Efficient femtosecond optical parametric generation in group-velocity-matched MgO:PPLN at 10†MHz.

We report on efficient single-pass optical parametric generation (OPG) of broadband femtosecond pulses in the mid-infrared at 10 MHz by exploiting group-velocity-matched interaction in a 42-mm-long MgO:PPLN crystal. Using a microchip-started femtosecond amplified Mamyshev oscillator at 1064 nm as the pump, the OPG source can provide tunable femtosecond pulses across 1516-1566 nm in the signal and 3318-3568 nm in the idler, with slope efficiencies of ∼93% and ∼41%, respectively. For 650 mW of average input pump power, signal powers of up to 283 mW at 1524 nm are generated, with more than 200 mW over the entire tuning range. Idler average powers of up to 104 mW at 3450 nm, with more than 80 mW across the full range, are also obtained. For input pump pulses of ∼182 fs, the generated signal pulses have a duration of ∼460 fs at 1516 nm. The idler pulses have a typical bandwidth of ≥100 nm over the entire tuning range, and as wide as 181 nm at 3457 nm. The OPG source exhibits excellent passive power stability, better than 0.5% rms in the signal and 0.6% rms in the idler, over 1 h, both in Gaussian TEM00 spatial profile with M2 < 1.5.

Up-converted photorefractive optical transient detection with femtosecond laser pulses.

We report on experimental demonstration of optical transient detection (OTD) based on photorefractive two-wave mixing of femtosecond pulses. The demonstrated technique also combines nonlinear-crystal-based OTD with up-conversion from infrared into the visible range. The approach enables measurement of phase changes of a dynamic signal in the infrared using GaP- or Si-based detectors while suppressing stationary background. Experimental results reveal existence of the relation between input phases in the infrared and output phases in the visible wavelength range. We further present experimental evidence of additional merits of up-converted transient phase analysis under noisy conditions, such as residual continuous-wave emission affecting the ultrashort pulses from the laser.

Interferometric measurement of complex-field changes in transient detection imaging.

We report an experimental method that combines nonlinear-crystal-based transient detection imaging (TDI) with interferometric complex-field retrieval. The system allows measuring both phase and amplitude of a dynamic scene while suppressing stationary background. Theoretical and experimental results prove the linear relation existing between input and output phases, as well as the benefits of phase analysis for both detection and measurement with high resolutions of λ/30, even under noisy conditions. Additionally, we present experimental evidence of the remarkable ability of the technique to detect phase sign changes in the scene -what we call differential-phase TDI- showing great detection sensitivity and no calibration requirements.

Pump-tuned deep-infrared femtosecond optical parametric oscillator across 6-7 µm based on CdSiP2.

We report on a high-power femtosecond optical parametric oscillator (OPO) at 80 MHz repetition rate, tunable across 6318-7061 nm in the deep-infrared (deep-IR) using pump wavelength tuning. The OPO, based on CdSiP2 (CSP), is synchronously pumped by a commercial Ti:sapphire-pumped femtosecond OPO in the near-IR, enabling rapid static tuning of the CSP OPO with minimal adjustments to its cavity length. The deep-IR CSP OPO provides as much as 32 mW of average idler power at 6808 nm with spectral bandwidth >1000 nm (at -10 dB level) across the tuning range. By implementing intracavity dispersion control, near-transform-limited signal pulses of ∼100 fs duration with smooth single-peak spectrum are achieved at 1264 nm, corresponding to an idler wavelength at 6440 nm. To the best of our knowledge, this is the first time such practical idler powers in the deep-IR have been generated from a dispersion-compensated CSP femtosecond OPO at sub-100 MHz repetition rate.

Ti:sapphire-pumped deep-infrared femtosecond optical parametric oscillator based on CdSiP2.

We report on a femtosecond optical parametric oscillator (OPO) for the deep-infrared (deep-IR) based on the Kerr-lens-mode-locked Ti:sapphire laser as the pump source. By deploying a novel cascaded intracavity arrangement, comprising a femtosecond OPO based on the nonlinear crystal, CdSiP2, synchronously pumped internal to a MgO:PPLN femtosecond OPO, we have generated broadly tunable radiation across 5958-8117 nm using rapid static cavity delay tuning, with a maximum power of 64 µW at 6791 nm, limited by the absorption in mirror substrates as well as polarization-dependent intracavity losses. The deep-IR idler power exhibits excellent passive stability of better than 1.1% rms over 2 h, with a spectral bandwidth as large as ∼650 nm at ∼6800 nm. The demonstrated concept is generic and can be similarly deployed in other operating time scales and wavelength regions, also using different laser pump sources and nonlinear materials.

