The effect of thermomechanical welding on the microstructure and mechanical properties of S700MC steel welds.

Grain refinement by plastic deformation during conventional TIG welding can help to compensate for the loss of mechanical properties of welded joints. The thermomechanical welding (TMW) tests were performed on S700MC steel with different combinations of TIG arc energy and high frequency hammering over three target cooling times (t8/5 = 5s, 15s, and 25s). Additionally, the effect of initial microstructures on the weld joint quality was analysed by testing three materials conditions: hot-rolled (as-received) and cold-rolled with 10% and 30% thickness reductions, respectively. The effects of plastic deformation and the mechanical vibration on the grain refinement were studied separately. Optical microscopy, electron backscattered diffraction, and Vickers hardness were used to characterise the weld microstructure heterogeneity. The weld width and depth and the mean grain size were correlated as the function of cooling time t8/5. The results show that the weld dimensions increase with increasing the t8/5. The weld microstructures transformed from the mixed martensite and bainite into mixed ferrite and bainite with increasing the t8/5 time, and the related mean grain size increased gradually. The TMW welds exhibit smaller grains compared to TIG welds due to the coupled effects of mechanical vibration and plastic deformation. The mechanical vibration contributes to weld metal homogenisation, accelerating TiN precipitation in the fusion zone. The proposed TMW process can refine the weld microstructure of S700MC steel, enhancing its mechanical properties.

Few-Cycle Surface Plasmon Polaritons.

Surface plasmon polaritons (SPPs) can confine and guide light in nanometer volumes and are ideal tools for achieving electric field enhancement and the construction of nanophotonic circuitry. The realization of the highest field strengths and fastest switching requires confinement also in the temporal domain. Here, we demonstrate a tapered plasmonic waveguide with an optimized grating structure that supports few-cycle surface plasmon polaritons with >70 THz bandwidth while achieving >50% light-field-to-plasmon coupling efficiency. This enables us to observe the─to our knowledge─shortest reported SPP wavepackets. Using time-resolved photoelectron microscopy with suboptical-wavelength spatial and sub-10 fs temporal resolution, we provide full spatiotemporal imaging of co- and counter-propagating few-cycle SPP wavepackets along tapered plasmonic waveguides. By comparing their propagation, we track the evolution of the laser-plasmon phase, which can be controlled via the coupling conditions.

Methylated Septin9 identified patients with colorectal carcinoma and showed higher sensitivity than conventional biomarkers in detecting tumor.

INTRODUCTION: It is worth noting the limitations in sensitivity of the existing biomarkers carcinoembryonic antigen (CEA) and carbohydrate antigen (CA 19-9) in detection of colorectal cancer (CRC). In our study, we address the performance of the liquid biopsy biomarker "methylated septin 9" (mSEPT9) in the detection and disease surveillance of CRC. MATERIALS AND METHODS: The monocentric prospective survey encompassed 120 patients diagnosed with CRC who underwent planned curative resection between December 2018 and December 2020. Blood samples were collected from the participants preoperatively as well as at 7 days, 6 weeks, and 3 months postoperatively. The presence of mSEPT9, CEA, and CA 19-9 was detected using the pro Epi Colon® 2.0 CE test, Elecsys® CEA, and Elecsys® CA19-9 electrochemiluminescence immunoassay, respectively. RESULTS: In the preoperative setting, mSEPT9 demonstrated superior capability in identifying patients with CRC compared to CEA and CA 19-9, with detection rates of 57%, 32%, and 18% respectively. Combining all three biomarkers increased the overall sensitivity to 66% preoperatively. In considering UICC stage and T-status, mSEPT9 exhibited higher sensitivity across all stages in comparison with conventional tumor markers, and 65% of patients with metastases were identified postoperatively through mSEPT9. Tumor recognition after surgery was achieved with the sensitivity of 72% and specificity of 91%. CONCLUSIONS: We recommend using mSEPT9 as a non-invasive diagnostic tool for the ongoing monitoring of patients with CRC. The sensitivity and specificity exhibited by mSEPT9 in recognition of tumor after surgery, highlights its particular potential for monitoring of CRC patients.

Evaluation of an inducible knockout system in insect cells based on co-infection and CRISPR/Cas9.

Due to comparably high product titers and low production costs, the baculovirus/insect cell expression system is considered a versatile production platform in the biopharmaceutical industry. Its excellence in producing complex multimeric protein assemblies, including virus-like particles (VLPs), which are considered promising vaccine candidates to counter emerging viral threats, made the system even more attractive. However, the co-formation of budded baculovirus during VLP production poses a severe challenge to downstream processing. In order to reduce the amount of budded baculovirus in the expression supernatant we developed an inducible knockout system based on CRISPR/Cas9 and co-infection with two baculoviral vectors: one bringing along the Cas9 nuclease and the other one having incorporated the sequence for sgRNA expression. With our set-up high titer viruses can be generated separately, as only when both viruses infect cells simultaneously a knockout can occur. When budding essential genes gp64 and vp80 were targeted for knockout, we measured a reduction in baculovirus titer by over 90%. However, as a consequence, we also determined lower overall eYFP fluorescence intensity showing reduced recombinant protein production, indicating that further improvements in engineering as well as purification are required in order to ultimately minimize costs and timeframes for vaccine production utilizing the baculovirus/insect cell expression system.

