Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 50
Filter
1.
Clin Oral Investig ; 28(8): 418, 2024 Jul 08.
Article in English | MEDLINE | ID: mdl-38976053

ABSTRACT

OBJECTIVE: The study aimed to investigate the sinus membrane thickness (SMT) adjacent to healthy endodontically-treated maxillary molars with or without protruded apical foramen into the sinus cavity using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Images of 207 non-smoker patients aged 18-40 were retrospectively analyzed, 140 were endodontically treated, and 136 were without endodontic treatment. Patients with any sinus pathology, teeth that have symptoms, or poor root filling were excluded. Study groups consisted of Group EM-I (endodontically treated and protruded apical foramen), Group EM-C (endodontically treated and contacted apical foramen), and similarly without endodontic treatment; Group M-I and Group M-C. SMT upon the mesial, distal, and palatal roots was measured. One-way ANOVA and Student's t-tests were performed. RESULTS: Group EM-I had the thickest sinus membrane compared to other groups (p = 0.013). SMT values were 2.37-2.60 mm in Group EM-I, and 1.34-1.58 mm in other groups. Thickening (> 2 mm) percentages were 33.45% in Group EM-I and between 4.25 and 8.25% in other groups. No statistical difference was detected between first and second molars and genders (p > 0.05). CONCLUSION: When the apical foramen protruded into the sinus cavity, the conventional root canal treatment caused a minimal (between 2.37 mm and 2.60 mm) sinus membrane thickening with a rate of 33.45% based upon CBCT examinations.


Subject(s)
Cone-Beam Computed Tomography , Maxillary Sinus , Molar , Humans , Male , Female , Molar/diagnostic imaging , Retrospective Studies , Adult , Adolescent , Maxillary Sinus/diagnostic imaging , Maxillary Sinus/anatomy & histology , Tooth, Nonvital/diagnostic imaging , Maxilla/diagnostic imaging , Root Canal Therapy
2.
Eur Oral Res ; 58(2): 64-69, 2024 May 05.
Article in English | MEDLINE | ID: mdl-39011172

ABSTRACT

Purpose: The aim of this in vitro study was to compare the organic tissue dissolution capacities of 3 different irrigation agitation techniques (IATs) in artificial internal root resorption cavities (IRCs). Materials and methods: Ninety freshly extracted maxillary human incisors were selected. After decoronation procedure, the roots were split longitudinally, and a standard IRC were prepared in the canals on each half of the roots. Then, the bovine pulp samples (~2,3 mg) were previously weighed and placed into the cavities. The root fragments were reassembled and cemented to create a circular IRC within the canal. Teeth samples were randomly divided into 6 groups (n=15); sodium chlorur (NaCl) and sonic irrigation (SI), sodium hypochlorite (NaOCl) and SI, NaCl and passive ultrasonic irrigation (PUI), NaOCl and PUI, NaCl and laser activated irrigation (LAI), NaOCl and LAI. After that, the teeth were decemented and the tissue samples inside the cavities were weighed again. The percentage of weight loss was calculated and statistically analyzed. Results: SI has significantly more successful results than PUI and LAI in groups which the irrigant was NaCl. There was also a significant difference between LAI and PUI in groups which the irrigant was NaOCl (Group 6 ˃ Group 4, p=0.003). There was no significant difference between LAI and SI with NaOCl. Conclusion: Complete dissolution of bovine pulp tissue from IRCs was not achieved by any tested techniques. However, the LAI with NaOCl was more effective than other IATs. In addition, there is no significant difference between the LAI and SI with NaOCl.

3.
Aust Endod J ; 49(1): 159-164, 2023 Apr.
Article in English | MEDLINE | ID: mdl-35679483

ABSTRACT

This study compared the effects of 3 different cavity disinfection protocols (CDP) on the shear bond strength (SBS) of resin-modified glass ionomer cement (RM-GIC) to mineral trioxide aggregate (MTA). One hundred eighty standard holes were prepared and filled with MTA. They then divided into 3 main groups based on the chosen time intervals (15 min, 24 h, and 72 h). Main groups were divided into 3 subgroups based on the CDP [chlorhexidine gluconate (CHX), ozone, laser, and control]. RM-GIC was applied on MTA after CDP for all groups. A universal testing device was then used for test and the data was statistically analysed. CHX showed significantly lower SBS values except ozone and laser than the control (p < 0.05). There were no statistically significant differences among the time intervals. As a result, CHX decreased the bond strength between the MTA and RM-GIC while ozone and laser had no negative effect.


