Strength performance of low-bearing-capacity clayey soils stabilized with ladle furnace slag.

In this paper, the performance of ladle furnace slag (LFS), a by-product of secondary steel refining, is evaluated as a binder to stabilize clayey soils of low bearing capacity. The aim is to define whether additions of this by-product to clayey soil can stabilize the soil in accordance with the technical specifications of Spanish standards. To do so, three different soils stabilized with 5% LFS were compared with the same soils stabilized with 2% lime and with no stabilization, in order to investigate their different behaviors. The chemical and mineralogical characterizations of all the soil mixes were conducted using X-ray fluorescence, X-ray diffraction, and scanning electron microscopy. The Atterberg limit test was used to study the plastic behavior of the soils, and the results of compaction, bearing capacity, unconfined compressive strength, and direct shear strength (cohesion and friction angle) tests defined their strength characteristics. The analysis was completed with the pH monitoring of the mixes along the curing time in order to relate the pH changes with the strength evolution. The addition of LFS to the soils has resulted in an increase in the liquid limit and plastic limit, causing therefore a slight decrease in the plasticity index. All the soils showed increases between 30% and 70% in their California Bearing Ratios immediately after mixing with 5% LFS, and after 90 days of curing, improvements of 30-188% in their unconfined compressive strength were noted in comparison with untreated soil, which were higher than the lime-stabilized soils. The cohesion of soils stabilized with LFS at 28 days of curing obtained improvements ranging from 40 to 300% depending on the type of soil. However, the friction angle showed a slight increase of 10% in two of the soils and zero in another. The high initial pH in LFS-stabilized soils was maintained during the curing time, which favored the development of pozzolanic reactions that improve the soil strength. These results confirmed that the substitution of lime with LFS is a feasible option for soil stabilization.

Electro-optical Study of the Anomalous Rotational Diffusion in Polymer Solutions.

Brownian diffusion of spherical nanoparticles is usually exploited to ascertain the rheological properties of complex media. However, the behavior of the tracer particles is affected by a number of phenomena linked to the interplay between the dynamics of the particles and polymer coils. For this reason, the characteristic lengths of the dispersed entities, depletion phenomena, and the presence of sticking conditions have been observed to affect the translational diffusion of the probes. On the other hand, the retardation effect of the host fluid on the rotational diffusion of nonspherical particles is less understood. We explore the possibility of studying this phenomenon by analyzing the electro-orientation of the particles in different scenarios in which we vary the ratio between the particle and polymer characteristic size, and the geometry of the particles, including both elongated and oblate shapes. We find that the Stokes-Einstein relation only applies if the radius of gyration of the polymer is much shorter than the particle size and when some repulsive interaction between both is present.

Teaching lessons learnt by civil-engineering teachers from the COVID-19 pandemic at the University of Burgos, Spain.

The COVID-19 lockdown in Spain caused abrupt changes for students following the Bachelor's Degree in Civil Engineering at the University of Burgos when face-to-face classes switched to online teaching. The recovery of face-to-face teaching after lockdown meant that classes were taught with obligatory social distancing and the use of masks. Teachers were therefore unable to interact with students closely, to perceive their facial expressions during class, or to conduct group work. The changes to civil-engineering teaching linked to the COVID-19 pandemic and the lessons that civil-engineering teachers learnt from the new teaching scenarios are studied in this paper. The reflections of teachers throughout all three stages of the pandemic (pre-pandemic and lockdown, during lockdown, and post-lockdown), and the qualitative and mixed analysis of their responses to a survey of open-ended questions contributed to the identification of six major lessons: (1) asking questions and using real-time quiz tools enliven classes and help to determine which concepts to emphasize for proper student understanding; (2) autonomous student learning can be promoted through the provision of supplementary documentation and the digitalization of solutions to classroom exercises; (3) virtual site visits and real visual examples interspersed with explanations bring concepts closer to their real applications; (4) the delivery of projects in the form of audio-recorded presentations enable their distribution, so that other students can also learn from them as well as the students who created them; (5) online videoconferences, adapted to the concepts that are addressed, facilitate fast and flexible communication with students; and (6) online continuous-assessment exams can promote better student learning patterns and final-exam preparation. Nevertheless, these six lessons were drawn from the experience of teachers at a small Spanish university where the period of solely online teaching during the COVID-19 pandemic lasted only four months. Thus, it would be interesting to analyze the experience of civil-engineering teachers at larger universities and universities that had longer periods of solely online teaching. A study of the level of implementation of the six aspects when the pandemic is declared over might also be worthwhile.