Nanostructured supramolecular networks from self-assembled diamondoid molecules under ultracold conditions.

Diamondoid molecules and their derivatives have attracted attention as fascinating building blocks for advanced functional materials. Depending on the balance between hydrogen bonds and London dispersion interactions, they can self-organize in different cluster structures with functional groups tailored for various applications. Here, we present a new approach to supramolecular aggregation where self-assembly of diamondoid acids and alcohols in the ultracold environment of superfluid helium nanodroplets (HNDs) was analyzed by a combination of time-of-flight mass spectrometry and computational tools. Experimentally observed magic numbers of the assembled cluster sizes were successfully identified and computed cluster structures gave valuable insights into a different conglomeration mode when compared to previously explored less-polar diamondoid derivatives. We have confirmed that functional groups acting as good hydrogen bond donors completely take over the self-organization process, resulting in fascinating pair-wise or cyclic supramolecular assemblies. Particularly noteworthy is that mono- and bis-substituted diamondoid derivatives of both series engage in completely different modes of action, which is reflected in differing non-covalent cluster geometries. Additionally, formed cyclic clusters with a polar cavity in the center and a non-polar diamondoid outer layer can be of high interest in porous material design and provide insights into the structural requirements needed to produce bulk materials with desired properties.

Diamondoid ether clusters in helium nanodroplets.

Diamondoid ethers were introduced into superfluid helium nanodroplets and the resulting clusters were analyzed by time-of-flight mass spectrometry. Clusters of higher abundances (magic number clusters) were identified and the corresponding potential cluster geometries were obtained from GFN2-xTB and DFT computations. We found that the studied diamondoid ethers readily self-assemble in helium nanodroplets and that London dispersion attraction between hydrocarbon subunits acts as a driving force for cluster formation. On the other hand, hydrogen bonding between ether oxygens and trace water molecules fosters the eventual breakdown of the initial supramolecular aggregate.

Observation of Dirac Charge-Density Waves in Bi2Te2Se.

While parallel segments in the Fermi level contours, often found at the surfaces of topological insulators (TIs), would imply "strong" nesting conditions, the existence of charge-density waves (CDWs)-periodic modulations of the electron density-has not been verified up to now. Here, we report the observation of a CDW at the surface of the TI Bi2Te2Se(111), below ≈350K, by helium-atom scattering and, thus, experimental evidence for a CDW involving Dirac topological electrons. Deviations of the order parameter observed below 180K, and a low-temperature break of time reversal symmetry, suggest the onset of a spin-density wave with the same period as the CDW in the presence of a prominent electron-phonon interaction, originating from Rashba spin-orbit coupling.

Quantitative proteomic analysis of extracellular vesicles in response to baculovirus infection of a Trichoplusia ni cell line.

Due to its outstanding suitability to produce complex biopharmaceutical products including virus-like particles and subunit vaccines, the baculovirus/insect cell expression system has developed into a highly popular production platform in the biotechnological industry. For high productivity, virus-cell communication and an efficient spreading of the viral infection are crucial, and, in this context, extracellular vesicles (EVs) might play a significant role. EVs are small particles, utilized by cells to transfer biologically active compounds such as proteins, lipids as well as nucleic acids to recipient cells for intracellular communication. Studies in mammalian cells showed that the release of EVs is altered in response to infection with many viruses, ultimately either limiting or fostering infection spreading. In this study we isolated and characterized EVs, from both uninfected and baculovirus infected Tnms42 insect cells. Via quantitative proteomic analysis we identified more than 3000 T. ni proteins in Tnms42 cell derived EVs, of which more than 400 were significantly differentially abundant upon baculovirus infection. Subsequent gene set enrichment analysis revealed a depletion of proteins related to the extracellular matrix in EVs from infected cultures. Our findings show a significant change of EV protein cargo upon baculovirus infection, suggesting a major role of EVs as stress markers. Our study might serve in designing new tools for process monitoring and control to further improve biopharmaceutical production within the baculovirus/insect cell expression system.

Mixed-metal nanoparticles: phase transitions and diffusion in Au-VO clusters.