Two-crystal, synchronously pumped, femtosecond optical parametric oscillator.

We demonstrate a femtosecond optical parametric oscillator based on two nonlinear crystals synchronously pumped by a single ultrafast laser for efficient intracavity signal amplification and output power enhancement. By deploying two identical MgO:PPLN crystals in a single standing-wave cavity, and two pump pulse trains of similar average power from the same Kerr-lens-mode-locked Ti:sapphire laser, a minimum enhancement of 56% in the extracted signal power is achieved, with un-optimized output coupling, when temporal synchronization between the two intracavity signal pulse trains is established, resulting in a corresponding enhancement of 49% in pump depletion. Using intracavity dispersion control, near-transform-limited signal pulses with clean spectrum are obtained.

Antiresonant ring output-coupled continuous-wave optical parametric oscillator.

We demonstrate the successful deployment of an antiresonant ring (ARR) interferometer for the attainment of optimum output coupling in a continuous-wave (cw) optical parametric oscillator (OPO). The cw OPO, configured as a singly-resonant oscillator (SRO), is based on a 50-mm-long MgO:PPLN crystal and pumped by cw Ytterbium-fiber laser at 1064 nm, with the ARR interferometer integrated into one arm of the standing-wave cavity. By fine adjustment of the ARR transmission, a continuously variable signal output coupling from 0.8% to 7.3% has been achieved, providing optimum output coupling for signal and optimum power extraction for the idler, at different input pumping levels. The experimental results are compared with theoretical calculations for conventional output-coupled cw SRO, and the study shows that by reducing the insertion loss of the ARR elements, the performance of the ARR-coupled cw SRO can be further enhanced. We also show that the use of the ARR does not lead to any degradation in the cw SRO output beam quality. The proof-of-principle demonstration confirms the effectiveness of the technique for continuous, in situ, and fine control of output coupling in cw OPOs to achieve maximum output power at any arbitrary pumping level above threshold.

Synchronized retroreflection-pumped femtosecond optical parametric oscillator.

We report a flexible technique for threshold reduction and output power enhancement in synchronously pumped optical parametric oscillators (SPOPOs) based on synchronized retroreflection of the undepleted pump using a collimating system and a delay line, which allows easy and independent adjustment of the spatial and temporal overlap of the retroreflected beam in the nonlinear crystal. The method permits initial synchronization of the forward and retroreflected pump by interferometry, providing threshold reduction before oscillation is initiated. We demonstrate the technique in a femtosecond SPOPO based on BiB3O6, where a threshold reduction of 22% and an output power enhancement of 70% are achieved compared with single-pass pumping, with no detrimental effect on the spectral and temporal characteristics of the output pulses.

High-average-power, carrier-envelope phase-stable, few-cycle pulses at 2.1 µm from a collinear BiB3O6 optical parametric amplifier.

We generate self-carrier-to-envelope phase-stable, 630 µJ pulses, centered at 2.1 µm, with 42 fs (6 cycle) duration based on collinear optical parametric amplification in BiB(3)O(6) at 3 kHz. These pulses are generated through a traveling wave amplifier scheme, and the bandwidth supports 28 fs (4 cycle) pulse duration. Carrier-to-envelope phase stability was measured to be 410 mrad over 10 min or 260 mrad over 35 s.

Frequency-modulation-mode-locked optical parametric oscillator.

We demonstrate a novel technique for the generation of mode-locked pulses from a continuous-wave (cw) optical parametric oscillator (OPO). The technique is based on the deployment of a phase modulator in combination with an antiresonant ring interferometer internal to a cw OPO, simultaneously providing spectral broadening and phase-to-amplitude feedback modulation. The scheme is implemented in a doubly-resonant cw OPO based on MgO:sPPLT, configured in a standing-wave cavity and pumped at 532 nm. With the phase modulator activated and the cavity length synchronized, a stable train of 800 ps pulses is generated at a repetition rate of 160 MHz. Using single-pass second harmonic generation (SHG) of the OPO output, we observe a four times enhancement in SHG compared with cw operation, confirming the real achievement of energy concentration as a result of mode-locked operation.

