[FeFe]-Hydrogenase Mimetic Metallopolymers with Enhanced Catalytic Activity for Hydrogen Production in Water.

Electrocatalytic [FeFe]-hydrogenase mimics for the hydrogen evolution reaction (HER) generally suffer from low activity, high overpotential, aggregation, oxygen sensitivity, and low solubility in water. By using atom-transfer radical polymerization (ATRP), a new class of [FeFe]-metallopolymers with precise molar mass, defined composition, and low polydispersity, has been prepared. The synthetic methodology introduced here allows facile variation of polymer composition to optimize the [FeFe] solubility, activity, and long-term chemical and aerobic stability. Water soluble functional metallopolymers facilitate electrocatalytic hydrogen production in neutral water with loadings as low as 2 ppm and operate at rates an order of magnitude faster than hydrogenases (2.5×105  s-1 ), and with low overpotential requirement. Furthermore, unlike the hydrogenases, these systems are insensitive to oxygen during catalysis, with turnover numbers on the order of 40 000 under both anaerobic and aerobic conditions.

Macromolecular Engineering of the Outer Coordination Sphere of [2Fe-2S] Metallopolymers to Enhance Catalytic Activity for H2 Production.

Small-molecule catalysts inspired by the active sites of [FeFe]-hydrogenase enzymes have long struggled to achieve fast rates of hydrogen evolution, long-term stability, water solubility, and oxygen compatibility. We profoundly improved on these deficiencies by grafting polymers from a metalloinitiator containing a [2Fe-2S] moiety to form water-soluble poly(2-dimethylamino)ethyl methacrylate metallopolymers (PDMAEMA-g-[2Fe-2S]) using atom transfer radical polymerization (ATRP). This study illustrates the critical role of the polymer composition in enhancing hydrogen evolution and aerobic stability by comparing the catalytic activity of PDMAEMA-g-[2Fe-2S] with a nonionic water-soluble metallopolymer based on poly(oligo(ethylene glycol) methacrylate) prepared via ATRP (POEGMA-g-[2Fe-2S]) with the same [2Fe-2S] metalloinitiator. Additionally, the tunability of catalyst activity is demonstrated by the synthesis of metallocopolymers incorporating the 2-(dimethylamino)ethyl methacrylate (DMAEMA) and oligo(ethylene glycol) methacrylate (OEGMA) monomers. Electrochemical investigations into these metallo(co)polymers show that PDMAEMA-g-[2Fe-2S] retains complete aerobic stability with catalytic current densities in excess of 20 mA·cm-2, while POEGMA-g-[2Fe-2S] fails to reach 1 mA·cm-2 current density even with the application of high overpotentials (η > 0.8 V) and loses all activity in the presence of oxygen. Random copolymers of the two monomers polymerized with the same [2Fe-2S] initiator showed intermediate activity in terms of current density, overpotential, and aerobic stability.

Nickel Complexes of C-Substituted Cyclams and Their Activity for CO2 and H+ Reduction.

Several nickel(II) complexes of cyclams bearing aryl groups on the carbon backbone were prepared and evaluated for their propensity to catalyze the electrochemical reduction of CO2 to CO and/or H+ to H2, representing the first catalytic analysis to be performed on an aryl-cyclam metal complex. Cyclic voltammetry (CV) revealed the attenuation of catalytic activity when the aryl group bears the strong electron-withdrawing trifluoromethyl substituent, whereas the phenyl, p-tolyl, and aryl-free derivatives displayed a range of catalytic activities. The gaseous-product distribution for the active complexes was determined by means of controlled-potential electrolysis (CPE) and revealed that the phenyl derivative is the most active as well as the most selective for CO2 reduction over proton reduction. Stark differences in the activity of the complexes studied are rationalized through comparison of their X-ray structures, absorption spectra, and CPE profiles. Further CV studies on the phenyl derivative were undertaken to provide a kinetic insight.

Intramolecular electron transfer in bipyridinium disulfides.

