Broadening spectral responses and achieving environmental stability in SnS2/Ag-NPs/HfO2 flexible phototransistors.

Layered two-dimensional (2D) materials have gained popularity thanks to their atomically thin physique and strong coupling with light. Here, we investigated a wide band gap (≥ 2 eV) 2D material, i.e., tin disulfide (SnS2), and decorated it with silver nanoparticles, Ag-NPs, for broadband photodetection. Our results show that the SnS2/Ag-NPs devices exhibit broadband photodetection ranging from the ultraviolet to near-infrared (250-1050 nm) spectrum with decreased rise/decay times from 8/20 s to 7/16 s under 250 nm wavelength light compared to the bare SnS2 device. This is attributed to the localized surface plasmon resonance effect and the wide band gap of SnS2 crystal. Furthermore, the HfO2-passivated SnS2/Ag-NPs devices exhibited high photodetection performance in terms of photoresponsivity (∼12 500 A W-1), and external quantum efficiency (∼6 × 106%), which are significantly higher compared to those of bare SnS2. Importantly, after HfO2 passivation, the SnS2/Ag-NPs photodetector maintained the stable performance for several weeks with merely ∼5.7% reduction in photoresponsivity. Lastly, we fabricated a flexible SnS2/Ag-NPs photodetector, which shows excellent and stable performance under various bending curvatures (0, 20, and 10 mm), as it retains ∼80% of its photoresponsivity up to 500 bending cycles. Thus, our study provides a simple route to realize broadband and stable photoactivity in flexible 2D material-based devices.

A Novel Biosensing Approach: Improving SnS2 FET Sensitivity with a Tailored Supporter Molecule and Custom Substrate.

The exclusive features of two-dimensional (2D) semiconductors, such as high surface-to-volume ratios, tunable electronic properties, and biocompatibility, provide promising opportunities for developing highly sensitive biosensors. However, developing practical biosensors that can promptly detect low concentrations of target analytes remains a challenging task. Here, a field-effect-transistor comprising n-type transition metal dichalcogenide tin disulfide (SnS2 ) is developed over the hexagonal boron nitride (h-BN) for the detection of streptavidin protein (Strep.) as a target analyte. A self-designed receptor based on the pyrene-lysine conjugated with biotin (PLCB) is utilized to maintain the sensitivity of the SnS2 /h-BN FET because of the π-π stacking. The detection capabilities of SnS2 /h-BN FET are investigated using both Raman spectroscopy and electrical characterizations. The real-time electrical measurements exhibit that the SnS2 /h-BN FET is capable of detecting streptavidin at a remarkably low concentration of 0.5 pm, within 13.2 s. Additionally, the selectivity of the device is investigated by measuring its response against a Cow-like serum egg white protein (BSA), having a comparative molecular weight to that of the streptavidin. These results indicate a high sensitivity and rapid response of SnS2 /h-BN biosensor against the selective proteins, which can have significant implications in several fields including point-of-care diagnostics, drug discovery, and environmental monitoring.

Optically Reconfigurable Complementary Logic Gates Enabled by Bipolar Photoresponse in Gallium Selenide Memtransistor.

To avoid the complexity of the circuit for in-memory computing, simultaneous execution of multiple logic gates (OR, AND, NOR, and NAND) and memory behavior are demonstrated in a single device of oxygen plasma-treated gallium selenide (GaSe) memtransistor. Resistive switching behavior with RON /ROFF ratio in the range of 104 to 106 is obtained depending on the channel length (150 to 1600 nm). Oxygen plasma treatment on GaSe film created shallow and deep-level defect states, which exhibit carriers trapping/de-trapping, that lead to negative and positive photoconductance at positive and negative gate voltages, respectively. This distinguishing feature of gate-dependent transition of negative to positive photoconductance encourages the execution of four logic gates in the single memory device, which is elusive in conventional memtransistor. Additionally, it is feasible to reversibly switch between two logic gates by just adjusting the gate voltages, e.g., NAND/NOR and AND/NAND. All logic gates presented high stability. Additionally, memtransistor array (1×8) is fabricated and programmed into binary bits representing ASCII (American Standard Code for Information Interchange) code for the uppercase letter "N". This facile device configuration can provide the functionality of both logic and memory devices for emerging neuromorphic computing.