Broadband, rapidly tunable Ti:sapphire-pumped BiB3O6 femtosecond optical parametric oscillator.

We report a femtosecond optical parametric oscillator (OPO) based on the nonlinear material BiB3O6 (BIBO) pumped directly by a Kerr lens mode-locked Ti:sapphire laser. Using a 1.5 mm long BIBO crystal cut at θ=11.4° for collinear type I (e→o+o) phase matching in the xz optical plane, femtosecond signal pulses across 1.4-1.6 µm, and idler pulses across 1.6-1.87 µm spectral range are generated, limited by the reflectivity bandwidth of the OPO mirrors. The high nonlinear gain and large spectral acceptance for type I interaction in the xz plane of BIBO permit rapid and continuous tuning across the entire range by simple fine adjustment of OPO cavity delay or through small changes in the pump wavelength, without varying any other parameters. Additionally, owing to the near-zero group velocity mismatch and dispersion, the OPO supports broad spectrum as wide as 33 nm, which results in self-compressed signal pulses. For 150 fs pump pulses, signal pulses with durations down to 106 fs with a time-bandwidth product of 0.48 are obtained without the need for intracavity dispersion compensation.

Interferometric output coupling of ring optical oscillators.

We demonstrate the successful deployment of an antiresonant ring (ARR) interferometer within a ring optical resonator and its use for absolute optimization of output power. The integration of the ARR interferometer in a folded arm of the ring oscillator provides continuously variable output coupling over broad spectral range and under any operating conditions. We demonstrate the technique using a picosecond optical parametric oscillator (OPO), where we show continuously adjustable output coupling and optimization of the output power for different pump power conditions, from 3.5 W to 13.5 W. By operating the OPO under an optimized output coupling at 14 W of pump power, we obtain >5 W of extracted signal power, more than 2.6 times that with a ~5% conventional output coupler. We also show that the inclusion of the ARR interferometer has no detrimental effect on the spatial, temporal, and spectral characteristics of OPO output.

Efficient, high-power, ytterbium-fiber-laser-pumped picosecond optical parametric oscillator.

We report a high-power picosecond optical parametric oscillator (OPO) synchronously pumped by a Yb fiber laser at 1.064 µm, providing 11.7 W of total average power in the near to mid-IR at 73% extraction efficiency. The OPO, based on a 50 mm MgO:PPLN crystal, is pumped by 20.8 ps pulses at 81.1 MHz and can simultaneously deliver 7.1 W of signal at 1.56 µm and 4.6 W of idler at 3.33 µm for 16 W of pump power. The oscillator has a threshold of 740 mW, with maximum signal power of 7.4 W at 1.47 µm and idler power of 4.9 W at 3.08 µm at slope efficiencies of 51% and 31%, respectively. Wavelength coverage across 1.43-1.63 µm (signal) and 4.16-3.06 µm (idler) is obtained, with a total power of ~11 W and an extraction efficiency of ~68%, with pump depletion of ~78% maintained over most of the tuning range. The signal and idler output have a single-mode spatial profile and a peak-to-peak power stability of ±1.8% and ±2.9% over 1 h at the highest power, respectively. A signal pulse duration of 17.3 ps with a clean single-peak spectrum results in a time-bandwidth product of ~1.72, more than four times below the input pump pulses.

Optimum output coupling in optical oscillators using an antiresonant ring interferometer.

We describe a simple and universal method for absolute optimization of output power from optical oscillators using interferometry. By incorporating an antiresonant ring interferometer in one arm of the oscillator cavity, simple adjustments to the interferometer provide continuously variable output coupling over a broad spectral range and under any operating conditions. We demonstrate the technique using a femtosecond optical parametric oscillator (OPO), where we show continuously adjustable output coupling from 1% to 60%. By operating the OPO under an optimized output coupling of approximately 30%, we obtain approximately 200 mW of extracted power, more than twice that with an approximately 4% conventional output coupler, across the full tuning range. We also show that the technique has no detrimental effect on the spatiotemporal characteristics of the output, with the extracted signal exhibiting a Gaussian beam profile and near-transform-limited pulse durations.

