Comprehensive analysis and investigation of accident/occupational disease responsibility rates: A case study for accidental CO poisoning.

One of the major problems of courts and insurance companies is the lack of a proper technique to determine the rate of responsibility of the parties involved in the accident. The aim of this study was to determine the Accident/Occupational Diseases Responsibility Rates (AOD RR) for complex events. Accordingly, a case study of a complex accident of carbon monoxide (CO) poisoning was selected and Occupational Accident Tree Analysis (OATA) and Occupational Accident Component Analysis (OACA) techniques, which were solely used to investigate occupational accidents, were used with the new names Accident/Occupational Disease Tree Analysis (AOD TA) and Accident/Occupational Disease Component Analysis (AOD CA) to evaluate their applicability to investigate non-occupational accidents and occupational diseases. For this purpose, causes of CO penetration to victims' room was assessed using gas tracking methods. Finally, Fuzzy Accident/Occupational Disease Tree/Component Analysis (FAOD TA and FAOD CA) techniques were developed and used for determining AOD RR in fuzzy environment. The results showed that the AOD RR obtained by AOD TA and AOD CA based on the average of experts' personal opinions and consensus between experts, and AOD TA and AOD CA in a fuzzy environment were close to each other, with the power terminal and the power cable crossing route being the main routes of transmission and penetration of CO to the victims' room. Also, the owner, contractor, tenant, and serviceman were responsible for the CO poisoning of victims. It can be concluded that any hole, crack, or fission in the building can result in CO penetration to the individuals' living rooms, and gas tracking in early winter, especially in older buildings, plays a very significant role in preventing residents' poisoning. Further, due to the uncertainty of AOD TA and AOD CA techniques, it is recommended to use FAOD TA and FAOD CA techniques for increasing the accuracy of the results. This will enhance the court and insurance companies' trust in the opinions of accident investigation experts, decrease delays in the proceedings, and prevent any violation of the individual rights.

Evaluation of the influence of education on the ergonomic risk of concrete form workers.

BACKGROUND: In developing countries, construction is a largely manual job that imposes awkward postures on workers, thus facilitating a variety of musculoskeletal disorders. Ergonomic training is known as an effective way to reduce these disorders. OBJECTIVE: This study aimed to evaluate the effectiveness of ergonomic training intervention in reducing the ergonomic risk of concrete form workers. METHODS: This quasi-experimental study was carried out on 144 concrete form workers employed in the construction projects of Gonbad-e Kavus, Iran, Iran. Data was collected using the Nordic Musculoskeletal Questionnaire (at the pre-intervention stage) and the Rapid Entire Body Assessment (REBA) worksheet (at the pre- and post-intervention stages). Ergonomic training was provided via face-to-face educational meetings along with presenting informative pamphlets, which took place over 45 days duration of time. Data were analyzed by the use of SPSS software version 21, t-test and Wilcoxon test. Significant level was considered at P-value less than 0.05. RESULTS: Musculoskeletal disorders were observed in all limbs of the studied workers. The most prevalent disorders were the pain in the shoulder region of lift operators (86.1%) and the pain in the back area of mixer operators (77.8%). About 99.3% of all concrete form workers were exposed to a moderate level of ergonomic risk and needed posture correction. Pre- and post-training REBA scores showed a statistically significant difference (P < 0.05). CONCLUSION: Although the ergonomic training did reduce the ergonomic risk of workers, because of its short duration, it failed to reduce this risk to an acceptable level. It is recommended to hold both theoretical and practical training sessions over longer periods of time.

Predicting the relationship between safety climate and safety performance in cement industry.

BACKGROUND: As cement industries have remarkably affected the economy of producer's countries, one of the main concerns of these industries is to prevent accidents and related costs. OBJECTIVE: The present study investigates the relationship between the safety climate and safety performance with the moderating role of safety knowledge and the mediating role of safety motivation in the cement industry. METHODS: Data were collected from 230 Iranian employees of the cement industry using a safety climate and performance questionnaire. The relationships between variables and analysis of the collected data were tested using structural equation modeling. RESULTS: The results indicated that the safety climate had a positive effect on safety performance in the cement industry. Moreover, management's commitment to safety was positively or negatively related to the social support and production pressure. There was either a positive and negative relationship between social support and production pressure of safety knowledge and safety motivation, respectively. CONCLUSION: The integrative model suggested that it was important to promote the safety knowledge at all organizational levels to develop spontaneous activities and raise safety in the intended organization.

Excessive Daytime Sleepiness and Safety Performance: Comparing Proactive and Reactive Approaches.

BACKGROUND: Sleep disorders and excessive daytime sleepiness negatively affect employees' safety performance. OBJECTIVE: To investigate the relationship between excessive daytime sleepiness with obstructive sleep apnea and safety performance at an oil construction company in Iran. METHODS: 661 employees consented to participate in this study. Excessive daytime sleepiness was measured with the STOP-BANG questionnaire and Epworth Sleepiness Scale (ESS). To determine how sleepiness would affect the studied occupational incidents, accidents causing injury and near misses, both reactive data and proactive safety performance indices were measured. Demographic and predictor variables were analyzed with hierarchical multiple linear regression. RESULTS: Employees who met the criteria of excessive daytime sleepiness and obstructive sleep apnea had significantly poorer safety performance indicators. STOP-BANG and ESS were significant predictors of safety compliance (ß 0.228 and 0.370, respectively), safety participation (ß 0.210 and 0.144, respectively), and overall safety behavior (ß 0.332 and 0.213, respectively). Further, occupational incidents were 2.5 times higher in workers with indicators of excessive daytime sleepiness and 2 times higher in those with obstructive sleep apnea compared with those without. CONCLUSION: These findings confirmed that excessive daytime sleepiness is a serious safety hazard, and that both reactive and proactive measures are important to understand the relative contribution of predictor variables.