Low-Power Negative-Differential-Resistance Device for Sensing the Selective Protein via Supporter Molecule Engineering.

Van der Waals (vdW) heterostructures composed of atomically thin two-dimensional (2D) materials have more potential than conventional metal-oxide semiconductors because of their tunable bandgaps, and sensitivities. The remarkable features of these amazing vdW heterostructures are leading to multi-functional logic devices, atomically thin photodetectors, and negative differential resistance (NDR) Esaki diodes. Here, an atomically thin vdW stacking composed of p-type black arsenic (b-As) and n-type tin disulfide (n-SnS2 ) to build a type-III (broken gap) heterojunction is introduced, leading to a negative differential resistance device. Charge transport through the NDR device is investigated under electrostatic gating to achieve a high peak-to-valley current ratio (PVCR), which improved from 2.8 to 4.6 when the temperature is lowered from 300 to 100 K. At various applied-biasing voltages, all conceivable tunneling mechanisms that regulate charge transport are elucidated. Furthermore, the real-time response of the NDR device is investigated at various streptavidin concentrations down to 1 pm, operating at a low biasing voltage. Such applications of NDR devices may lead to the development of cutting-edge electrical devices operating at low power that may be employed as biosensors to detect a variety of target DNA (e.g., ct-DNA) and protein (e.g., the spike protein associated with COVID-19).

Reconfigurable carrier type and photodetection of MoTe2 of various thicknesses by deep ultraviolet light illumination.

Tuning of the Fermi level in transition metal dichalcogenides (TMDCs) leads to devices with excellent electrical and optical properties. In this study, we controlled the Fermi level of MoTe2 by deep ultraviolet (DUV) light illumination in different gaseous environments. Specifically, we investigated the reconfigurable carrier type of an intrinsic p-MoTe2 flake that gradually transformed into n-MoTe2 after illumination with DUV light for 30, 60, 90, 120, 160, 250, 500, 900, and 1200 s in a nitrogen (N2) gas environment. Subsequently, we illuminated this n-MoTe2 sample with DUV light in oxygen (O2) gas and reversed its carrier polarity toward p-MoTe2. However, using this doping scheme to reveal the effect of DUV light on various layers (3-30 nm) of MoTe2 is challenging. The DUV + N2 treatment significantly altered the polarity of MoTe2 of different thicknesses from p-type to n-type under the DUV + N2 treatment, but the DUV + O2 treatment did not completely alter the polarity of thicker n-MoTe2 flakes to p-type. In addition, we investigated the photoresponse of MoTe2 after DUV light treatment in N2 and O2 gas environments. From the time-resolved photoresponsivity at different polarity states of MoTe2, we have shown that the response time of the DUV + O2 treated p-MoTe2 is faster than that of the pristine and doped n-MoTe2 films. These carrier polarity modulations and photoresponse paves the way for wider applications of MoTe2 in optoelectronic devices.

Tunable spin injection and detection across a van der Waals interface.

Van der Waals heterostructures with two-dimensional magnets offer a magnetic junction with an atomically sharp and clean interface. This attribute ensures that the magnetic layers maintain their intrinsic spin-polarized electronic states and spin-flipping scattering processes at a minimum level, a trait that can expand spintronic device functionalities. Here, using a van der Waals assembly of ferromagnetic Fe3GeTe2 with non-magnetic hexagonal boron nitride and WSe2 layers, we demonstrate electrically tunable, highly transparent spin injection and detection across the van der Waals interfaces. By varying an electrical bias, the net spin polarization of the injected carriers can be modulated and reversed in polarity, which leads to sign changes of the tunnelling magnetoresistance. We attribute the spin polarization reversals to sizable contributions from high-energy localized spin states in the metallic ferromagnet, so far inaccessible in conventional magnetic junctions. Such tunability of the spin-valve operations opens a promising route for the electronic control of next-generation low-dimensional spintronic device applications.

The non-volatile electrostatic doping effect in MoTe2 field-effect transistors controlled by hexagonal boron nitride and a metal gate.

