Influence of bioceramic intracanal medication on the bond strength of bioceramic root canal sealer.

To investigate the influence of the remaining volume of a new intracanal medication based on bioceramic compounds on the bond strength (BS) and formation of an adhesive interface between calcium silicate-based and epoxy resin-based root canal sealers. For this purpose, the specimens were distributed according to the intracanal medication (n = 26): Bio-C Temp (BCT) and Ultracal XS (UXS). The roots were scanned in microCT, and after 7 days, the medication was removed. Then a new scan was performed to evaluate the volume of medication remaining. Subsequently, 40 specimens were redistributed into 2 subgroups (n = 10) and filled according to the sealer used: AH Plus (AHP) and Bio-C Sealer (BCS), to assess the bond strength by using the push-out test, and the adhesive interface by confocal laser fluorescence microscopy (CLSM) and scanning electron microscopy (SEM). The t test showed a smaller remainder of BCT (1.77 ± 0.86) compared with UXS (10.47 ± 5.78), irrespective of the root third evaluated. The BS showed that teeth with BCT + BCS had higher bond strength values (3.70 ± 1.22) when compared to the other groups: BCT + AHP (2.15 ± 1.07), UXS + BCS (3.18 ± 1.09) and UXS + AHP (2.11 ± 1.02) (p<0.001). The cervical third had higher BS when compared with the middle and apical thirds (p < 0.001), and higher number of adhesive failures. The adhesive interface in SEM and CLSM images showed better adaptation for the association between BCT + BCS. Intracanal medication and silicate-based endodontic sealer appeared to interact chemically by forming a biomineralizing layer, allowing for an increase in the bond strength and forming an adhesive interface between the materials, with no or less gap formation.

Influence of bioceramic intracanal medication on the bond strength of bioceramic root canal sealer

Abstract To investigate the influence of the remaining volume of a new intracanal medication based on bioceramic compounds on the bond strength (BS) and formation of an adhesive interface between calcium silicate-based and epoxy resin-based root canal sealers. For this purpose, the specimens were distributed according to the intracanal medication (n = 26): Bio-C Temp (BCT) and Ultracal XS (UXS). The roots were scanned in microCT, and after 7 days, the medication was removed. Then a new scan was performed to evaluate the volume of medication remaining. Subsequently, 40 specimens were redistributed into 2 subgroups (n = 10) and filled according to the sealer used: AH Plus (AHP) and Bio-C Sealer (BCS), to assess the bond strength by using the push-out test, and the adhesive interface by confocal laser fluorescence microscopy (CLSM) and scanning electron microscopy (SEM). The t test showed a smaller remainder of BCT (1.77 ± 0.86) compared with UXS (10.47 ± 5.78), irrespective of the root third evaluated. The BS showed that teeth with BCT + BCS had higher bond strength values (3.70 ± 1.22) when compared to the other groups: BCT + AHP (2.15 ± 1.07), UXS + BCS (3.18 ± 1.09) and UXS + AHP (2.11 ± 1.02) (p<0.001). The cervical third had higher BS when compared with the middle and apical thirds (p < 0.001), and higher number of adhesive failures. The adhesive interface in SEM and CLSM images showed better adaptation for the association between BCT + BCS. Intracanal medication and silicate-based endodontic sealer appeared to interact chemically by forming a biomineralizing layer, allowing for an increase in the bond strength and forming an adhesive interface between the materials, with no or less gap formation.

Influence of different calcium hydroxide removal protocols on the bond strength of epoxy resin-based sealer in long oval root canals.

This study evaluated the effect of different protocols for Ca(OH)2 removal on the bond strength (BS) of epoxy resin-based sealer in long oval root canals. Forty-eight mandibular incisors with long oval root canals were selected by CBCT. Biomechanical preparation was performed, the samples were filled with Ca(OH)2 paste and distributed in four groups (n = 12): G-without Ca(OH)2 paste (C); G2-syringe/needle (SN); G3-SN + XP-Endo® Finisher (XPF); G4-SN + passive ultrasonic irrigation (PUI). After 7 days, Ca(OH)2 was removed and teeth were filled using AHPlus and guttapercha. In four samples from each group, the sealer was manipulated with 0.1% rhodamine to assess sealer penetration by fluorescent laser confocal microscopy (FLCM). Samples were sectioned in slices for BS, scanning electron microscopy, and FLCM analysis. The BS data were analyzed by ANOVA and Tukey tests (α = 0.05). The lowest BS values were found for the SN group (12.89 ± 4.36) compared to C (35.55 ± 10.05), while PUI group presented intermediate values (28.57 ± 9.35) and the XPF group (31.34 ± 9.8) showed values that were sometimes similar to C group and sometimes similar to PUI group (p > .05). The analysis of the adhesive interface showed evident gaps, with the presence of residues between the dentin and the filling material for the SN group, and for C, XPF and PUI groups juxtaposed adhesive interface. FLCM images showed sealer penetration in the dentinal tubules along the entire perimeter for C, XPF, and PUI groups. Ca(OH)2 removal with XPF and PUI from long oval root canals resulted in higher bond strength values compared to SN, besides better sealer penetration on dentinal tubules and juxtaposed adhesive interface.

