Biocompatible Janus microparticle synthesis in a microfluidic device.

Janus particles are popular in recent years due to their anisotropic physical and chemical properties. Even though there are several established synthesis methods for Janus particles, microfluidics-based methods are convenient and reliable due to low reagent consumption, monodispersity of the resultant particles and efficient control over reaction conditions. In this work a simple droplet-based microfluidic technique is utilized to synthesize magnetically anisotropic TiO2-Fe2O3 Janus microparticles. Two droplets containing reagents for Janus particle were merged by using an asymmetric device such that the resulting droplet contained the constituents within its two hemispheres distinct from each other. The synthesized Janus particles were observed under the optical microscope and the scanning electron microscope. Moreover, a detailed in vitro characterization of these particles was completed, and it was shown that these particles have a potential use for biomedical applications.

Biosensor for ATP detection via aptamer-modified PDA@POSS nanoparticles synthesized in a microfluidic reactor.

This study introduces aptamer-functionalized polyhedral oligomeric silsesquioxane (POSS) nanoparticles for adenosine triphosphate (ATP) detection where the POSS nanoparticles were synthesized in a one-step, continuous flow microfluidic reactor utilizing thermal polymerization. A microemulsion containing POSS monomers was generated in the microfluidic reactor which was designed to prevent clogging by using a continuous oil flow around the emulsion during thermal polymerization. Surfaces of POSS nanoparticles were biomimetically modified by polydopamine. The aptamer sequence for ATP was successfully attached to POSS nanoparticles. The aptamer-modified POSS nanoparticles were tested for affinity-based biosensor applications using ATP as a model molecule. The nanoparticles were able to capture ATP molecules successfully with an affinity constant of 46.5 [Formula: see text]M. Based on this result, it was shown, for the first time, that microfluidic synthesis of POSS nanoparticles can be utilized in designing aptamer-functionalized nanosystems for biosensor applications. The integration of POSS in biosensing technologies not only exemplifies the versatility and efficacy of these nanoparticles but also marks a significant contribution to the field of biorecognition and sample preparation.

Synthesis of Anisotropic Magnetic Polymeric Janus Particles by In Situ Separation of Magnetic Nanoparticles in a Microfluidic Device.

Magnetic Janus particles have been studied extensively for medical and biological applications owing to their controllable mobility in fluid media. In this work, we report a novel microfluidic device designed for the synthesis of magnetically anisotropic Janus particles made of poly(ethylene glycol) diacrylate and embedded with magnetic iron oxide nanoparticles. Our method consists of a droplet generation step followed by magnetic separation using an external magnetic field and ultraviolet polymerization. The synthesized particles exhibit a monodisperse size distribution with a standard deviation of less than 3.5%, which is among the best size distributions obtained in the literature for magnetic Janus particles. The anisotropic magnetic property of the particles enable them to rotate about their own axes in the presence of an external magnetic field, introducing another degree of freedom to their motion. This microfluidic technique is simple, one-step, and versatile, offering control over the size distribution to synthesize magnetically anisotropic Janus particles.

Antibacterial properties and osteoblast interactions of microfluidically synthesized chitosan - SPION composite nanoparticles.

In this research, a multi-step microfluidic reactor was used to fabricate chitosan - superparamagnetic iron oxide composite nanoparticles (Ch - SPIONs), where composite formation using chitosan was aimed to provide antibacterial property and nanoparticle stability for magnetic resonance imaging (MRI). Monodispersed Ch - SPIONs had an average particle size of 8.8 ± 1.2 nm with a magnetization value of 32.0 emu/g. Ch - SPIONs could be used as an MRI contrast agent by shortening T2 relaxation parameter of the surrounding environment, as measured on a 3 T MRI scanner. In addition, Ch - SPIONs with concentrations less than 1 g/L promoted bone cell (osteoblast) viability up to 7 days of culture in vitro in the presence of 0.4 T external static magnetic field. These nanoparticles were also tested against Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa), which are dangerous pathogens that cause infection in tissues and biomedical devices. Upon interaction of Ch - SPIONs with S. aureus and P. aeruginosa at 0.01 g/L concentration, nearly a 2-fold reduction in the number of colonies was observed for both bacteria strains at 48 h of culture. Results cumulatively showed that Ch - SPIONs were potential candidates as a cytocompatible and antibacterial agent that can be targeted to biofilm and imaged using an MRI.