Nanoparticles with diameters in the range of a few nanometers, consisting of gold and vanadium oxide, are synthesized by sequential doping of cold helium droplets in a molecular beam apparatus and deposited on solid carbon substrates. After surface deposition, the samples are removed and various measurement techniques are applied to characterize the created particles: scanning transmission electron microscopy (STEM) at atomic resolution, temperature dependent STEM and TEM up to 650 °C, energy-dispersive X-ray spectroscopy (EDXS) and electron energy loss spectroscopy (EELS). In previous experiments we have shown that pure V2O5 nanoparticles can be generated by sublimation from the bulk and deposited without affecting their original stoichiometry. Interestingly, our follow-up attempts to create Au@V2O5 core@shell particles do not yield the expected encapsulated structure. Instead, Janus particles of Au and V2O5 with diameters between 10 and 20 nm are identified after deposition. At the interface of the Au and the V2O5 parts we observe an epitaxial-like growth of the vanadium oxide next to the Au structure. To test the temperature stability of these Janus-type particles, the samples are heated in situ during the STEM measurements from room temperature up to 650 °C, where a reduction from V2O5 to V2O3 is followed by a restructuring of the gold atoms to form a Wulff-shaped cluster layer. The temperature dependent dynamic interplay between gold and vanadium oxide in structures of only a few nanometer size is the central topic of this contribution to the Faraday Discussion.

Evolution of ordered nanoporous phases during h-BN growth: controlling the route from gas-phase precursor to 2D material by in situ monitoring.

Large-area single-crystal monolayers of two-dimensional (2D) materials such as graphene and hexagonal boron nitride (h-BN) can be grown by chemical vapour deposition (CVD). However, the high temperatures and fast timescales at which the conversion from a gas-phase precursor to the 2D material appears, make it extremely challenging to simultaneously follow the atomic arrangements. We utilise helium atom scattering to discover and control the growth of novel 2D h-BN nanoporous phases during the CVD process. We find that prior to the formation of h-BN from the gas-phase precursor, a metastable (3 × 3) structure is formed, and that excess deposition on the resulting 2D h-BN leads to the emergence of a (3 × 4) structure. We illustrate that these nanoporous structures are produced by partial dehydrogenation and polymerisation of the borazine precursor upon adsorption. These steps are largely unexplored during the synthesis of 2D materials and we unveil the rich phases during CVD growth. Our results provide significant foundations for 2D materials engineering in CVD, by adjusting or carefully controlling the growth conditions and thus exploiting these intermediate structures for the synthesis of covalent self-assembled 2D networks.

Surface electronic corrugation of a one-dimensional topological metal: Bi(114).

The surface of Bi(114) is a striking example where the reduced dimensionality gives rise to structural rearrangement and new states at the surface. Here, we present a study of the surface structure and electronic corrugation of this quasi one-dimensional topological metal based on helium atom scattering (HAS) measurements. In contrast to low-index metal surfaces, upon scattering from the stepped (114) truncation of Bi, a large proportion of the incident beam is scattered into higher order diffraction channels which in combination with the large surface unit cell makes an analysis challenging. The surface electronic corrugation of Bi(114) is determined, using measurements upon scattering normal to the steps, together with quantum mechanical scattering calculations. Therefore, minimisation routines that vary the shape of the corrugation are employed, in order to minimise the deviation between the calculations and experimental scans. Furthermore, we illustrate that quantum mechanical scattering calculations can be used to determine the orientation of the in- and outgoing beam with respect to the stepped surface structure.

London dispersion dominating diamantane packing in helium nanodroplets.

Diamantane clusters formed inside superfluid helium nanodroplets were analyzed by time-of-flight mass spectrometry. Distinct cluster sizes were identified as "magic numbers" and the corresponding feasible structures for clusters consisting of up to 19 diamantane molecules were derived from meta-dynamics simulations and subsequent DFT computations. The obtained interaction energies were attributed to London dispersion attraction. Our findings demonstrate that diamantane units readily form assemblies even at low pressures and near-zero Kelvin temperatures, confirming the importance of the intermolecular dispersion effect for condensation of matter.

Chemical Gastroenterocolitis after Dental Root Canal Therapy with Camphorated and Mentholated Chlorophenol.

A 78-year-old man with a history of pancolitis, after the treatment of dental abscess with oral antibiotics and local application of camphorated and mentholated chlorophenol (CMCP), presented with abdominal pain of 4-day duration, as well as hair loss in the area of moustache and finger nail lifting. He was already treated with rectal application of budesonide because of pancolitis, diagnosed 6 weeks ago and interpreted as an allergic reaction to clindamycin. For further investigation, we performed gastroscopy and colonoscopy, which showed the edematous mucosa with polypus-like changes of the whole mucosa of the stomach, duodenum, first part of the jejunum, distal ileum, complete colon, and rectum. The diagnosis was complicated and was achieved in synopsis with anamnestic details, such as endodontic application of camphorated chlorophenol. The patient symptoms abated after he commenced on mesalazine therapy.