Subject(s)
Dental Bonding , Glass Ionomer Cements , Glass Ionomer Cements/chemistry , Composite Resins/chemistry , Disinfection , Resins, Plant , Shear Strength , Materials Testing
4.
Aust Endod J ; 49 Suppl 1: 179-186, 2023 Sep.
Article in English | MEDLINE | ID: mdl-36354104

ABSTRACT

This study aims to evaluate the ability of Raypex 6, Propex Pixi, Dentaport ZX, Apex ID, Propex II and Dr.'s Finder NEO to detect minimum root canal perforation diameter. One hundred single-rooted, extracted human teeth were artificially perforated by 5 burs in different diameters (0.25-1.25 mm) in 5 mm above the apex. Twenty teeth were assigned to each group. The actual canal lengths (AL) were measured under stereomicroscope followed by a measurement of electronic canal length (EL) using each electronic apex locator (EAL). None of the EALs were able to detect the perforation at diameters of 0.50 and 0.25 mm. Although all EALs used in our study were unable to detect perforations at diameters of 0.5 mm and 0.25 mm, they were highly successful in the determination of simulated root perforations at diameters of 1.25, 1 and 0.75 mm.


Subject(s)
Dental Pulp Cavity , Tooth Apex , Humans , Odontometry , Root Canal Therapy , Electronics , Root Canal Preparation
5.
Dent Med Probl ; 58(4): 463-472, 2021.
Article in English | MEDLINE | ID: mdl-34978766

ABSTRACT

OBJECTIVES: The aim of this study was to evaluate the SBS of pre-sintered and sintered zirconia to a selfadhesive resin cement after various treatment (air abrasion and the Nd:YAG laser irradiation at varying power levels -1 W, 2 W and 3 W). MATERIAL AND METHODS: Ninety-nine zirconia specimens were prepared and divided into 3 groups: control (with no surface treatment); and pre-sintered and sintered groups with surface treatment. Surface treatment was applied before sintering in the pre-sintered group and after sintering in the sintered group. After following all protocols, a resin cement was layered on the zirconia surface. Shear bond strength was measured using a universal testing machine. The results were subjected to the statistical analysis. The surface topography and phase transformation of zirconia were evaluated using the atomic force microscopy (AFM), scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses after surface treatment. RESULTS: The laser irradiation (3 W, 1 W and 2 W) of the pre-sintered zirconia surface resulted in the highest SBS values (p < 0.001), while the lowest SBS values were obtained with airborne particle abrasion of the pre-sintered and sintered zirconia surfaces. CONCLUSIONS: Laser irradiation increased the SBS of pre-sintered zirconia to a resin cement. Surface treatment with air abrasion had a lesser effect on the SBS values.


Subject(s)
Dental Bonding , Resin Cements , Air Abrasion, Dental/methods , Dental Cements , Humans , Materials Testing , Resin Cements/chemistry , Surface Properties , Zirconium
6.
Chin Herb Med ; 12(2): 178-182, 2020 Apr.
Article in English | MEDLINE | ID: mdl-36119798

ABSTRACT

Objective: Due to the many negative properties of sodium hypochlorite used in current root canal treatment, interest in biocompatible natural agents is increasing day by day. The aim of this study was to evaluate whether various extract solutions of Sapindus mukorossi have dissolution effects on human pulp tissues. Methods: Primarily powder extracts were obtained by extracting fruit shells of S. mukorossi in different solvents (ethanol, methanol, buthanol and distilled water). The test solutions were prepared and randomly separated into six groups with 10 samples in each group: ethanol extract, methanol extract, butanol extract, distilled water extract of S. mukorossi, sodium hypochlorite (NaOCl) and the control group. Among these, S. mukorossi extracts were separated into two subgroups, depending on their concentration level (50 µg/mL and 100 µg/mL). The pulp tissues of freshly extracted human molars were used for dissolution test. The weights of the pulpal tissues were measured and recorded for two times after the samples were placed in the solutions. Statistical analysis for all descriptive statistics was performed using SPSS 22 (P < 0.05). Results: Our results showed that maximum percent yield of preparation was obtained in methanol extract of S. mukorossi. Among all of the groups, the best dissolution capacity was seen in the NaOCl group (positive control group). Among S. mukorossi groups, the best tissue solvent solution was found in SMM group at 50 µg/mL and SMB group at 100 µg/mL. Conclusion: The different extracts of S. mukorossi had a capacity to dissolve pulp tissue but this capacity was less than NaOCl. Therefore, further studies will enable the creation of a commercial solution for clinical use by increasing the effectiveness of S. mukorossi while combining it with other endodontic irrigation solutions.

