Desenvolvimento e Caracterização de Nanopartículas de D, L-PLA contendo Cefoxitina / Development and Characterization of Cefoxitin Loaded D, L-PLA Nanoparticles

As nanopartículas de D, L-PLA (PLA) contendo cefoxitina (CEF) foram preparadas pelo método de emulsão múltipla / evaporação do solvente. As partículas foram avaliadas em relação à morfologia, à eficiência de encapsulação, às interações polímero-fármaco, bem como à cinética de liberação do fármaco in vitro . As nanopartículas são esféricas e isoladas, com um diâmetro médio de cerca de 600 nm. O comportamento térmico (DSC) das nanopartículas contendo CEF sugeriu que o fármaco está disperso em um nível molecular dentro do sistema. A eficiência de encapsulação do fármaco no sistema quando a concentração de CEF é 30 mg / mL foi de 5,5%, determinada após a extração de fármaco, através de um método de HPLC validado. Esta baixa eficiência de encapsulação é compreensível, uma vez que a CEF é altamente hidrofílica. Os ensaios in vitro mostraram um perfil de liberação do fármaco a partir das nanopartículas fortemente sustentado e com uma cinética de difusão Fickiana pura.

Nanoparticles containing cefoxitin (CEF) made of D,L-PLA (PLA) were designed by a multiple emulsion/solvent evaporation method. The particles were extensively evaluated in relation to morphology, encapsulation efficiency, drug-polymer interactions as well as in vitro drug release kinetics. Nanoparticles were spherical in shape and isolated, with a mean diameter of about 600 nm. The thermal behaviour (DSC) of CEF-containing nanoparticles suggested that the drug was dispersed at a molecular level within the system. The drug encapsulation efficiency in the system for a CEF concentration of 30 mg/mL was 5.5%, as assessed after the drug extraction, by a validated HPLC method. This low encapsulation efficiency is understandable, since CEF is highly hydrophilic. The in vitro assays showed a strong sustained drug release profile from the nanoparticles with kinetics following pure Fickian diffusion.

Modeling a system of phosphated cross-linked high amylose for controlled drug release. Part 2: physical parameters, cross-linking degrees and drug delivery relationships.

High amylose cross-linked to different degrees with sodium trimetaphosphate by varying base strength (2% or 4%) and contact time (0.5-4h) was evaluated as non-compacted systems for sodium diclophenac controlled release. The physical properties and the performance of these products for sodium diclophenac controlled release from non-compacted systems were related to the structures generated at each cross-linking degree. For samples at 2% until 2h the swelling ability, G' and eta* values increased with the cross-linking degree, because the longer polymer chains became progressively more entangled and linked. This increases water uptake and holding, favoring the swelling and resulting in systems with higher viscosities. Additionally, the increase of cross-linking degree should contribute for a more elastic structure. The shorter chains with more inter-linkages formed at higher cross-linking degrees (2%4h and 4%) make water caption and holding difficult, decreasing the swelling, viscosity and elasticity. For 2% samples, the longer drug release time exhibited for 2%4h sample indicates that the increase of swelling and viscosity contribute for a more sustained drug release, but the mesh size of the polymeric network seems to be determinant for the attachment of drug molecules. For the 4% samples, smaller meshes size should determine less sustained release of drug.

Praziquantel-loaded PLGA nanoparticles: preparation and characterization.

Nanoparticles containing praziquantel made of poly (D,L-lactide-co-glycolide) were designed by an emulsion-solvent evaporation method. Two organic solvents were separately utilized as disperse phase: methylene chloride and ethyl acetate. The size of the particles prepared with the former solvent was bigger than the particles prepared with the latter. The entrapment efficiency was bigger when methylene chloride was used, 79.82% in comparison with 29.27% by using ethyl acetate. DSC and infrared studies showed that no strong chemical interaction between drug and polymer occurred. Release kinetics of praziquantel, used as a model drug, was governed not only by actual drug loading but also by particles size. The higher the drug content and the smaller the particle size resulted in faster drug release.

Determination of calcium by atomic absorption spectrophometry applied to the preparation of alginate: chitosan complexes

Polysaccharides, as alginate and chitosan, have been used to obtain modified release dosage forms. Alginate, due to its porperty of building gels during complex formation with calcium ions, allows the building of capsules containing a core constituted by calcium alginate. This work had for objective to determine the appropriate calcium concentration for the preparation of alginate-chitosan capsules, by means of calcium quantification using atomic absorption spectrophotometry. The methodology of calcium quantification was validated through analysis of the limit of detection, precision, accuracy and recovery of the method. The capsules, containing or not the drug, were prepared by the complex coacervation/ionotropic gelification method. Calcium was quantified after samples mineralization and dilution in lantanium solution. The results showed that the amount of calcium incorporated into the capsules depends on the amount of calcium added to the medium, and this ratio increases until the concentration of 1,5% of initial calcium chloride and above this concentration there is a decrease in the proportion of calcium bonded. It was observed that the proportion of calcium that links to the polymer is inversely proportional to the amount of calcium added. The calcium amount incorporated depends on the concentration of the polymeeric dispersions used as well as on the between the two polymers

Microspheres of alginate-chitosan containing isoniazid.

Isoniazid was encapsulated into microspheres of alginate-chitosan by means of a complex coacervation method in an emulsion system. Since the encapsulation of isoniazid tends to be limited by its hydrophilic characteristics, this study proposes its microencapsulation by adsorption. The particles were prepared in three steps: (1) preparation of a W/O emulsion; (2) phase separation; and (3) adsorption of the drug. The isolated particles were placed in a solution of the drug under stirring to allow adsorption. The morphology and particle size were analysed by scanning electron microscopy (SEM). The isoniazid content was determined by extraction in 1 M phosphate buffer pH 7.5 under stirring for 4 h. Finally, the samples were filtered and analysed in an UV/VIS spectrophotometer at 260 nm. In vitro release tests were carried out in 0.05 M phosphate buffer pH 7.5. The results showed that microspheres of alginate-chitosan obtained were of spherical shape. The emulsion used for microparticle formation allows the preparation of particles with a narrow size distribution. The adsorption observed is probably of chemical nature, i.e. there is an ionic interaction between the drug and the surface of the particles.

Analise das caracteristicas fisicas e fisico-quimicas de globulos inertes de diferentes origens / Physical and physical-chemical analysis of inert globules of diferent origins

Considering some important characteristics such as weight, quantity of globules per gram, surface area, hardness, solubility in 90.GL alcohol, time of dissolution in water at 37.C, and power of absorption, two batches of number 5 type inert globules, one of wich of national amking and the otherof French origin, were assayed. The results obtained showed significant differences between the products studied and auggest apossible influence in the efficacy of the final homeopathic medicament