Material properties particularly suited to be measured with helium scattering: selected examples from 2D materials, van der Waals heterostructures, glassy materials, catalytic substrates, topological insulators and superconducting radio frequency materials.

Helium Atom Scattering (HAS) and Helium Spin-Echo scattering (HeSE), together helium scattering, are well established, but non-commercial surface science techniques. They are characterised by the beam inertness and very low beam energy (<0.1 eV) which allows essentially all materials and adsorbates, including fragile and/or insulating materials and light adsorbates such as hydrogen to be investigated on the atomic scale. At present there only exist an estimated less than 15 helium and helium spin-echo scattering instruments in total, spread across the world. This means that up till now the techniques have not been readily available for a broad scientific community. Efforts are ongoing to change this by establishing a central helium scattering facility, possibly in connection with a neutron or synchrotron facility. In this context it is important to clarify what information can be obtained from helium scattering that cannot be obtained with other surface science techniques. Here we present a non-exclusive overview of a range of material properties particularly suited to be measured with helium scattering: (i) high precision, direct measurements of bending rigidity and substrate coupling strength of a range of 2D materials and van der Waals heterostructures as a function of temperature, (ii) direct measurements of the electron-phonon coupling constant λ exclusively in the low energy range (<0.1 eV, tuneable) for 2D materials and van der Waals heterostructures (iii) direct measurements of the surface boson peak in glassy materials, (iv) aspects of polymer chain surface dynamics under nano-confinement (v) certain aspects of nanoscale surface topography, (vi) central properties of surface dynamics and surface diffusion of adsorbates (HeSE) and (vii) two specific science case examples - topological insulators and superconducting radio frequency materials, illustrating how combined HAS and HeSE are necessary to understand the properties of quantum materials. The paper finishes with (viii) examples of molecular surface scattering experiments and other atom surface scattering experiments which can be performed using HAS and HeSE instruments.

Atom-surface van der Waals potentials of topological insulators and semimetals from scattering measurements.

The phenomenology of resonant scattering has been known since the earliest experiments upon scattering of atomic beams from surfaces and is a means of obtaining experimental information about the fundamentals of weak adsorption systems in the van der Waals regime. We provide an overview of the experimental approach based on new experimental data for the He-Sb2Te3(111) system, followed by a comparative overview and perspective of recent results for topological semimetal and insulator surfaces. Moreover, we shortly discuss the perspectives of calculating helium-surface interaction potentials from ab initio calculations. Our perspective demonstrates that atom-surface scattering provides direct experimental information about the atom-surface interaction in the weak physisorption regime and can also be used to determine the lifetime and mean free path of the trapped atom. We further discuss the effects of elastic and inelastic scattering on the linewidth and lifetime of the trapped He atom with an outlook on future developments and applications.

Shell-Isolated Au Nanoparticles Functionalized with Rhodamine B Fluorophores in Helium Nanodroplets.

Nanoparticles consisting of three different materials in a layered core@shell@shell structure are synthesized in cold helium droplets by sequential doping. Upon the formation of Au core particles, a first shell layer is formed by adding either Ar, isopropyl alcohol, or hexane. Subsequently, the droplets are doped with rhodamine B (RB) molecules; fluorescence spectra recorded upon laser excitation at 532 nm provide insight into the structure of the formed complexes. For the two-component Au@RB system, the RB fluorescence is quenched in the presence of the Au core. If an intermediate isolating shell layer is introduced (Au@shell@RB), the fluorescence increases again. The results demonstrate that shell-isolated nanoparticles can be formed inside He nanodroplets and functionalized in situ with additional molecules. As the structure of the particles depends on the pickup sequence, the approach can be exploited for the synthesis and investigation of a large variety of different combinations of plasmonic metals, intermediate layers, and molecules.

Inelastic helium atom scattering from Sb2Te3(111): phonon dispersion, focusing effects and surfing.

We present an experimental study of inelastic scattering processes on the (111) surface of the topological insulator Sb2Te3 using helium atom scattering. In contrast to other binary topological insulators such as Bi2Se3 and Bi2Te3, Sb2Te3 is much less studied and the as-grown Sb2Te3 sample turns out to be p-doped, with the Fermi-level located below the Dirac-point as confirmed by angle-resolved photoemission spectroscopy. We report the surface phonon dispersion along both high symmetry directions in the energy region below 11 meV, where the Rayleigh mode exhibits the strongest intensity. The experimental data is compared with a study based on density functional perturbation theory calculations, providing good agreement except for a set of additional peculiar inelastic events below the Rayleigh mode. In addition, an analysis of angular scans with respect to a number of additional inelastic events is presented, including resonance enhancement, kinematical focusing, focused inelastic resonance and surfing. In the latter case, phonon-assisted adsorption of the incident helium atom gives rise to a bound state where the helium atom rides the created Rayleigh wave.