Relationships between certain individual characteristics and occupational accidents.

Background. Work accidents and injuries are an occupational health and safety problem. Methods. This cross-sectional study was conducted for 404 frontline workers who were randomly selected from the Arya Sasol Petrochemical Company in Bushehr, Iran, during 2016. A statistical analysis was performed using the χ2 test and the logistic regression model with SPSS version 18. Results. The overall occupational accident rate among the participants was found to be 9.2%. Statistically significant differences were observed for body mass index, education, job experience, smoking habit, consumption of sedative pills and presence of sleep disorders. Three factors had significant adjusted odds ratios (ORs): body mass index (OR 2.41, 95% confidence interval [CI] [1.16, 5.04]), education (OR 0.25, 95% CI [0.07, 0.85]) and job experience (OR 0.29, 95% CI [0.15, 0.57]). Conclusions. Preventive programs should be implemented for industrial workers, especially young workers, workers who smoke, overweight workers and workers with psychosomatic disease.

Development and validation of a new safety climate scale for petrochemical industries.

BACKGROUND: While a considerable body of research has studied safety climate and its role as a leading indicator of organizational safety, much of this work has been conducted with Western manufacturing samples. OBJECTIVE: The current study puts emphasis on the cross-validation of a safety climate model in the non-Western industrial context of Iranian petrochemical industries. METHODS: The current study was performed in one petrochemical company in Iran. The scale was developed through conducting a literature review followed by a qualitative study with expert participation. After performing a screening process, the initial number of items on the scale was reduced to 68. RESULTS: Ten dimensions (including management commitment, workers' empowerment, communication, blame culture, safety training, job satisfaction, interpersonal relationship, supervision, continuous improvement, and reward system) together with 37 items were extracted from the exploratory factor analysis (EFA) to measure safety climate. Acceptable ranges of internal consistency statistics for the sub-scales were observed. Confirmatory factor analysis (CFA) confirmed the construct validity of the developed safety climate scale for the petrochemical industry workers. The results of reliability showed that the Cronbach's alpha coefficient for the designed scale was 0.94. The ICC was obtained 0.92. CONCLUSION: This study created a valid and reliable scale for measuring safety climate in petrochemical industries.

A Qualitative Study on Organizational Factors Affecting Occupational Accidents.

BACKGROUND: Technical, human, operational and organizational factors have been influencing the sequence of occupational accidents. Among them, organizational factors play a major role in causing occupational accidents. The aim of this research was to understand the Iranian safety experts' experiences and perception of organizational factors. METHODS: This qualitative study was conducted in 2015 by using the content analysis technique. Data were collected through semi-structured interviews with 17 safety experts working in Iranian universities and industries and analyzed with a conventional qualitative content analysis method using the MAXQDA software. RESULTS: Eleven organizational factors' sub-themes were identified: management commitment, management participation, employee involvement, communication, blame culture, education and training, job satisfaction, interpersonal relationship, supervision, continuous improvement, and reward system. The participants considered these factors as effective on occupational accidents. CONCLUSION: The mentioned 11 organizational factors are probably involved in occupational accidents in Iran. Naturally, improving organizational factors can increase the safety performance and reduce occupational accidents.

Occupational exposure to manganese-containing welding fumes and pulmonary function indices among natural gas transmission pipeline welders.

OBJECTIVES: The objectives of this study were to evaluate manganese (Mn)-containing welding fumes' exposure, assess urinary Mn as a biomarker for Mn exposure and investigate the correlation of Mn in air, total fumes and urinary Mn with pulmonary function indices in 118 welders and 37 unexposed controls from two regions in Iran, Assaluyeh and Borujen. METHODS: Air samples were collected on mixed cellulose ester membrane filters in personal air samplers and then analyzed using inductively coupled plasma atomic emission spectroscopy (ICP-AES) (NIOSH Method 7300). For all participants, urine samples were collected during the entire work shift, and Mn in urine was determined by graphite furnace atomic absorption spectroscopy according to NIOSH Method 8310. Spirometric measurements were also done for participants. RESULTS: The maximum exposures to airborne Mn and total fumes were 0.304 ± 0.256 mg/m(3) and 21.52 ± 9.40 mg/m(3), respectively. The urine Mn levels in the various groups ranged between 0.77 to 7.58 µg/l. The correlation between airborne Mn and urinary Mn was significant for total whole participants. Some values of spirometric indices were statistically lower in welders rather than controls. CONCLUSIONS: Our results indicate that many welders have been exposed to higher concentrations of Mn-containing welding fumes. Urinary Mn can be used as a biomarker for Mn exposure. There were weak inverse correlations between Mn-containing welding fumes and pulmonary function indices, and the inverse correlation between urinary Mn with forced vital capacities (FVC) and forced expiratory volume in 1 s (FEV1) was significant.