7.
Dent Med Probl ; 57(4): 393-400, 2020.
Article in English | MEDLINE | ID: mdl-33444488

ABSTRACT

BACKGROUND: Root canal disinfection includes mechanical, chemical and biological struggle against microorganisms (MOs). Photodynamic therapy (PDT) and nanoparticle (NP) agents may be proposed as an alternative for use against intracanal infections due to their ability to disrupt biofilm and prevent bacterial adhesion to dentin. The use of NP agents in combination with light/photosensitizer (PS) agents increases the efficiency of PDT in root canal disinfection. OBJECTIVES: The aim of the study was to evaluate the effect of light application - PDT - on the antibacterial activity of the combination of a PS agent (toluidine blue O -TBO) and an NP agent (silver nanoparticles - AgNPs) for the disinfection of the root canals inoculated with Enterococcus faecalis (E. faecalis). MATERIAL AND METHODS: In this study, concentrations of 20 ppm of TBO and 10 ppm of AgNPs, which showed the highest antibacterial activity against E. faecalis in the TBO/AgNPs combination, were used according to the preliminary studies. After instrumentation, 120 human, single-rooted, straight-canal mandibular premolars of a standard length of 13 mm were contaminated with bacteria, and experimental procedures were conducted against 21-day-old mature biofilm. The teeth were randomly divided into 5 main experimental groups: TBO/light; AgNPs; TBO/AgNPs; AgNPs/light; and TBO/AgNPs/light. Then, these main groups were divided into 2 subgroups each, according to the 2 application time periods (30 s and 60 s) (n = 10). The remaining 20 teeth constituted positive and negative control groups. The data was analyzed with the Kolmogorov-Smirnov test, one-way analysis of variance (ANOVA), Tukey's honestly significant difference (HSD) test, and the Bonferroni correction. RESULTS: The NaOCl group provided a bacterial reduction that was higher than in all other groups in a statistically significant manner. Light application on the TBO/AgNPs combination was the group that provided the highest bacterial reduction after NaOCl. CONCLUSIONS: The photoactivation of the TBO/AgNPs combination led to an increase in the effect of PDT, and it has the potential to be used as an adjunct for disinfection of the root canal system.


Subject(s)
Metal Nanoparticles , Photochemotherapy , Anti-Bacterial Agents/pharmacology , Dental Pulp Cavity , Humans , Root Canal Preparation , Silver/pharmacology , Sodium Hypochlorite
8.
J Clin Exp Dent ; 9(1): e34-e39, 2017 Jan.
Article in English | MEDLINE | ID: mdl-28149460

ABSTRACT

BACKGROUND: The aim of this study was to investigate the possible neurotoxic effects of 3 root canal sealers (RCSs) (AH Plus, GuttaFlow, iRoot SP) on cultured rat trigeminal ganglion (TG) neurons. MATERIAL AND METHODS: Primary cultures of TG neurons were obtained from 1 to 2-day old rats. Freshly mixed RCSs were incubated in sterile phosphate buffered saline and cells were incubated with supernatants of the RCSs for different time intervals (1-, 3-, 6- and 24-h; 1 or 1/10 diluted) and viability/cytotoxicity was tested by counting the number of live cells. Pair of dishes with cells from the same culture incubated with only culture medium was considered as negative controls. Cell images were captured and acquired at x200 magnification using a microscope equipped with a camera using special image program. The viable cells were manually counted assigned from the images for each dose and incubation duration. Data was analysed by using 1-way analysis of variance with Tukey post hoc tests. RESULTS: There was no significant change in cell viability after short duration of incubation (1- and 3-h) with the supernatant of any of RCSs, except for undiluted-AH Plus at 3-h. When AH Plus was compared with other RCSs, for diluted supernatants, there was only significant difference between iRoot SP and AH Plus at 24-h (P<0.05). Whereas undiluted-AH Plus was significantly more cytotoxic for 3-, 6- and 24-h periods as compared to respective incubation periods of undiluted other groups (P<0.05). GuttaFlow groups had similar neurotoxic effect on cells for all test periods. CONCLUSIONS: All tested RCSs exhibited a variable degree of neurotoxicity on these primary sensory neurons of orofacial tissues, depending on their chemical compositions. GuttaFlow and iRoot SP evoked a less toxic response to TG cells than AH Plus. Key words:Neurotoxicity, trigeminal ganglia, cell culture, root canal sealer, AH Plus, GuttaFlow, iRoot SP.