Reductive cleavage of disulfide bonds is an important step in many biological and chemical processes. Whether cleavage occurs stepwise or concertedly with electron transfer is of interest. Also of interest is whether the disulfide bond is reduced directly by intermolecular electron transfer from an external reducing agent or mediated intramolecularly by internal electron transfer from another redox-active moiety elsewhere within the molecule. The electrochemical reductions of 4,4'-bipyridyl-3,3'-disulfide (1) and the di-N-methylated derivative (2(2+)) have been studied in acetonitrile. Simulations of the cyclic voltammograms in combination with DFT (density functional theory) computations provide a consistent model of the reductive processes. Compound 1 undergoes reduction directly at the disulfide moiety with a substantially more negative potential for the first electron than for the second electron, resulting in an overall two-electron reduction and rapid cleavage of the S-S bond to form the dithiolate. In contrast, compound 2(2+) is reduced at less negative potential than 1 and at the dimethyl bipyridinium moiety rather than at the disulfide moiety. Most interesting, the second reduction of the bipyridinium moiety results in a fast and reversible intramolecular two-electron transfer to reduce the disulfide moiety and form the dithiolate. Thus, the redox-active bipyridinium moiety provides a low energy pathway for reductive cleavage of the S-S bond that avoids the highly negative potential for the first direct electron reduction. Following the intramolecular two-electron transfer and cleavage of the S-S bond the bipyridinium undergoes two additional reversible reductions at more negative potentials.

Synthesis and electrochemical reactivity of molybdenum dicarbonyl supported by a redox-active α-diimine ligand.

Low-valent molybdenum dicarbonyl complexes with a diazabutadiene [(mes)DAB(R); [ArN═C(R)C(R)═NAr]; Ar = 2,4,6-trimethylphenyl (mes), R = H or CH3] ligand have been synthesized and fully characterized. The title complexes exhibit elongated DAB C-N and shortened C-C bond lengths over the free ligand and other zerovalent molybdenum complexes of DAB. Compared to known examples theoretically described as iminato π-radicals (L(•-)), the oxidation state assignment fits a molybdenum(II) description. However, Mo K-edge X-ray absorption spectroscopy indicates that the complexes are best described as molybdenum(0). This example demonstrates that caution should be exercised in assigning the oxidation state based on structural parameters alone. Cyclic voltammetry studies reveal an electrochemical-chemical process that has been identified by in situ Fourier transform infrared spectroelectrochemistry as cis-to-trans isomerization.

Reinvestigation of a former concerted proton-electron transfer (CPET), the reduction of a hydrogen-bonded complex between a proton donor and the anion radical of 3,5-di-tert-butyl-1,2-benzoquinone.

In 2001, Lehmann and Evans (J. Phys. Chem. B, 2001, 105, 8877-8884) reported that the electrochemical reduction of a hydrogen-bonded complex between a proton donor and the anion radical of 3,5-di-tert-butyl-1,2-benzoquinone in acetonitrile proceeded by a concerted proton-electron transfer (CPET) reaction in which electron transfer from the electrode and proton transfer from proton donor to the quinone moiety occurred concertedly. Support for this conclusion was based upon ruling out both of the competing two-step processes, electron transfer followed by proton transfer (EP) and proton transfer followed by electron transfer (PE). In the course of studies of related compounds it was decided to reinvestigate the reduction of 3,5-di-tert-butyl-1,2-benzoquinone. It was discovered that the earlier conclusion that a CPET reaction was occurring was tenable only for the particular electrolyte that was used, tetrabutylammonium hexafluorophosphate and for lower concentrations of the quinone. Even the small change of carrying out the reduction of the quinone in the presence of water with tetramethylammonium hexafluorophosphate as electrolyte, produced voltammograms with clear signatures that the process was EP rather than CPET. Even more dramatic effects were seen with cesium, potassium or sodium ions in the electrolyte. A general reaction scheme to explain results with all electrolytes will be presented.

Electronic and geometric effects of phosphatriazaadamantane ligands on the catalytic activity of an [FeFe] hydrogenase inspired complex.