In vivo time-course biocompatibility assessment of biomagnetic nanoparticles-based biomaterials for tissue engineering applications.

Novel artificial tissues with potential usefulness in local-based therapies have been generated by tissue engineering using magnetic-responsive nanoparticles (MNPs). In this study, we performed a comprehensive in vivo characterization of bioengineered magnetic fibrin-agarose tissue-like biomaterials. First, in vitro analyses were performed and the cytocompatibility of MNPs was demonstrated. Then, bioartificial tissues were generated and subcutaneously implanted in Wistar rats and their biodistribution, biocompatibility and functionality were analysed at the morphological, histological, haematological and biochemical levels as compared to injected MNPs. Magnetic Resonance Image (MRI), histology and magnetometry confirmed the presence of MNPs restricted to the grafting area after 12 weeks. Histologically, we found a local initial inflammatory response that decreased with time. Structural, ultrastructural, haematological and biochemical analyses of vital organs showed absence of damage or failure. This study demonstrated that the novel magnetic tissue-like biomaterials with improved biomechanical properties fulfil the biosafety and biocompatibility requirements for future clinical use and support the use of these biomaterials as an alternative delivery route for magnetic nanoparticles.

Generation of genipin cross-linked fibrin-agarose hydrogel tissue-like models for tissue engineering applications.

The generation of biomimetic and biocompatible artificial tissues is the basic research objective for tissue engineering (TE). In this sense, the biofabrication of scaffolds that resemble the tissues' extracellular matrix is an essential aim in this field. Uncompressed and nanostructured fibrin-agarose hydrogels (FAH and NFAH, respectively) have emerged as promising scaffolds in TE, but their structure and biomechanical properties must be improved in order to broaden their TE applications. Here, we generated and characterized novel membrane-like models with increased structural and biomechanical properties based on the chemical cross-linking of FAH and NFAH with genipin (GP at 0.1%, 0.25%, 0.5% and 0.75%). Furthermore, the scaffolds were subjected to rheological (G, G', G″ modulus), ultrastructural and ex vivo biocompatibility analyses. Results showed that all GP concentrations increased the stiffness (G) and especially the elasticity (G') of FAH and NFAH. Ultrastructural analyses demonstrated that GP and nanostructuration of FAH allowed us to control the porosity of FAH. In addition, biological studies revealed that higher concentration of GP (0.75%) started to compromise the cell function and viability. Finally, this study demonstrated the possibility to generate natural and biocompatible FAH and NFAH with improved structural and biomechanical properties by using 0.1%-0.5% of GP. However, further in vivo studies are needed in order to demonstrate the biocompatibility, biodegradability and regeneration capability of these cross-linked scaffolds.

Ex vivo characterization of a novel tissue-like cross-linked fibrin-agarose hydrogel for tissue engineering applications.

The generation of biomaterials with adequate biomechanical and structural properties remains a challenge in tissue engineering and regenerative medicine. Earlier research has shown that nanostructuration and cross-linking techniques improved the biomechanical and structural properties of different biomaterials. Currently, uncompressed and nanostructured fibrin-agarose hydrogels (FAH and NFAH, respectively) have been used successfully in tissue engineering. The aim of this study was to investigate the possibility of improving the structural and biomechanical properties of FAH and NFAH by using 0.25% and 0.5% (v/v) glutaraldehyde (GA) as a cross-linker. These non-cross-linked and cross-linked hydrogels were subjected to structural, rheological and ex vivo biocompatibility analyses. Our results showed that GA cross-linking induced structural changes and significantly improved the rheological properties of FAH and NFAH. In addition, ex vivo biocompatibility analyses demonstrated viable cells in all conditions, although viability was more compromised when 0.5% GA was used. Our study demonstrates that it is possible to control fiber density and hydrogel porosity of FAH and NFAH by using nanostructuration or GA cross-linking techniques. In conclusion, hydrogels cross-linked with 0.25% GA showed promising structural, biochemical and biological properties for use in tissue engineering.

Biocompatible magnetic core-shell nanocomposites for engineered magnetic tissues.