9.
Eur Endod J ; 2(1): 1-5, 2017.
Article in English | MEDLINE | ID: mdl-33403353

ABSTRACT

OBJECTIVE: This study used microcomputed tomography (micro-CT) to compare the volumes of voids and gaps in curved root canals instrumented and filled using various techniques. METHODS: Twenty extracted mandibular first molars with two curved mesial root canals were used. Root canals were instrumented using a self-adjusting file (SAF) or Revo-S file system. For standardization, mesiobuccal canals were instrumented with SAF and mesiolingual canals were instrumented with Revo-S in each root. The canals were divided into four experimental groups (n=10 in each). The canals were then filled via cold lateral compaction (CLC) or a thermoplasticized injectable technique (TT) using gutta-percha and AH Plus root canal sealer. The roots were scanned with a micro-CT, and the volumes of the voids and gaps were calculated using three-dimensional (3D) micro-CT images. Data were analyzed using unpaired t- and Kruskal-Wallis tests. A value of P<0.05 was considered significant. RESULTS: None of the tested techniques provided void- or gap-free fillings. Nevertheless, the SAF showed more gap formation than the Revo-S, and TT showed higher gap formation in all experimental groups. These differences, however, were not statistically significant (P>0.05). CONCLUSION: The SAF and Revo-S rotary file systems yielded comparable results. No statistically significant difference was found between the results of the various instrumentation and filling techniques.

10.
J Endod ; 42(8): 1279-85, 2016 Aug.
Article in English | MEDLINE | ID: mdl-27287613

ABSTRACT

INTRODUCTION: To evaluate the effectiveness of QMix solution (Dentsply Tulsa Dental Specialties, Tulsa, OK) on the smear layer using the following irrigation activation techniques: the EndoActivator (EA) system (Dentsply Tulsa Dental Specialties), photon-initiated photoacoustic streaming (PIPS), and an Er:YAG laser with an endodontic fiber tip. METHODS: Sixty-four extracted single-rooted human teeth were decoronated and the canals instrumented with ProTaper (Denstply Maillefer, Ballagues, Switzerland) up to size F4. The canals were irrigated with 5.25% sodium hypochlorite and a saline solution for 1 minute each. The specimens were then divided randomly into 4 experimental and 4 control groups (n = 8) according to the final irrigation activation technique. These groups included group 1, 2.5 mL QMix; group 2, QMix + EA; group 3, QMix + PIPS; and group 4: QMix + Er:YAG. Laser activated distilled water was used as control groups 5, 6, 7, and 8. Teeth were split longitudinally, and specimens were observed under a scanning electron microscope. Images were taken at the coronal, middle, and apical thirds of the teeth at a magnification of 1000× and were scored in the presence of the smear layer. Data were analyzed with Kruskal-Wallis and Mann-Whitney U tests. RESULTS: The highest scores were found in the apical third of all groups (P < .05). The QMix + Er:YAG group removed the smear layer more effectively than the nonactivated QMix group in the apical third (P < .05). The QMix + EA group removed the smear layer significantly in all thirds of the teeth when compared with the nonactivated QMix group (P < .05). The QMix + PIPS group showed a significantly better effect than the QMix group in the coronal third (P < .05). CONCLUSIONS: The EA and Er:YAG laser enhanced the smear layer removal ability of QMix in the apical thirds of the canals. QMix removed more smear layer in the coronal thirds when activated with the PIPS technique.


Subject(s)
Biguanides/pharmacology , Polymers/pharmacology , Root Canal Irrigants/pharmacology , Root Canal Preparation/methods , Smear Layer/prevention & control , Bicuspid , Dental Pulp Cavity/ultrastructure , Humans , In Vitro Techniques , Lasers, Solid-State , Materials Testing , Microscopy, Electron, Scanning , Photoacoustic Techniques
11.
Photomed Laser Surg ; 34(5): 205-10, 2016 May.
Article in English | MEDLINE | ID: mdl-27058651

ABSTRACT

OBJECTIVE: The aim of this study was to investigate the efficacy of an erbium chromium: yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser with different irrigation solutions [sodium hypochlorite (NaOCl), ethylenediaminetetraacetic acid (EDTA), QMix 2in1, and peracetic acid] in removing calcium hydroxide (CH) from artificial grooves created in root canals. BACKGROUND DATA: CH has to be removed totally before the root canal filling. Any CH residue on the dentin walls may affect the dentinal bond strength and the penetration of sealers into the dentin tubules, and may increase apical leakage. In addition, such a remnant could react chemically with sealers and, possibly, influence physical properties. Therefore, complete removal of CH placed inside the root canals is recommended, using various products and techniques. METHODS: The root canals of 160 extracted single-rooted mandibular premolars were prepared with ProTaper Universal rotary instruments up to size F4. The roots were split longitudinally along the length of the instrumented canals, and a standardized groove was prepared in the apical part of one segment. CH powder mixed with distilled water was placed into the grooves, and the root halves were then reassembled. The roots were randomly divided into two main groups according to the selected irrigation techniques (needle and laser activation) and then each main group was divided into four subgroups according to the final irrigation (NaOCl, EDTA, QMix 2in1, and peracetic acid) protocols used. After irrigation, the roots were disassembled and digital images were taken using a stereomicroscope. Measurements of residual CH were performed as percentages of the overall groove surface area with image analysis software. The data obtained were analyzed using one way analysis of variance and Tukey's honest significant difference tests. Statistical significance was set at p < 0.05. RESULTS: Significantly less residual CH was obtained in the laser-activated groups than in the needle-irrigated groups (p < 0.05). According to both main groups' data, NaOCl left significantly more CH than the other groups (p < 0.05). However, there was no significant difference among the EDTA, QMix 2in1, and peracetic acid groups. CONCLUSIONS: None of the techniques removed the CH dressing completely. Laser-activated irrigation was significantly more effective than needle irrigation.