The electrical and optical properties of transition metal dichalcogenides (TMDs) can be effectively modulated by tuning their Fermi levels. To develop a carrier-selectable optoelectronic device, we investigated intrinsically p-type MoTe2, which can be changed to n-type by charging a hexagonal boron nitride (h-BN) substrate through the application of a writing voltage using a metal gate under deep ultraviolet light. The n-type part of MoTe2 can be obtained locally using the metal gate pattern, whereas the other parts remain p-type. Furthermore, we can control the transition rate to n-type by applying a different writing voltage (i.e., - 2 to - 10 V), where the n-type characteristics become saturated beyond a certain writing voltage. Thus, MoTe2 was electrostatically doped by a charged h-BN substrate, and it was found that a thicker h-BN substrate was more efficiently photocharged than a thinner one. We also fabricated a p-n diode using a 0.8 nm-thick MoTe2 flake on a 167 nm-thick h-BN substrate, which showed a high rectification ratio of ~ 10-4. Our observations pave the way for expanding the application of TMD-based FETs to diode rectification devices, along with optoelectronic applications.

Deep-Ultraviolet (DUV)-Induced Doping in Single Channel Graphene for Pn-Junction.

The electronic properties of single-layer, CVD-grown graphene were modulated by deep ultraviolet (DUV) light irradiation in different radiation environments. The graphene field-effect transistors (GFETs), exposed to DUV in air and pure O2, exhibited p-type doping behavior, whereas those exposed in vacuum and pure N2 gas showed n-type doping. The degree of doping increased with DUV exposure time. However, n-type doping by DUV in vacuum reached saturation after 60 min of DUV irradiation. The p-type doping by DUV in air was observed to be quite stable over a long period in a laboratory environment and at higher temperatures, with little change in charge carrier mobility. The p-doping in pure O2 showed ~15% de-doping over 4 months. The n-type doping in pure N2 exhibited a high doping effect but was highly unstable over time in a laboratory environment, with very marked de-doping towards a pristine condition. A lateral pn-junction of graphene was successfully implemented by controlling the radiation environment of the DUV. First, graphene was doped to n-type by DUV in vacuum. Then the n-type graphene was converted to p-type by exposure again to DUV in air. The n-type region of the pn-junction was protected from DUV by a thick double-coated PMMA layer. The photocurrent response as a function of Vg was investigated to study possible applications in optoelectronics.

Ultrafast and Highly Stable Photodetectors Based on p-GeSe/n-ReSe2 Heterostructures.

Two-dimensional transition-metal dichalcogenide (2D-TMD) semiconductors and their van der Waals heterostructures (vdWHs) have attracted great attention because of their tailorable band-engineering properties and provide a propitious platform for next-generation extraordinary performance energy-harvesting devices. Herein, we reported unique and unreported germanium selenide/rhenium diselenide (p-GeSe/n-ReSe2) 2D-TMD vdWH photodetectors for extremely sensitive and high-performance photodetection in the broadband spectral range (visible and near-infrared range). A high and gate-tunable rectification ratio (RR) of 7.34 × 105 is achieved, stemming from the low Schottky barrier contacts and sharp interfaces of the p-GeSe/n-ReSe2 2D-TMD vdWHs. In addition, a noticeably high responsivity (R = 2.89 × 105 A/W) and specific detectivity (D* = 4.91 × 1013 Jones), with good external quantum efficiency (EQE = 6.1 × 105) are obtained because of intralayer and interlayer transition of excitations, enabling the broadband photoresponse (λ = 532-1550 nm) at room temperature. Furthermore, fast response times of 16-20 µs are estimated under the irradiated laser of λ = 1550 nm because of interlayer exciton transition. Such a TMD-based compact system offers an opportunity for the realization of high-performance broadband infrared photodetectors.

High performance complementary WS2 devices with hybrid Gr/Ni contacts.

Two-dimensional (2D) transition metal dichalcogenides have attracted vibrant interest for future solid-state device applications due to their unique properties. However, it is challenging to realize 2D material based high performance complementary devices due to the stubborn Fermi level pinning effect and the lack of facile doping techniques. In this paper, we reported a hybrid Gr/Ni contact to WS2, which can switch carrier types from n-type to p-type in WS2. The unorthodox polarity transition is attributed to the natural p-doping of graphene with Ni adsorption and the alleviation of Fermi level pinning in WS2. Furthermore, we realized asymmetric Ni and Gr/Ni hybrid contacts to a multilayer WS2 device, and we observed synergistic p-n diode characteristics with excellent current rectification exceeding 104, and a near unity ideality factor of 1.1 (1.6) at a temperature of 4.5 K (300 K). Lastly, our WS2 p-n device exhibits high performance photovoltaic ability with a maximum photoresponsivity of 4 × 104 A W-1 at 532 nm wavelength, that is 108 times higher than that of graphene and 50 times better than that of the monolayer MoS2 photodetector. This doping-free carrier type modulation technique will pave the way to realize high performance complementary electronics and optoelectronic devices based on 2D materials.

