas y las células fijas/teñidas, la diferenciación entre esferulocitos similares, así como comparaciones entre células similares de Holothuroidea y Echinoidea.

Endometriosis with infertility: A comprehensive review on the role of immune deregulation and immunomodulation therapy.

BACKGROUND: Endometriosis is a multifactorial pathology dependent on intrinsic and extrinsic factors, but the immune deregulation seems to play a pivotal role. In endometriosis-associated infertility, this could raise the benefit of immunomodulatory strategies to improve the results of ART. In this review, we will describe (1) sera and peritoneal fluid cytokines and immune markers; (2) autoantibodies; and (3) immunomodulatory treatments in endometriosis with infertility. METHODS: The literature research was conducted in MEDLINE, Embase, and Cochrane Library with the following keywords: "endometriosis", "unexplained miscarriage", "implantation failure", "recurrent implantation failure ¼ and « IVF-ICSI ¼, « biomarkers of autoimmunity", "TNF-α", "TNF-α antagonists", "infliximab", "adalimumab", "etanercept", "immunomodulatory treatment", "steroids", "intralipids", "intravenous immunoglobulins", "G-CSF", "pentoxyfylline". RESULTS: Several studies analyzed the levels of pro-inflammatory cytokines in sera and peritoneal fluid of endometriosis-associated infertility, in particular TNF-α. Various autoantibodies have been found in peritoneal fluid and sera of infertile endometriosis women even in the absence of clinically defined autoimmune disease, as antinuclear, anti-SSA, and antiphospholipid autoantibodies. In few uncontrolled studies, steroids and TNF-α antagonists could increase the pregnancy rates in endometriosis-associated infertility, but well-designed trials are lacking. CONCLUSION: Endometriosis is characterized by increased levels of cytokines and autoantibodies. This suggests the role of inflammation and immune cell deregulation in infertility associated with endometriosis. The strategies of immunomodulation to regulate these immune deregulations are poorly studied, and well-designed studies are necessary.

Identification and Pathogenicity of Diplodia, Neofusicoccum, Cadophora, and Diaporthe Species Associated with Cordon Dieback in Kiwifruit cultivar Hayward in Central Chile.

Dieback symptoms associated with fungal trunk pathogens cause significant economic losses for farmers of kiwifruit and other woody fruit trees worldwide. This study represents the first attempt to identify and characterize the fungal trunk pathogens associated with cordon dieback disease of kiwifruit in central Chile. Field surveys were conducted throughout the main kiwifruit-growing regions in central Chile to determine the incidence and characterize the fungal trunk pathogens associated with cordon dieback of kiwifruit cultivar Hayward through morphological, molecular, and pathogenicity studies. A total of 250 cordon samples were collected and isolations were performed on 2% acidified potato dextrose agar (APDA) plus antibiotics and Igepal. The incidence of kiwifruit cordon dieback ranged between 5% and 85% in all surveyed areas in central Chile. A total of 246 isolates were isolated and identified using culture and morphological features belonging to three fungal taxa: Diaporthaceae spp. (Diaporthe ambigua and D. australafricana; n = 133 isolates); Botryosphaeriaceae spp. (Diplodia seriata and Neofusicoccum parvum; n = 89 isolates); and Ploettnerulaceae spp. (Cadophora luteo-olivacea and C. malorum; n = 24 isolates). These were identified using phylogenetics studies of the internal transcribed spacer (ITS) region (ITS1-5.8S-ITS2) of the rDNA, part of the ß-tubulin gene (tub2), and part of the translation elongation factor 1-α gene (tef1-α). Isolates of N. parvum and D. seriata were the most virulent, causing internal brown lesions and dieback symptoms in attached green shoots, attached lignified canes, and young inoculated kiwifruits. This report is the first to describe D. seriata and C. luteo-olivacea associated with kiwifruit cordon dieback in Chile. It presents the first description of N. parvum causing kiwifruit dieback worldwide.

Isolated fallopian tube torsion associated with hydrosalpinx in a 12-year-old girl: a case report.