Subject(s)
Edetic Acid/pharmacology , Lasers, Solid-State/therapeutic use , Root Canal Irrigants/pharmacology , Sodium Hypochlorite/pharmacology , Therapeutic Irrigation/instrumentation , Bicuspid , Dental Pulp Cavity , Humans , In Vitro Techniques , Surface Properties
12.
J Prosthodont ; 25(4): 324-9, 2016 Jun.
Article in English | MEDLINE | ID: mdl-25996406

ABSTRACT

PURPOSE: The purpose of this study was to evaluate the effects of various surface-treatment techniques for enhancing the bond strength between veneering ceramic and yttria-stabilized tetragonal zirconia polycrystals (Y-TZP). MATERIALS AND METHODS: Pre-sintered Y-TZP specimens were divided into eight groups (n = 10) according to the surface-treatment technique used: (a) untreated (control); (b) air abrasion with aluminum oxide particles; (c) erbium, chromium:yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser irradiation at different energy intensities (1 to 6 W). All specimens were then sintered and veneered with veneering ceramic according to the manufacturer's instructions. The obtained zirconia-ceramic specimens were immersed in 37°C distilled water for 24 hours before a shear bond strength test using a universal testing device at a 1 mm/min crosshead speed. The average values were calculated. After debonding, the Y-TZP surfaces were examined under a stereomicroscope to determine their fracture pattern, and the surface topography was evaluated with scanning electron microscopy after surface treatments. RESULTS: The bond strength ranged from 13.24 to 20.54 MPa. All surface treatments increased the bond strength between the veneering ceramic and Y-TZP; however, the value for the 6 W irradiation group was significantly different from the values for other groups (p ˂ 0.05). CONCLUSIONS: The present study's findings showed that higher energy densities were needed for the laser irradiation to improve the bond strength between the veneering ceramic and zirconia. CLINICAL IMPLICATION: Y-TZP is commonly used as a core material in fixed restorations. The bond strength between zirconia and the veneering ceramic can be affected by various surface treatments.


Subject(s)
Dental Porcelain , Dental Veneers , Ceramics , Dental Bonding , Humans , Materials Testing , Microscopy, Electron, Scanning , Shear Strength , Surface Properties , Yttrium , Zirconium
13.
J Istanb Univ Fac Dent ; 50(2): 31-37, 2016.
Article in English | MEDLINE | ID: mdl-28955563

ABSTRACT

PURPOSE: The aim of this study was to evaluate the amount of apically extruded debris during endodontic retreatment with different file systems. MATERIALS AND METHODS: Sixty extracted human mandibular premolar teeth were used in this study. Root canals of the teeth were instrumented and filled before being randomly assigned to three groups. Guttapercha was removed using the Reciproc system, the Twisted File system (TF), and Hedström-files (H-file). Apically extruded debris was collected and dried in pre-weighed Eppendorf tubes. The amount of extruded debris was assessed with an electronic balance. Data were statistically analyzed using one-way ANOVA, Kruskal-Wallis, and Mann-Whitney U tests. RESULTS: The Reciproc and TF systems extruded significantly less debris than the H-file (p<0.05). However, no significant difference was found between the Reciproc and TF systems. CONCLUSION: All tested file systems caused apical extrusion of debris. Both the rotary file (TF) and the reciprocating single-file (Reciproc) systems were associated with less apical extrusion compared with the H-file.