WS2/GeSe/WS2 Bipolar Transistor-Based Chemical Sensor with Fast Response and Recovery Times.

Vertical heterostructures of transition-metal dichalcogenide semiconductors have attracted considerable attention and offer new opportunities in electronics and optoelectronics for the development of innovative and multifunctional devices. Here, we designed a novel and compact vertically stacked two-dimensional (2D) n-WS2/p-GeSe/n-WS2 van der Waals (vdW) heterojunction bipolar transistor (2D-HBT)-based chemical sensor. The performance of the 2D-HBT vdW heterostructure with different base thicknesses is investigated by two configurations, namely, common-emitter and common-base configurations. The 2D-HBT vdW heterostructure exhibited intriguing electrical characteristics of current amplification with large gains of α ≈ 1.11 and ß ≈ 20.7. In addition, 2D-HBT-based devices have been investigated as chemical sensors for the detection of NH3 and O2 gases at room temperature. The effects of different environments, such as air, vacuum, O2, and NH3, were also analyzed in dark conditions, and with a light of 633 nm wavelength, ultrahigh sensitivity and fast response and recovery times (6.55 and 16.2 ms, respectively) were observed. These unprecedented outcomes have huge potential in modern technology in the development of low-power amplifiers and gas sensors.

WSe2 Homojunction p-n Diode Formed by Photoinduced Activation of Mid-Gap Defect States in Boron Nitride.

A single nanoflake lateral p-n diode (in-plane) based on a two-dimensional material can facilitate electronic architecture miniaturization. Here, a novel lateral homojunction p-n diode of a single WSe2 nanoflake is fabricated by photoinduced doping via optical excitation of defect states in an h-BN nanoflake upon illumination. This lateral diode is fabricated using a mechanical exfoliation technique by stacking the WSe2 nanoflake partially on the h-BN and Si substrates. The carrier type in the part of the WSe2 film on the h-BN substrate is inverted and a built-in potential difference is formed, ranging from 5.0 to 4.50 eV, which is measured by Kelvin probe force microscopy. The contact potential difference across the junction of p-WSe2 and n-WSe2 is found to be ∼492 mV. The lateral diode shows an excellent rectification ratio, up to ∼3.9 × 104, with an ideality factor of ∼1.1. A typical self-biased photovoltaic behavior is observed at the p-n junction upon the illumination of incident light, that is, a positive open-circuit voltage (Voc) is generated, that is, voltage obtained (at Ids = 0 V), and also a negative short-circuit current (Isc) is generated, that is, current obtained (at Vds = 0 V). The presence of built-in potential in the proposed homojunction diode establishes Isc and Voc upon illumination, which can be implemented for a self-powered photovoltaic system in future electronics. The proposed doping technique can be effectively applied to form planar homojunction devices without a photoresist for future electronic and optoelectronic applications.

Asymmetric electrode incorporated 2D GeSe for self-biased and efficient photodetection.

2D layered germanium selenide (GeSe) with p-type conductivity is incorporated with asymmetric contact electrode of chromium/Gold (Cr/Au) and Palladium/Gold (Pd/Au) to design a self-biased, high speed and an efficient photodetector. The photoresponse under photovoltaic effect is investigated for the wavelengths of light (i.e. ~220, ~530 and ~850 nm). The device exhibited promising figures of merit required for efficient photodetection, specifically the Schottky barrier diode is highly sensitive to NIR light irradiation at zero voltage with good reproducibility, which is promising for the emergency application of fire detection and night vision. The high responsivity, detectivity, normalized photocurrent to dark current ratio (NPDR), noise equivalent power (NEP) and response time for illumination of light (~850 nm) are calculated to be 280 mA/W, 4.1 × 109 Jones, 3 × 107 W-1, 9.1 × 10-12 WHz-1/2 and 69 ms respectively. The obtained results suggested that p-GeSe is a novel candidate for SBD optoelectronics-based technologies.