A CAD/CAM-based strategy for concurrent endodontic and restorative treatment.

This case report describes a technique in which endodontic treatment and permanent indirect restoration were completed in the same clinical appointment with the aid of a computer-aided design/computer-aided manufacturing (CAD/CAM) system. Two patients were diagnosed with irreversible pulpitis of the mandibular first molar. After access preparation, root canals were located, irrigation was performed until bleeding ceased, and the coronal tooth structure was prepared for indirect restoration. Then, utilizing an interim 3-mm build-up of the endodontic access cavity, a hemi-arch digital scan was performed with an intraoral scanner. Subsequent to digital scanning, restoration design was performed simultaneously with the endodontic procedure. The root canals were shaped using the Race system under irrigation with 2.5% sodium hypochlorite followed by root canal filling. The pulp chamber was subsequently filled with a 3-mm-thick composite resin restoration mimicking the interim build-up previously utilized to facilitate block milling in the CAD/CAM system. Clinical try-in of the permanent onlay restoration was followed by acid etching, application of a 5th generation adhesive, and cementation of the indirect restoration. Once the restoration was cemented, rubber dam isolation was removed, followed by occlusal adjustment and polishing. After 2 years of follow-up, the restorations were esthetically and functionally satisfactory, without complications.

Estudio preliminar sobre la repetibilidad in vivo de tres localizadores apicales electrónicos / Preliminary study about in vivo repeatability of three electronic apex locators

RESUMEN Introducción: La mayoría de los estudios han evaluado y comparado la exactitud de los localizadores apicales electrónicos pero pocos evaluaron la repetibilidad del método de medición; de estos casi todos son ex vivo. Objetivo: Comparar la repetibilidad in vivo de tres localizadores apicales electrónicos en dientes antero-superiores permanentes. Métodos: Se realizó un estudio observacional analítico de corte transversal en 14 pacientes adultos sanos de ambos sexos con indicación de tratamiento de conductos en una pieza dentaria antero-superior. La selección fue por casos consecutivos. Se utilizaron tres localizadores apicales electrónicos (Root ZX II, Canal Pro y RomiApex A-15) para realizar las mediciones de los conductos. Dos operadores independientes realizaron dos mediciones con cada localizador apical electrónico. Los datos se analizaron por medio de la prueba de Bland-Altman para la repetibilidad y la prueba de Friedman para comparar los localizadores apicales. Resultados: La edad media (desviación estándar) de los pacientes fue 28,79 (± 9,12) años; 8 (57,1 por ciento) pacientes fueron del sexo femenino. La media de las diferencias (límites de concordancia) de las mediciones para Root ZX, Canal Pro y RomiApex A-15 fueron 0,13 mm (± 0,42), 0,12 mm (± 0,88), y 0,18 (± 0,76) mm, respectivamente. Conclusiones. El Root ZX presentó el mayor grado de repetibilidad, seguido por el RomiApex. No se encontraron diferencias estadísticamente significativas entre los localizadores en cuanto a las diferencias absolutas entre la 1ra y 2da mediciones(AU)

ABSTRACT Introduction: Most studies have evaluated and compared the accuracy of electronic apex locators, but few have addressed the repeatability of the measurement method, and most are ex vivo. Objective: Compare the in vivo repeatability of three electronic apex locators in permanent upper front teeth. Methods: An analytic observational cross-sectional study was conducted of 14 healthy adult patients of both sexes with root canal therapy indicated in an upper front tooth. The consecutive case method was used to select the patients. Three electronic apex locators (Root ZX II, Canal Pro and RomiApex A-15) were used for root canal measurement. Two independent operators performed two measurements with each electronic apex locator. Data were analyzed using the Bland-Altman test to assess repeatability and the Friedman test to compare the apex locators. Results: Mean age (standard deviation) of the patients was 28.79 (± 9.12) years; 8 patients (57.1 percent) were female. The mean differences (limits of agreement) of the measurements made by Root ZX, Canal Pro and RomiApex A-15 were 0.13 mm (± 0.42), 0.12 mm (± 0.88) and 0.18 (± 0.76) mm, respectively. Conclusions: Root ZX displayed the highest repeatability, followed by RomiApex. Statistically significant variations were not found between the locators as to absolute differences between the 1st and 2nd measurement(AU)