Ethosomal (-)-epigallocatechin-3-gallate as a novel approach to enhance antioxidant, anti-collagenase and anti-elastase effects.

Controlled release systems containing natural compounds have been successfully applied in cosmetics as antiaging products to enhance the penetration of active compounds through the skin. In this study, we aimed to develop novel ethosomal formulations containing a potent antioxidant, epigallocatechin-3-gallate (EGCG), and to evaluate their potential for use in cosmetics by determining their antioxidant and antiaging effects. Ethosomes (ETHs) were prepared via mechanical dispersion and characterized in vitro in terms of particle size (PS), zeta potential (ZP), polydispersity index (PDI), encapsulation efficiency percentage (EE%), and in vitro release. The best ETH formulation was used to prepare the ethosome-based gel (ETHG) by using Carbopol 980 as a gelling agent at a ratio of 1:1 (v/v). The gel formulation was evaluated regarding organoleptic properties, pH values, and viscosity. Stability studies were conducted for three months and changes in characterization parameters and residual EGCG content of ETHs were examined. Besides, for ETHG, organoleptic properties, pH values (every two weeks), and viscosity (first and twelfth week) were determined for three months. The 3-(4,5-dimethyldiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay was used to test the cytotoxicity of the formulations and different EGCG solutions on the L929 cell line. The cell permeation properties and inhibitory effects of ETHs and ETHGs on collagenase and elastase enzymes were investigated compared to those of the solution form. Within the scope of antioxidant activity studies, 2,2-diphenyl-1-picrylhydrazyl (DPPH•) and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS+•) radical scavenging and ß-carotene/linoleic acid co-oxidation inhibitory effects were carried out. The optimized EGCG-loaded ETHs (F3) were within the nanoscale range (238 ± 1.10 nm). The highest encapsulation efficiency and in vitro release values were 51.7 ± 1.15% and 50.8 ± 1.70%, respectively. The ETHG was successfully formulated with F3-coded ETHs and the cytotoxicity test revealed that the formulations and the EGCG solution at different concentrations were nontoxic. In terms of cell permeability, enzyme inhibition, and antioxidant activity, the ethosomal formulations yielded better results compared to the EGCG solution. It was observed that the formulations had a long-term effect due to the stability of EGCG. The findings of the study underline the potential of antioxidant and antiaging effects of the developed ethosomal formulations for use in the cosmetic field.

Effects of drug concentration and PLGA addition on the properties of electrospun ampicillin trihydrate-loaded PLA nanofibers.

The aim of this study was to produce ampicillin trihydrate-loaded poly(lactic acid) (PLA) and PLA/poly(lactic-co-glycolic acid) (PLA/PLGA) polymeric nanofibers via electrospinning using 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) as the solvent for local application in tissue engineering. The effects of ampicillin trihydrate concentration (4-12%) and addition of PLGA (20-80%) on the spinnability of the solutions, morphology, average nanofiber diameter, encapsulation efficiency, drug release, and mechanical properties of PLA and PLA/PLGA nanofibers were examined. All nanofibers were bead-free and uniform. They had favorable encapsulation efficiency (approx. 90%) and mechanical properties. The increase in the amount of ampicillin trihydrate caused an increase in the diameter and burst effect of the nanofibers. The drug release ended on the 7th and 3rd day with nanofibers containing 4% and 12% of drug, respectively. The prolonged and controlled drug release for ten days was obtained with nanofibers containing 8% of drug. Thus, the ideal drug concentration was determined to be 8%. Nanofibers containing PLA/PLGA had a larger diameter than those including PLA. In addition, both the strength and elongation of nanofibers decreased depending on the increase in nanofiber size with the addition of PLGA, increased amount of drug, and ratios of PLGA. Drug release studies showed that PLA/PLGA nanofibers exhibited a lower burst effect and a decrease in drug release when compared to PLA nanofibers. Finally, PLA/PLGA nanofibers can be produced with enhanced encapsulation efficiency and mechanical properties, resulting in controlled and tailored release of ampicillin trihydrate for at least ten days. In conclusion, it was demonstrated that the addition of PLGA in different ratios and the amount of drug can be manipulated to obtain the desired properties (average nanofiber diameter, morphology, in vitro drug release, and mechanical properties) of PLA nanofibers.

Electrospinning of linezolid loaded PLGA nanofibers: effect of solvents on its spinnability, drug delivery, mechanical properties, and antibacterial activities.

Objective: The choice of a desirable solvent/solvent system is fundamental for optimization of electrospinning by altering the rheological and electrostatic properties of the polymer solutions.Methods: The effects of the solvents and their properties on the viscosity and spinnability of the polymer solutions and the diameter, morphology, in vitro drug release, drug release mechanisms, antibacterial activity against methicillin-resistant Staphylococcus aureus (MRSA) and mechanical properties of electrospun poly-(d,l-lactide-co-glycolide) (PLGA) nanofibers were investigated. Dichloromethane (DCM), dimethylformamide (DMF), various ratios of DCM:DMF, and 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) were used as solvents.Results: Although solutions containing DCM/DMF alone were not spinnable, different ratios of DCM:DMF and HFIP were determined as suitable solvents to produce nanofibers because of high enough conductivity, viscosity, and low enough surface tension of the solutions. The DCM:DMF ratio was highly effective on viscosity, nanofiber diameter, morphology, and linezolid release rate. The viscosity of HFIP containing solution was higher and the obtained nanofibers were thicker and smoother with better mechanical properties. The release of nanofibers containing HFIP at a concentration of 10% w/v PLGA was more prolonged than nanofibers containing DCM:DMF mixture. The effect of linezolid content on nanofibers was also investigated. As the amount of linezolid increased, nanofiber diameter and drug release increased and bead formation was observed. While antibacterial activity with nanofibers for which DCM:DMF was used, lasted for 13 days, it was extended to 16 days in nanofibers for which HFIP was used.Conclusions: Type and ratio of the solvent system affected viscosity and spinnability of the solutions, the average nanofiber diameter, morphology, in vitro activity and mechanical properties of the obtained electrospun nanofibers.

In vitro and in vivo evaluation of linezolid loaded electrospun PLGA and PLGA/PCL fiber mats for prophylaxis and treatment of MRSA induced prosthetic infections.

In this study, it was aimed to formulate linezolid loaded electrospun PLGA and PCL fiber mats doing controlled drug release, to be used in the treatment and prophylaxis of the prosthesis related infections. The effect of PLGA concentration, PLGA to PCL ratio and the amount of linezolid on the fiber and mat properties were examined. Fiber diameter has been shown to increase with increasing amount of PLGA and linezolid. Increase in PLGA amount resulted in reduced linezolid release, whereas increase in linezolid amount resulted in increased drug release. All PLGA fiber mats have shown to have favorable encapsulation efficiency (≥73%) and mechanical properties. Encapsulation efficiency and the mechanical properties deteriorated with the addition of PCL to the formulations. PLGA fiber mats have shown a biphasic controlled release and in vitro antibacterial activity against methicillin-resistant Staphylococcus aureus (MRSA), pattern up to one month. The formulation selected as the optimum has been evaluated in vivo on the infected rats, which had prosthetic implantation after bone fracture. Consequently, it has been demonstrated microbiologically and histopathologically that a more efficient therapy and prophylaxis have been achieved with a 37-fold lower dose of linezolid.