14.
Eur J Dent ; 9(3): 423-427, 2015.
Article in English | MEDLINE | ID: mdl-26430374

ABSTRACT

OBJECTIVE: The aim of this study was to evaluate the tissue dissolution efficacy of four root canal irrigation solutions (sodium hypochlorite [NaOCl], chlorhexidine gluconate [CHX], Octenidine [OCT], and QMix 2in1) on bovine pulp tissue. MATERIALS AND METHODS: Fifty bovine pulp tissue samples, each weighing 6.55 mg, were prepared and randomly divided into four experimental groups and one control group (n = 10) according to the dissolution irrigants used: (1) 5.25% NaOCl group; (2) 2% CHX group; (3) OCT group; (4) QMix 2in1 group; and (5) control group (saline solution). These samples were then placed into special bovine dentin reservoir models and immersed for 1 h with each test solution (0.1 mL of each) at room temperature. The pulp samples were then blotted dry and weighed again. The percentage of weight loss was calculated. Statistically analyzed with one-way analysis of variance and post-hoc Tukey tests (P = 0.05). RESULTS: Saline solution did not dissolve the bovine pulp tissue. All groups, except OCT, dissolved pulp samples more effectively than the control group (P < 0.05). The highest tissue dissolution was observed in 5.25% NaOCl group (P < 0.05). No statistically significant difference was found between the tissue-dissolving effect between QMix 2in1 and those of 2% CHX. CONCLUSIONS: Within the limitations of this in vitro study, NaOCl exhibited the best tissue-dissolving effect out of all solutions tested. CHX and QMix 2in1 were able to dissolve pulp tissue but less than NaOCl. OCT and saline solutions could not exhibit significantly tissue-dissolving effectiveness. This study shown that QMix 2in1 has little capacity to dissolve pulp tissue therefore used alone is not sufficient for this purpose.

15.
Photomed Laser Surg ; 33(7): 384-9, 2015 Jul.
Article in English | MEDLINE | ID: mdl-26154727

ABSTRACT

OBJECTIVE: The aim of this study was to evaluate apical extrusion of debris in canals prepared with three nickel-titanium (NiTi) rotary file systems [Twisted File Adaptive (TFA), SybronEndo, Orange, CA], Reciproc [(RP), VDW, Munich, Germany], and Revo-S [(RS), MicroMega, Besançon, France] and two irrigation [conventional needle (CNI) and laser-activated (LAI)] techniques. BACKGROUND DATA: Although previous studies have evaluated the amount of apically extruded debris by various instrumentation and irrigation methods, none of them have investigated the effect of LAI during the root canal preparation on debris extrusion. METHODS: Ninety extracted single-rooted human mandibular premolars with straight canals were randomly assigned to six groups (n=15) according to the file and irrigation protocols used: (1) TFA and LAI group, (2) RP and LAI group, (3) RS and LAI group, (4) TFA and CNI group, (5) RP and CNI group, and (6) RS and CNI group. Debris extruded from the apical foramen during root canal preparation was collected into preweighed Eppendorf tubes. The weight of the dry extruded debris was established by subtracting the preinstrumentation and postinstrumentation weight of the Eppendorf tubes for each group. Data were analyzed using the Kruskal Wallis and Mann Whitney U tests with Bonferroni correction to compare groups. RESULTS: LAI groups extruded more debris than CNI groups (p<0.05). However, no statistically significant differences were observed among the file groups when each irrigation method was evaluated separately (p>0.017). CONCLUSIONS: Within the limitations of this study, it can be concluded that the agitation method, such as LAI, had a significant effect on the amount of extrusion.


Subject(s)
Lasers, Solid-State , Low-Level Light Therapy , Root Canal Irrigants/pharmacology , Root Canal Preparation , Tooth Apex/drug effects , Tooth Apex/radiation effects , Humans , Tissue Culture Techniques
16.
Clin Oral Investig ; 19(8): 2091-100, 2015 Nov.
Article in English | MEDLINE | ID: mdl-25773448