The [FeFe] hydrogenase enzyme active site inspired complexes [Fe(2)(mu-C(6)H(4)S(2))(CO)(5)PTA] (1PTA) and [Fe(2)(mu-C(6)H(4)S(2))(CO)(4)PTA(2)] (1PTA(2)) (PTA = 1,3,5-triaza-7-phosphaadamantane) were synthesized and characterized. The ability of 1PTA and 1PTA(2) to catalytically produce molecular hydrogen in solution from the weak acid acetic acid was examined electrochemically and compared to previous studies on the all carbonyl containing analogue [Fe(2)(mu-C(6)H(4)S(2))(CO)(6)] (1). Computational methods and cyclic voltammograms indicated that the substitution of CO ligands by PTA in 1 resulted in markedly different reduction chemistry. Both 1PTA and 1PTA(2) catalytically produce molecular hydrogen from acetic acid, however, the mechanism by which and 1PTA and 1PTA(2) catalyze hydrogen differ in the initial reductive processes.

Electrochemical and chemical oxidation of dithia-, diselena-, ditellura-, selenathia-, and tellurathiamesocycles and stability of the oxidized species.

The diverse electrochemical and chemical oxidations of dichalcogena-mesocycles are analyzed, broadening our understanding of the chemistry of the corresponding radical cations and dications. 1,5-Diselenocane and 1,5-ditellurocane undergo reversible two-electron oxidation with inverted potentials analogous to 1,5-dithiocane. On the other hand, 1,5-selenathiocane and 1,5-tellurathiocane undergo one-electron oxidative dimerization. The X-ray crystal structures of the Se-Se dimer of the 1,5-selenathiocane one-electron oxidized product and the monomeric two-electron oxidized product (dication) of 1,5-tellurathiocane are reported. 1,5-Dithiocanes and 1,5-diselenocanes with group 14 atoms as ring members undergo irreversible oxidation, unlike the reversible two-electron oxidation of the corresponding silicon-containing 1,5-ditellurocanes. These results demonstrate the chemical consequences of the dication stabilities Te(+)-Te(+) > Se(+)-Se(+) > S(+)-S(+), as well as Se(+)-Se(+) > Se(+)-S(+) and Te(+)-Te(+) > Te(+)-S(+).

On the causes of potential inversion in 1,2,4,5-tetrakis(amino)benzenes.

Three 3,6-difluoro-1,2,4,5-tetrakis(amino)benzene compounds, bearing dimethylamino (1), piperidin-1-yl (3), or morpholin-1-yl (5) substituents, have been synthesized and subsequently defluorinated to give the corresponding 1,2,4,5-tetrakis(amino)benzene compounds 2, 4, and 6; the crystal structures of compounds 1, 4, and 6 have been obtained. Cyclic voltammetry shows that all six compounds will lose two electrons to form dications, and the use of suitable oxidizing agents has allowed isolation and crystallographic characterization of the dications 2(2+) and 6(2+) (as [PF(6)](2) salts) and 4(2+) (as a [I(5)][I(3)] salt). The separation DeltaE between the loss of the first electron and the second varies between compounds, from 0.23 V in 1 to 0.01 V in 6. Electrochemical studies involving the use of the noncoordinating electrolyte [Bu(4)N][B{C(6)H(3)(CF(3))(2)}(4)] show that it is possible to increase this separation, stabilizing the intermediate monocationic phase, and this has allowed the isolation and crystallographic characterization of the radical salts 2[B{C(6)H(3)(CF(3))(2)}(4)] and 4[B{C(6)H(3)(CF(3))(2)}(4)], the first radical cations of this family to be isolated. DFT studies of the ion pairing between oxidized forms of 1 and 2 and anions imply that the location of the ion pairing is different in the two species.

One- to two-electron reduction of an [FeFe]-hydrogenase active site mimic: the critical role of fluxionality of the [2Fe2S] core.