The inclusion of magnetic nanoparticles into biopolymer matrixes enables the preparation of magnetic field-responsive engineered tissues. Here we describe a synthetic route to prepare biocompatible core-shell nanostructures consisting of a polymeric core and a magnetic shell, which are used for this purpose. We show that using a core-shell architecture is doubly advantageous. First, gravitational settling for core-shell nanocomposites is slower because of the reduction of the composite average density connected to the light polymer core. Second, the magnetic response of core-shell nanocomposites can be tuned by changing the thickness of the magnetic layer. The incorporation of the composites into biopolymer hydrogels containing cells results in magnetic field-responsive engineered tissues whose mechanical properties can be controlled by external magnetic forces. Indeed, we obtain a significant increase of the viscoelastic moduli of the engineered tissues when exposed to an external magnetic field. Because the composites are functionalized with polyethylene glycol, the prepared bio-artificial tissue-like constructs also display excellent ex vivo cell viability and proliferation. When implanted in vivo, the engineered tissues show good biocompatibility and outstanding interaction with the host tissue. Actually, they only cause a localized transitory inflammatory reaction at the implantation site, without any effect on other organs. Altogether, our results suggest that the inclusion of magnetic core-shell nanocomposites into biomaterials would enable tissue engineering of artificial substitutes whose mechanical properties could be tuned to match those of the potential target tissue. In a wider perspective, the good biocompatibility and magnetic behavior of the composites could be beneficial for many other applications.

Early recurrences in histologically benign/grade I meningiomas are associated with large tumors and coexistence of monosomy 14 and del(1p36) in the ancestral tumor cell clone.

Tumor recurrence is the major clinical complication in meningiomas, and its prediction in histologically benign/grade I tumors remains a challenge. In this study, we analyzed the prognostic value of specific chromosomal abnormalities and the genetic heterogeneity of the tumor, together with other clinicobiological disease features, for predicting early relapses in histologically benign/grade I meningiomas. A total of 149 consecutive histologically benign/grade I meningiomas in patients who underwent complete tumor resection were prospectively analyzed. Using interphase fluorescence in situ hybridization, we studied the prognostic impact of the abnormalities detected for 11 different chromosomes, together with other relevant clinicobiological and histopathological characteristics of the disease, on recurrence-free survival (RFS) at 2.5, 5, and 10 years. From the prognostic point of view, losses of chromosomes 9, 10, 14, and 18 and del(1p36) were associated with a shorter RFS at 2.5, 5, and 10 years. Similarly, histologically benign/grade I meningiomas showing coexistence of monosomy 14 and del(1p36) in the ancestral tumor cell clone displayed a higher frequency of early relapses. In fact, coexistence of -14 and del(1p36) in the ancestral tumor cell clone, together with tumor size, represented the best combination of independent prognostic factors for the identification of those patients with a high risk of an early relapse. Our results indicate that patients with large histologically benign/grade I meningiomas carrying monosomy 14 and del(1p36) in their ancestral tumor cell clone have a high probability of relapsing early after diagnostic surgery. These findings suggest the need for closer follow-up in this small group of patients.

Her-2/neu gene amplification in familial vs sporadic breast cancer. Impact on the behavior of the disease.

We compared the incidence of Her-2/neu amplification in patients with and without a family history of breast cancer and correlated gene status with clinicobiologic and prognostic features in sporadic and familial cases. Of 108 patients, 28.7% had gene amplification. Among 96 cases with family history information available, 28 had an affected first-degree relative. The gene was amplified more frequently in familial than in sporadic cases (13/28 [46%] vs 14/68 [21%]; P = .01). Among familial cases, amplification was associated with adverse clinicobiologic features (poorly differentiated tumors [P = .05], larger tumors [P = .05], more lymph nodes involved [P = .04], and DNA aneuploid [P = .02] and highly proliferative tumors [P = .005]), and the relapse (P = .02) and disease-related death (P = .05) rates were higher than in cases without amplification. Among sporadic cases, amplification was not associated with significantly different disease features, except for a higher incidence of DNA aneuploid tumors (P = .01), percentage of S-phase tumor cells (P = .006), and lower proportion of estrogen (P = .001) and progesterone (P = .002) receptors. Her-2/neu amplification was observed more frequently among patients with a family history of breast cancer, in whom it was associated with adverse clinicobiologic features and a worse clinical outcome.