ABSTRACT

OBJECTIVES: The aim of this study was to compare the neurotoxicity of various root canal sealers on rat sciatic nerve by electrophysiologic and histopathologic analyses. MATERIALS AND METHODS: A total of 40 male rats were randomly divided into five groups: Control, AH Plus, GuttaFlow, Sealapex and Smartpastebio. Sciatic nerves of the rats were uncovered using the surgical procedures, and the prepared sealers were then applied on nerves with a polyethylene tube vehicle for 15 days. Nerve potentials were recorded at initial exposure, 5, 30 and 120 min (early phase), and 15 days (late phase) by an electrophysiologic analysis system for all groups. The obtained measurements were then used to calculate the nerve conduction velocities (NCV). Subsequently, all rats were sacrificed, and their sciatic nerves were removed for histopathologic analysis. Statistical analysis was performed using the Kruskal-Wallis and Mann-Whitney U tests for intergroup variables and the Friedman and Wilcoxon test for intragroup variables. Statistical significance was set at P < 0.05. RESULTS: There was no significant difference between early and late phase results in the control group. This group showed little or no lasting damage to nerve tissue. All sealers decreased the NCV in the early phase time periods, but this decrease was only statistically significant in the AH Plus group at 120-min time period (P < 0.0125). During the late phase, the AH Plus and GuttaFlow groups almost reached initial NCV values, and it was lower than the initial values in the Sealapex and Smartpastebio groups. However, this decrease was not statistically significant. When intergroup comparisons were performed, statistically significant differences occurred at 30 min in the Sealapex group and 120 min in the AH Plus group compared with the control group (P < 0.0125). All sealers induced neurotoxicity as a result of degenerative and inflammatory responses of nerve tissue in histologic analysis. Histologic analysis revealed Sealapex and GuttaFlow to be the most and least neurotoxic, respectively. CONCLUSIONS: All tested root canal sealers exhibited a variable degree of neurotoxicity depending on their chemical compositions. CLINICAL RELEVANCE: Apical extrusion of endodontic filling materials may cause undesired consequences, such as inflammation and severe neurotoxic damage; therefore, extrusion factor plays an important role during the root canal treatment.


Subject(s)
Dental Pulp Cavity/innervation , Dental Pulp Cavity/physiopathology , Electrophysiological Phenomena/drug effects , Neurotoxicity Syndromes/physiopathology , Root Canal Filling Materials/adverse effects , Sciatic Nerve/physiopathology , Animals , Dental Pulp Cavity/pathology , Male , Neurotoxicity Syndromes/pathology , Rats , Rats, Sprague-Dawley , Root Canal Filling Materials/pharmacology , Sciatic Nerve/pathology
17.
Photomed Laser Surg ; 33(1): 15-21, 2015 Jan.
Article in English | MEDLINE | ID: mdl-25555090

ABSTRACT

OBJECTIVE: The aim of this study was to evaluate surface roughness (SR) and the influence of various surface treatments (STs) on the veneer ceramic shear bond strength (SBS) to Y-TZP zirconia. BACKGROUND DATA: STs can improve the bonding properties of zirconia ceramics. However, little is known about the effect of Er,Cr:YSGG laser irradiation on SBS between zirconia and veneer ceramic/resin cement. METHODS: Eighty ceramic discs of yttria-tetragonal zirconia polycrystals (Y-TZP) were prepared, and specimens were divided into eight groups (n=10): untreated (control), air abrasion, and Er,Cr:YSGG laser irradiation with different energy intensities (1-6 W). Average SR of each specimen was determined with a profilometer, and a veneering ceramic recommended for zirconia was fired into cylinder-shaped Y-TZP specimens. SBS test was performed for each specimen at a crosshead speed of 1 mm/min, and the average means of SBS and SR were calculated. Fracture modes and the surface topography were evaluated with various microscopes after STs. Data were analyzed by using one way analysis of variance (ANOVA) and Tukey honest significant difference (HSD) tests. RESULTS: The highest mean force value was observed in the air abrasion group, and followed by 6 and 5 W laser irradiations, respectively. The difference between control and air abrasion groups was found to be statistically significant (p<0.05). All laser irradiations increased the SBS value, but 1 and 2 W laser irradiations showed no statistically significant differences compared with the control group. However, the SR value for air abrasion group was significantly higher than that of the control group and 1 W (p<0.05), and there were no significant differences between the SR of all the laser groups and the control group. CONCLUSIONS: The result of this study showed that STs with air abrasion and high laser energy intensities (3-6W), can improve the bonding properties of Y-TZP zirconia.


Subject(s)
Air Abrasion, Dental , Ceramics/chemistry , Dental Bonding , Lasers, Solid-State , Resin Cements/chemistry , Yttrium/chemistry , Zirconium/chemistry , Materials Testing , Microscopy, Atomic Force , Microscopy, Electron, Scanning , Shear Strength , Surface Properties
18.
Acta Odontol Scand ; 73(5): 380-6, 2015 Jul.
Article in English | MEDLINE | ID: mdl-25330165