The one- to two-electron reduction of mu-(1,2-ethanedithiolato)diironhexacarbonyl that has been observed under electrochemical conditions is dependent on scan rate and temperature, suggesting activation of a structural rearrangement. This structural rearrangement is attributed to fluxionality of the [2Fe2S] core in the initially formed anion. Computations support this assessment. Upon an initial one-electron reduction, the inherent fluxionality of the [2Fe2S] complex anion allows for a second one-electron reduction at a less negative potential to form a dianionic species. The structure of this dianion is characterized by a rotated iron center, a bridging carbonyl ligand, and, most significantly, a dissociated Fe-S bond. This fluxionality of the [2Fe2S] core upon reduction has direct implications for the chemistry of [FeFe]-hydrogenase mimics and for iron-sulfur cluster chemistry in general.

Insights into the Nature of Mo(V) Species in Solution: Modeling Catalytic Cycles for Molybdenum Enzymes.

The tris(pyrazolyl)borate and related tripodal N-donor ligands originally developed by Trofimenko stabilize mononuclear compounds containing Mo(VI)O(2), Mo(VI)O, Mo(V)O, and Mo(IV)O units and effectively inhibit their polynucleation in organic solvents. Dioxo-Mo(VI) complexes of the type LMoO(2)(SPh), where L = hydrotris(3,5-dimethylpyrazol-1-yl)borate (Tp*), hydrotris(3-isopropylpyrazol-1-yl)borate (Tp(i) (Pr)), and hydrotris(3,5-dimethyl-1,2,4-triazol-1-yl)borate (Tz) and related derivatives are the only model systems that mimic the complete reaction sequence of sulfite oxidase, in which oxygen from water is ultimately incorporated into product. The quasi-reversible, one-electron reduction of Tp*MoO(2)(SPh) in acetonitrile exhibits a positive potential shift upon addition of a hydroxylic proton donor, and the magnitude of the shift correlates with the acidity of the proton donor. These reductions produce two Mo(V) species, [Tp*Mo(V)O(2)(SPh)](-) and Tp*Mo(V)O(OH)(SPh), that are related by protonation. Measurement of the relative amounts of these two Mo(V) species by EPR spectroscopy enabled the pK(a) of the Mo(V)(OH) unit in acetonitrile to be determined and showed it to be several pK(a) units smaller than that for water in acetonitrile. Similar electrochemical-EPR experiments for Tp(i) (Pr)MoO(2)(SPh) indicated that the pK(a) for its Mo(V)(OH) unit was ∼1.7 units smaller than that for Tp*Mo(V)O(OH)(SPh). Density functional theory calculations also predict a smaller pK(a) for (iPr)Mo(V)O(OH)(SPh) compared to Tp*Mo(V)O(OH)(SPh). Analysis of these results indicates that coupled electron-proton transfer (CEPT) is thermodynamically favored over the indirect process of metal reduction followed by protonation. The crystal structure of Tp(i) (Pr)MoO(2)(SPh) is also presented.

Cluster carbonyls of the [Re(6)(mu(3)-Se)(8)](2+) core: synthesis, structural characterization, and computational analysis.

The reactions of the previously reported cluster complexes [Re(6)(mu(3)-Se)(8)(PEt(3))(5)I]I, trans-[Re(6)(mu(3)-Se)(8)(PEt(3))(4)I(2)], and cis-[Re(6)(mu(3)-Se)(8)(PEt(3))(4)I(2)] with the [Re(6)(mu(3)-Se)(8)](2+) core with CO in the presence of AgSbF(6) afforded the corresponding cluster carbonyls [Re(6)(mu(3)-Se)(8)(PEt(3))(5)(CO)][SbF(6)](2) (), trans-[Re(6)(mu(3)-Se)(8)(PEt(3))(4)(CO)(2)][SbF(6)](2) (), and cis-[Re(6)(mu(3)-Se)(8)(PEt(3))(4)(CO)(2)][SbF(6)](2) (). Infrared spectroscopy indicated weakening of the bond in CO, suggesting the existence of backbonding between the cluster core and the CO ligand(s). Electrochemical studies focusing on the reversible, one-electron oxidation of the cluster core revealed a large increase in the oxidation potential upon going from the acetonitrile derivatives to their carbonyl analogs, consistent with the depleted electron density of the cluster core upon CO ligation. Disparities between the IR spectra and oxidation potential between and indicate that electronic differences exist between sites trans and cis to the location of a ligand of interest. The active role played by the Se atoms in influencing the cluster-to-CO bonding interactions is suggested through this result and density functional (DF) computational analysis. The computations indicate that molecular orbitals near the HOMO account for backbonding interactions with a high percentage of participation of Se orbitals.