Microfluidic Methods in Janus Particle Synthesis.

Janus particles have been at the center of attention over the years due to their asymmetric nature that makes them superior in many ways to conventional monophase particles. Several techniques have been reported for the synthesis of Janus particles; however, microfluidic-based techniques are by far the most popular due to their versatility, rapid prototyping, low reagent consumption and superior control over reaction conditions. In this review, we will go through microfluidic-based Janus particle synthesis techniques and highlight how recent advances have led to complex functionalities being imparted to the Janus particles.

Describing Droplet Motion on Surface-Textured Ratchet Tracks with an Inverted Double Pendulum Model.

We describe the motion of a droplet on a textured ratchet track using a nonlinear resonator model. A textured ratchet track is composed of a semicircular pillar array that induces a net surface tension local gradient on a droplet placed on it. When a vertical vibration is applied, hysteresis is overcome, and the droplet moves toward the local lower energy barrier; however, due to the repetitive structure of texture, it keeps moving until the end of the track. The droplet motion depends on the amplitude and frequency of the vertical oscillation, and this dependence is nonlinear. Therefore, finding a fully analytic solution to represent this motion is not trivial. Consequently, the droplet motion remains poorly understood. In this study, we elaborate on the utility of a double pendulum as a basis for modeling the droplet motion on surfaces inducing asymmetric force. Similar to the droplet motion, resonators, such as a double pendulum, are simple, yet nonlinear systems. Moreover, an inverted double pendulum motion has key characteristics such as the two-phase motion and the double peak motion, which are also observed in the droplet motion. We use various data-processing methods to highlight the similarity between these two systems both qualitatively and quantitatively. After establishing this comparison, we propose a model that utilizes an inverted double pendulum mounted on a moving cart to successfully simulate the motion of a droplet on a ratchet track. This methodology will lead to the development of an accurate droplet-motion modeling approach, and we believe that it will be useful to understand droplet dynamics more deeply.

Textured surfaces as a new platform for nanoparticle synthesis.

We present a new, surface-based microfluidic platform for the synthesis of nanoparticles. In this platform chemical reagents are carried in separate droplets, then mixed and later transported to a desired location on the surface using surface textured ratchet tracks. This brings the advantages of both synthesizing and transporting nanoparticles in situ without having cross-contamination between samples and addressing each sample independently. This platform is also capable of carrying multiple synthesis reactions concurrently.

Alternating Droplet Formation by using Tapered Channel Geometry.

The ability to produce a controlled sequence of alternating droplets from two separate sources inside a microfluidic system brings several advantages in microfluidic analysis. The effectiveness of this technique for use in an application depends on the ability of the device to replicate the pattern continuously and accurately. In this work we studied the effect of the dispersed phase channel geometry on generating a repeating pattern of alternating droplets in a cross junction microfluidic device. By measuring the radius of curvature of a droplet at the time of break up, and calculating the Laplace pressure using these values, we analyzed how the angle of taper of the dispersed phase inlet channel has an influence on the pattern repetition and uniformity of formed droplet size and spacing in between. The performance of devices with different angle of taper values were studied experimentally. This comparative study indicated that the ability of a cross junction device to generate alternating droplets with uniform size and spacing is highly dependent on the angle of taper of the inlet channels; and it improves with larger taper angles.

Multi-temperature zone, droplet-based microreactor for increased temperature control in nanoparticle synthesis.

Microreactors are an emerging technology for the controlled synthesis of nanoparticles. The Multi-Temperature zone Microreactor (MTM) described in this work utilizes thermally isolated heated and cooled regions for the purpose of separating nucleation and growth processes as well as to provide a platform for a systematic study on the effect of reaction conditions on nanoparticle synthesis.

Controlling liquid drops with texture ratchets.

Controlled vibration selectively propels multiple microliter-sized drops along microstructured tracks, leading to simple microfluidic systems that rectify oscillations of the three-phase contact line into asymmetric pinning forces that propel each drop in the direction of higher pinning.