BACKGROUND: Isolated fallopian tube torsion associated with hydrosalpinx is a rare condition in the pediatric population. We present this unusual clinical case study in a sexually inactive girl. CASE PRESENTATION: a12-year-old Caucasian girl presented symptoms of acute abdominal pain. Pelvic ultrasound revealed a normal looking uterus and ovaries and next to left ovary a imaging compatible with hydrosalpinx. She was discharged 48 hours later after clinical monitoring with oral analgesia and normal blood workup. At 3 weeks, she was readmitted for acute abdominal pain. Leukocytosis with left shift and raised C-reactive protein were observed. Her clinical condition worsened, and complication of the preexisting hydrosalpinx was suspected. Exploratory laparoscopy confirmed torsion of the fallopian tube. Left salpingectomy was performed. Histopathologic study confirmed a fallopian tube with hemorrhagic infarct. CONCLUSION: Torsion of the fallopian tube must be considered in the event of acute abdominal pain. Early diagnosis and trying conservative management with a view to preserving fertility in this group of patients are essential.

Serial Crystallography for Structure-Based Drug Discovery.

Rational drug discovery has greatly accelerated the development of safer and more efficacious therapeutics, assisted significantly by insights from experimentally determined 3D structures of ligands in complex with their targets. Serial crystallography (SX) with X-ray free-electron lasers has enabled structural determination using micrometer- or nanometer-size crystals. This technology, applied in the past decade to solve structures of notoriously difficult-to-study drug targets at room temperature, has now been adapted for use in synchrotron radiation facilities. Ultrashort time scales allow time-resolved characterization of dynamic structural changes and pave the road to study the molecular mechanisms by 'molecular movie.' This article summarizes the latest progress in SX technology and deliberates its demanding applications in future structure-based drug discovery.

Surface Damaging of Brass and Steel Pins when Sliding over Nitrided Samples Cut by Finishing and Roughing EDM Conditions.

In the forging industry, surface quality and surface treatments of dies are crucial parameters to extend their life. These components are usually machined by milling or by Electrical Discharge Machining (EDM), and the final surface roughness depends on the machining techniques and operational conditions used in its fabrication. After milling, a nitriding treatment is widely applied to extend its service life. Nevertheless, no scientific report that informs about nitriding after EDM has been found. Accordingly, this work focuses on the wear and friction behavior of pins made of brass and medium carbon steel sliding over AISI H13 discs, made by wire EDM in the conditions of finishing and roughing. The discs are plasma nitride, and their effect on the wear during pin-on-disc tests is evaluated. In this sense, the analysis of the surface damage for the different pins will help us to understand the service life and wear evolution of the forging dies. The results show that plasma nitride reduces the friction and prevents the degradation of the pin, independently of the material of the pin, when sliding over finishing and roughing EDM conditions.

Using already-solved cases of a mass disaster event for prioritizing the search among remaining victims: a Bayesian approach.

This work presents a new method for assisting in the identification process of missing persons in several contexts, such as enforced disappearances. We apply a Bayesian technique to incorporate non-genetic variables in the construction of prior information. In that way, we can learn from the already-solved cases of a particular mass event of death, and use that information to guide the search among remaining victims. This paper describes a particular application to the proposed method to the identification of human remains of the so-called disappeared during the last dictatorship in Argentina, which lasted from 1976 until 1983. Potential applications of the techniques presented hereby, however, are much wider. The central idea of our work is to take advantage of the already-solved cases within a certain event to use the gathered knowledge to assist in the investigation process, enabling the construction of prioritized rankings of victims that could correspond to each certain unidentified human remains.

Self-assembly of supramolecular structure based on copper-lipopeptides isolated from e-waste bioleaching liquor.

Supramolecular structures were produced by auto-assembling CuCN blocks derived from copper-lipopeptides (CuLps) isolated from bioleaching liquor. Lipopeptides produced by B. subtilis Hyhel1 have been previously related as responsible by bioleaching and intracellular copper crystal production. However, there were no records relating CuLps to extracellular copper crystal production. To study this process, CuLps were isolated from bioleaching liquor and kept at 8 °C to facilitate the CuLps aggregation. After three months, blue spheres (BS) were observed in the CuLp fraction. These spheres were then analyzed by SEM-EDS, MALDI-TOF-MS/MS, GC-MS and FTIR. SEM-EDS analysis showed that they were formed by polycrystalline structures mainly composed by Cu (46.5% m/m) and positioned concentrically. MALDI-TOF-MS/MS and GCMS showed that peptide bonds of CuLp were broken, producing lipid chains and amino acids free. The FTIR of BS showed three nitro groups: CN, NN and NO, which were not found in the control. These data suggest that the CuLp amino acid produced a CN group linked to copper, as CuCN blocks, that auto-assembled in supramolecular structures. This phenomenon could be explored as a method to recover copper and to obtain supramolecular CuCN structures, which in turn may be used as template for superconductor or computing devices.