High-harmonic-repetition-rate, 1 GHz femtosecond optical parametric oscillator pumped by a 76 MHz Ti:sapphire laser.

We demonstrate the generation of femtosecond pulses in a synchronously pumped optical parametric oscillator (SPOPO) at the harmonics of pump repetition rate using a SPOPO cavity longer than the fundamental synchronous length. The SPOPO is based on a 1 mm crystal of periodically poled LiNbO(3) and pumped by a Kerr-lens mode-locked Ti:sapphire laser at 76 MHz. By increasing the SPOPO synchronous cavity length we have generated output signal pulses at successive harmonics of the pump repetition rate up to the 13th harmonic at 988 MHz, where average signal powers of 30 mW are still available for 1.45 W of pump power. The generated signal pulses at 988 MHz are near transform limited with average durations of 227 fs and a time-bandwidth product of 0.41 for 185 fs input pump pulses.

Efficient, high-repetition-rate, femtosecond optical parametric oscillator tunable in the red.

We report efficient generation of tunable femtosecond pulses in the red by internal frequency doubling of an optical parametric oscillator (OPO) based on periodically poled LiNbO3 (PPLN). The OPO, based on a 1-mm-thick PPLN crystal, is synchronously pumped by a femtosecond Ti:sapphire laser at 810 nm, providing signal pulses across 1.33-1.57 microm at a 76 MHz repetition rate. Using a 1-mm-thick crystal of BiB3O6 (BIBO) internal to the OPO cavity, we achieve frequency doubling of signal pulses across 665-785 nm with up to 260 mW of average power for 1.51 W of pump. The high nonlinear gain and phase-matching acceptance in PPLN and BIBO permit convenient tuning across the full range by simple detuning of OPO cavity delay. Intracavity dispersion compensation results in near-transform-limited red pulses with durations down to 140 fs for 185 fs input pump pulses.

Tunable, high-repetition-rate, femtosecond pulse generation in the ultraviolet.

We report efficient generation of tunable femtosecond pulses in the ultraviolet (UV) by intracavity doubling of a visible femtosecond optical parametric oscillator (OPO). The OPO, based on a 400 microm BiB3O6 crystal and pumped at 415 nm in the blue, can provide visible femtosecond signal pulses across 500-710 nm. Using a 500 microm crystal of beta-BaB2O4 internal to the OPO cavity, efficient frequency doubling of the signal pulses into the UV is achieved, providing tunable femtosecond pulses across 250-355 nm with up to 225 mW of average power at 76 MHz. Cross-correlation measurements result in UV pulses with durations down to 132 fs for 180 fs blue pump pulses.

BiB3O6 femtosecond optical parametric oscillator.

We report a femtosecond optical parametric oscillator (OPO) based on the nonlinear material BiB3O6. The OPO is synchronously pumped in the blue by the second harmonic of a Kerr-lens-mode-locked Ti:sapphire laser. It can provide wide and continuous tuning across the entire green-yellow-orange-red spectral range with a single crystal and a single set of mirrors. Using a 500 microm BiB3O6 crystal and collinear type I (e+e->o) phase matching in the optical yz plane, a signal wavelength range of 480-710 nm is demonstrated with angle tuning at room temperature at average output powers of 270 mW. With 220 fs blue pump pulses, near-transform-limited signal pulses of 120 fs duration have been obtained at 76 MHz repetition rate.

Controlled observation of a nonequilibrium Ising-Bloch transition in a nonlinear optical cavity.

We report the controlled observation of the nonequilibrium Ising-Bloch transition in a broad area nonlinear optical cavity (a quasi-1D single longitudinal-mode photorefractive oscillator in a degenerate four-wave mixing configuration). Our experimental technique allows for the controlled injection of the domain walls. We use cavity detuning as control parameter and find that both Ising and Bloch walls can exist for the same detuning values within a certain interval of detunings; i.e., the Ising-Bloch transition is hysteretic in our case. A complex Ginzburg-Landau model is used for supporting the observations.

Endocarditis sobre cable de marcapasos por Staphylococcus schleiferi / Staphylococcus schleiferi endocarditis related to pacemaker leads

No disponible