Distinct Detection of Thermally Induced Spin Voltage in Pt/WS2/Ni81Fe19 by the Inverse Spin Hall Effect.

Conversion of heat into a spin current by means of the spin Seebeck effect (SSE) is one of the exciting topics in spin caloritronics. By use of this technique, the excess heat may be transformed into a valuable electric voltage by coupling SSE with the inverse spin Hall effect (ISHE). In this study, a thermal gradient and an in-plane magnetic field are used as the driving power to mobilize the spin electrons to produce SSE. A spin voltage is detected by ISHE in the Ni81Fe19 heterostructure by means of a WS2/Pt strip. Using WS2 sheets of different thicknesses, we obtained a large spin Seebeck coefficient of 0.72 µV/K, which is 12 times greater than the conventional spin Seebeck coefficient observed in Pt/Ni81Fe19 bilayer devices. We observe the thickness dependence of tungsten disulfide (WS2) flakes and the polarity reversal of pure SSE signals that are measured without influence from the other thermoelectric effects in our Pt/WS2/Ni81Fe19 device-the most intriguing feature of this study. Without the electric charge conduction, the spins are distributed over a longer distance that is greater than the spin diffusion length of the Ni81Fe19 layer. Such features are strongly desired for designing the efficient spin-caloritronics devices that may be used in the thermoelectric spin generators and the temperature sensors such as thermocouples.

MoTe2 van der Waals homojunction p-n diode with low resistance metal contacts.

Although many studies have focused on transition metal dichalcogenide heterojunction p-n diodes, homojunction p-n diodes still require more extensive study. We present a van der Waals p-MoTe2/n-MoTe2 homojunction p-n diode with low resistance metal contacts. Such two-dimensional homojunction devices with low contact resistance can be used in various applications in the electronics industry. The device structure consists of stacked nanoflakes of p-MoTe2 and n-MoTe2. In this investigation, we implement a deep ultraviolet light-driven doping technique in a N2 gas environment to modulate the carrier concentration in a multilayered p-MoTe2 flake, which is consequently inverted to n-MoTe2. The deep ultraviolet light-driven doping provides environmental stability in the treated devices. We use ohmic metal contacts for the homojunction p-n diode and achieve excellent gate-dependent rectifying behavior with a rectification ratio of up to 104. Contrary to heterojunctions, the ideality factor is found to be 1.05 for the zero gate bias, indicative of good interface quality at the p-MoTe2/n-MoTe2 junction, owing to low charge trapping sites at the homojunction interface. In addition, low-temperature measurements are performed to determine the barrier height for different gate biases. This study contributes to research on van der Waals homojunction p-n diodes, which show much potential for nanoelectronic and optoelectronic devices.

Black Phosphorus-IGZO van der Waals Diode with Low-Resistivity Metal Contacts.

There have been a few studies of heterojunctions composed of two-dimensional transition-metal dichalcogenides (TMDs) and an oxide layer, but such studies of high-performance electric and optoelectronic devices are essential. Such heterojunctions with low-resistivity metal contacts are needed by the electronics industry to fabricate efficient diodes and photovoltaic devices. Here, a van der Waals heterojunction composed of p-type black phosphorus (p-BP) and n-type indium-gallium-zinc oxide (n-IGZO) films with low-resistivity metal contacts is reported, and it demonstrates high rectification. The low off-state leakage current in the thick IGZO film accounts for the high rectification ratio in a sharp interface of p-BP/n-IGZO devices. For electrostatic gate control, an ionic liquid is introduced to achieve a high rectification ratio of 9.1 × 104. The photovoltaic measurements of p-BP/n-IGZO show fast rise and decay times, significant open-circuit voltage and short-circuit current, and a high photoresponsivity of 418 mA/W with a substantial external quantum efficiency of 12.1%. The electric and optoelectronic characteristics of TMDs/oxide layer van der Waals heterojunctions are attractive for industrial applications in the near future.

Observation of giant spin-orbit interaction in graphene and heavy metal heterostructures.