Alkylated trimethylene-bridged bis(p-phenylenediamines).

One and two electron oxidation of N,N',N'',N'''-tetramethyl-1,5,12,16-tetraaza[5,5]paracyclophane (Me3C), a bis-trimethylene bridged bis-p-phenylene diamine (PD), and its ethyl and isopropyl analogues are discussed. The monocation and dication are both stable, as demonstrated by optical studies that show they are in equilibrium in solution, with an especially small difference in first and second oxidation potentials for Me3C in MeCN (+23 to -20 mV, measured by simulation of the optical spectrum and of the cyclic voltammogram, respectively). The monocations have charge localized in one PD unit and show a Hush-type mixed valence transition between their PD0 and PD.+ groups. The dications Me3C2+ and Et3C2+ have optical spectra that appear to show large splittings between their PD.+ groups and have a weak ESR spectrum, and 1H NMR data show that the former is a ground-state singlet. iPr3C2+ has a very different optical spectrum and exhibits a triplet ESR spectrum at 120 K. X-ray crystal structures show that for Me3C0 the N(CH2)3N units on each side are in doubly anti (aa) conformations that put the aryl rings as far apart as possible, but Me3C2+ has doubly gg N(CH2)3N trimethylene bridges and both N,N and C,C distances between the PD.+ groups that are significantly below van der Walls contact. In contrast, iPr3C0 is in a doubly ag conformation, and its diradical dication is suggested to be a triplet because it does not attain the doubly gg conformation.

Hydrogen generation from weak acids: electrochemical and computational studies of a diiron hydrogenase mimic.

Extended investigation of electrocatalytic generation of dihydrogen using [(mu-1,2-benzenedithiolato)][Fe(CO)3]2 has revealed that weak acids, such as acetic acid, can be used. The catalytic reduction producing dihydrogen occurs at approximately -2 V for several carboxylic acids and phenols resulting in overpotentials of only -0.44 to -0.71 V depending on the weak acid used. This unusual catalytic reduction occurs at a potential at which the starting material, in the absence of a proton source, does not show a reduction peak. The mechanism for this process and structures for the intermediates have been discerned by electrochemical and computational analysis. These studies reveal that the catalyst is the monoanion of the starting material and an ECEC mechanism occurs.

Electron transfer and structural change: distinguishing concerted and two-step processes.

In electron-transfer reactions accompanied by structural changes, the structural change can be concerted with electron transfer or can occur in a separate reaction either preceding or following the electron-transfer step. In this paper we discuss ways of distinguishing concerted reactions from the latter two-step type. Included are recent examples in which no intermediates have been detected in the reactions, thus precluding the direct assignment to the two-step category. In these cases, other means are used to build support for the two-step mechanism with respect to the concerted process. These include an example of structural change preceding electron transfer, a demonstration that the current models of concerted reactions cannot fit the voltammetric data, and a case in which an independent measure of the inner reorganization energy was used to show that the reaction could not be a concerted electron transfer and structural change.

Modification of indium-tin oxide electrodes with thiophene copolymer thin films: optimizing electron transfer to solution probe molecules.