ABSTRACT

OBJECTIVE: Intra-canal post systems are commonly used to restore root-filled teeth. Bond strengths of the posts can be affected by various surface treatments of the post or the dentin. The aim of this study was to evaluate the effects of dentin surface treatments including erbium-chromium; yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser irradiation with different intensities on the push-out bond strength of the glass fiber posts to root dentin. MATERIALS AND METHODS: Forty single-rooted human maxillary incisors were filled and post spaces were prepared. After these procedures, the specimens were divided randomly into four groups according to the dentin surface treatments, as follows: (i) untreated surface (control), (ii) 1W Er,Cr:YSGG laser application, (iii) 2W Er,Cr:YSGG laser application and (iv) 3W Er,Cr:YSGG laser application. Then the posts were cemented into the root canals using dual-cured resin cement. Bonded specimens were cut into 1-mm-thick slices and push-out tests were performed using a universal testing device. All specimens were loaded until fracture and the failure modes were evaluated with a stereomicroscope at 32× magnification. Representative specimens were analyzed by scanning electron microscopy. Data were analyzed using a one-way ANOVA, Tukey and Wilcoxon tests. RESULTS: The bond strength values ranged from 3.22-4.68 MPa. There were no statistically significant differences among the groups, regardless of the different levels. The coronal and middle levels of the post space had significantly higher bond strength values compared with the apical level (p < 0.05). CONCLUSION: Er,Cr:YSGG laser irradiation with different intensities did not increase the bond strength of the fiber posts to the root canal dentin walls.


Subject(s)
Dental Bonding , Dental Etching/methods , Dental Pulp Cavity/radiation effects , Dentin/radiation effects , Glass/chemistry , Lasers, Solid-State , Post and Core Technique/instrumentation , Composite Resins/chemistry , Dental Pulp Cavity/ultrastructure , Dental Stress Analysis/instrumentation , Dentin/ultrastructure , Humans , Materials Testing , Methacrylates/chemistry , Microscopy, Electron, Scanning , Radiation Dosage , Random Allocation , Resin Cements/chemistry , Root Canal Preparation/instrumentation , Root Canal Preparation/methods , Self-Curing of Dental Resins/methods , Stress, Mechanical , Surface Properties , Time Factors
19.
Scanning ; 37(2): 89-94, 2015.
Article in English | MEDLINE | ID: mdl-25488400

ABSTRACT

Debonding at the composite-adhesive interface is a major problem for indirect composite restorations. The aim of this study was to evaluate the bond strength (BS) of an indirect composite resin after various surface treatments (air-abrasion with Al2O3, phosphoric acid-etchig and different applications of NdYAG laser irradiations). Fifty composite disks were subjected to secondary curing to complete polymerization and randomly divided into five experimental groups (n = 10) including Group 1, untreated (control); Group 2, phosphoric acid-etched; Group 3, air-abrasion with Al2 O3 ; Group 4, Nd:YAG laser irradiated with non-contact and Group 5, Nd:YAG laser irradiated with contact. They were then bonded to resin cement and shear BS was determined in a universal testing device at a crosshead speed of 1 mm/min. One way analysis of variance (ANOVA) and Tukey post-hoc tests were used to analyze the BS values. The highest BS value was observed in Group 4 and followed by Group 3. Tukey test showed that there was no statistical difference between Group1, 2 and 5. Furthermore, differences in BSs between Group 4 and the other groups except Group 3 were significant (p < 0.05) and also there were significant differences in BSs between Group 3 to 1 and Group 3 to 2 (p < 0.05). This study reveals that air-abrasion with Al2 O3 and Nd:YAG laser irradiation with non-contact provided a significant increase in BS between indirect composite and resin cement.


Subject(s)
Chemical Phenomena , Composite Resins/chemistry , Dental Etching/methods , Resin Cements/chemistry , Surface Properties , Biostatistics , Humans
20.
ScientificWorldJournal ; 2014: 836513, 2014.
Article in English | MEDLINE | ID: mdl-25114976

ABSTRACT

The aim of this study was to compare the efficacy of D-RaCe files and a self-adjusting file (SAF) system in removing filling material from curved root canals instrumented and filled with different techniques by using microcomputed tomography (micro-CT). The mesial roots of 20 extracted mandibular first molars were used. Root canals (mesiobuccal and mesiolingual) were instrumented with SAF or Revo-S. The canals were then filled with gutta-percha and AH Plus sealer using cold lateral compaction or thermoplasticized injectable techniques. The root fillings were first removed with D-RaCe (Step 1), followed by Step 2, in which a SAF system was used to remove the residual fillings in all groups. Micro-CT scans were used to measure the volume of residual filling after root canal filling, reinstrumentation with D-RaCe (Step 1), and reinstrumentation with SAF (Step 2). Data were analyzed using Wilcoxon and Kruskal-Wallis tests. There were no statistically significant differences between filling techniques in the canals instrumented with SAF (P = 0.292) and Revo-S (P = 0.306). The amount of remaining filling material was similar in all groups (P = 0.363); all of the instrumentation techniques left filling residue inside the canals. However, the additional use of SAF was more effective than using D-RaCe alone.


Subject(s)
Dental Restoration, Permanent , Root Canal Filling Materials , Root Canal Therapy , Dental Instruments , Humans
SELECTION OF CITATIONS
SEARCH DETAIL
...