Graphene is a promising material demonstrating some interesting phenomena such as the spin Hall effect, bipolar transistor effect, and non-trivial topological states. However, graphene has an intrinsically small spin-orbit interaction (SOI), making it difficult to apply in spintronic devices. The electronic band structure of graphene makes it possible to develop a systematic method to enhance SOI extrinsically. In this study, we designed a graphene field-effect transistor with a Pb layer intercalated between graphene (Gr) and Au layers and studied the effect on the strength of the SOI. The SOI in our system was significantly increased to 80 meV, which led to a giant non-local signal (∼180 Ω) at room temperature due to the spin Hall effect. Further, we extract key parameters of spin transport from the length and width dependence of non-local measurement. To support these findings, we also measured the temperature and gate-dependent weak localization (WL) effect. We obtained the magnitude of the SOI and spin relaxation time of Gr via quantitative analysis of WL. The SOI magnitudes estimated from the non-local signal and the WL effect are close in value. The enhancement of the SOI of Gr at room temperature is a potential simple manipulation method to explore the use of this material for spin-based applications.

Ultimate limit in size and performance of WSe2 vertical diodes.

Precise doping-profile engineering in van der Waals heterostructures is a key element to promote optimal device performance in various electrical and optical applications with two-dimensional layered materials. Here, we report tungsten diselenide- (WSe2) based pure vertical diodes with atomically defined p-, i- and n-channel regions. Externally modulated p- and n-doped layers are respectively formed on the bottom and the top facets of WSe2 single crystals by direct evaporations of high and low work-function metals platinum and gadolinium, thus forming atomically sharp p-i-n heterojunctions in the homogeneous WSe2 layers. As the number of layers increases, charge transport through the vertical WSe2 p-i-n heterojunctions is characterized by a series of quantum tunneling events; direct tunneling, Fowler-Nordheim tunneling, and Schottky emission tunneling. With optimally selected WSe2 thickness, our vertical heterojunctions show superb diode characteristics of an unprecedentedly high current density and low turn-on voltages while maintaining good current rectification.

Comparison of Electrical and Photoelectrical Properties of ReS2 Field-Effect Transistors on Different Dielectric Substrates.

As one of the newly discovered transition-metal dichalcogenides (TMDs), rhenium disulfide (ReS2) has been investigated mostly because of its unique characteristics such as the direct band gap nature even in bulk form, which is not prominent in other TMDs (e.g., MoS2, WSe2, etc.). However, this material possesses a low mobility and an on/off ratio, which restrict its usage in high-speed and fast switching applications. Low mobilities or on/off ratios can also be caused by substrate scattering as well as environmental effects. In this study, we used few-layer ReS2 (FL-ReS2) as a channel material to investigate the substrate-dependent mobility, current on/off ratio, Schottky barrier height (SBH), and trap density of states of different dielectric substrates. The hexagonal boron nitride (h-BN)/FL-ReS2/h-BN structure was observed to exhibit a high mobility of 45 cm2 V-1 s-1, current on/off ratio of about 107, the lowest SBH of about 12 mV at a zero back-gate voltage ( Vbg), and a low trap density of states of about 5 × 1013 cm-3. These quantities are reasonably superior compared to the FL-ReS2 devices on SiO2 substrates. We also observed a nearly 5-fold improvement in the photoresponsivity and external quantum efficiency values for the FL-ReS2 devices on h-BN substrates. We believe that the photonic characteristics of TMDs can be improved by using h-BN as the substrate and capping layer.

Visualizing Degradation of Black Phosphorus Using Liquid Crystals.

Black Phosphorus (BP) is an excellent material from the post graphene era due to its layer dependent band gap, high mobility and high Ion/Ioff. However, its poor stability in ambient poses a great challenge for its practical and long-term usage. The optical visualization of the oxidized BP is the key and the foremost step for its successful passivation from the ambience. Here, we have conducted a systematic study of the oxidation of the BP and developed a technique to optically identify the oxidation of the BP using Liquid Crystal (LC). It is interesting to note that we found that the rapid oxidation of the thin layers of the BP makes them disappear and can be envisaged by using the alignment of the LC. The molecular dynamics simulations also proved the preferential alignment of the LC on the oxidized BP. We believe that this simple technique will be effective in passivation efforts of the BP, and will enable it for exploitation of its properties in the field of electronics.