We describe the modification of indium-tin oxide (ITO) electrodes via the chemisorption and electropolymerization of 6-{2,3-dihydrothieno[3,4-b]-1.4-dioxyn-2-yl methoxy}hexanoic acid (EDOTCA) and the electrochemical co-polymerization of 3,4-ethylenedioxythiophene (EDOT) and EDOTCA to form ultrathin films that optimize electron-transfer rates to solution probe molecules. ITO electrodes were first activated using brief exposure to strong haloacids, to remove the top approximately 8 nm of the electrode surface, followed by immediate immersion into a 50:50 EDOT/EDOTCA co-monomer solution. Potential step electrodeposition for brief deposition times was used to grow copolymer films of thickness 10-100 nm. The composition of these copolymer films was characterized by solution depletion studies of the monomers and atomic force microscopy (AFM), X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy (reflection-absorption infrared spectroscopy (RAIRS)) of the product films. The spectroscopic data suggest that the composition of the copolymer approaches 80% EDOTCA when electropolymerization occurs from concentrated (10 mM) solutions. AFM characterization shows that electrodeposited poly(EDOT)/poly(EDOTCA) (PEDOT/PEDOTCA) films are quite smooth, with texturing on the nanometer scale. RAIRS studies indicate that these films consist of a combination of EDOTCA units with noninteracting -COOH groups and adjacent hydrogen-bonded -COOH groups. The EDOTCA-containing polymer chains appear to grow as columnar clusters from specific regions, oriented nearly vertically to the substrate plane. As they grow, these columnar clusters overlap to form a nearly continuous redox active polymer film. ITO activation and formation of these copolymer films enhances the electroactive fraction of the electrode surface relative to a nonactivated, unmodified "blocked" ITO electrode. Outer-sphere solution redox probes (dimethylferrocene) give standard rate coefficients, kS > or = 0.4 cm.s-1, at 10 nm thick copolymer films of PEDOT/PEDOTCA, which is 3 orders of magnitude greater than that on the unmodified ITO surface and approaches the values for kS seen on clean gold surfaces.

Quantitative evaluation of the mechanism of electroreduction of benzoyl cyanides.

The mechanism of reduction of benzoyl cyanide, 6, p-methoxybenzoyl cyanide, 7, and p-chlorobenzoyl cyanide, 8, has been studied in acetonitrile (6 and 7), N,N-dimethylformamide (6), and acetonitrile containing water (all three compounds). The reaction proceeds by initial reduction to form the anion radical followed by dimerization to produce an intermediate dianion, the dianion of the dicyanohydrin of benzil. The latter loses cyanide to give the anion of the monocyanohydrin of benzil, which undergoes two parallel reactions: expulsion of cyanide to give the corresponding benzil and rearrangement to the monoanion of mandelonitrile benzoate. The addition of water brings about an increase in the dimerization rate constant and an associated increase in the amount of benzil that is produced. The standard potentials for the initial reduction step have been evaluated, and their dependence on the substituent is discussed. The dimerization rate constants have also been evaluated.

Electron-transfer reactions with significant changes in structure. Unsymmetrical crowded ethylenes.

The electrochemical reduction mechanisms of xanthylideneanthrone, 6, thioxanthylideneanthrone, 7, 10-(diphenylmethylene)anthrone, 8, and 9-(diphenylmethylene)-9H-fluorene, 9, have been studied in dimethylformamide. The reduction of the first two compounds proceeds from folded forms of the neutral to twisted forms of the anion radical according to a square scheme. The data for reduction of 8 can be well accounted for by the same square scheme. However, one-step reduction with concerted electron transfer and structural change cannot be ruled out. Compound 9, whose fluorene ring system cannot fold, exists only in twisted forms in the neutral, anion radical, and dianion. Consequently, there are no major changes in structure upon reduction, and the compound is reduced in two reversible steps with the second complicated by rapid loss of the dianion that is probably due to protonation by components of the medium.

Studies of potential inversion in an extended tetrathiafulvalene.

Electrochemical oxidation of the extended tetrathiafulvalene 9,10-bis(1,3-dithiole-2-ylidene)-9,10-dihydroanthracene (2) was studied in N,N-dimethylformamide. A single, two-electron oxidation peak occurs, and on the return sweep of a cyclic voltammogram, a two-electron reduction peak is seen. The oxidation of 2 to its cation radical and dication occurs with potential inversion (i.e., removal of the second electron occurs more easily than removal of the first). The extent of potential inversion was estimated by cyclic voltammetry to be 0.28 V by analysis of the process in terms of concerted structural change and electron transfer. Failure to detect the cation radical by EPR of an equimolar mixture of neutral 2 and the dication is consistent with this value. The inner reorganization energy of the cation radical was determined by gas-phase photoelectron spectroscopy (PES) to be 0.31-0.35 eV. Calculations, consistent with earlier experimental data, show rather large changes in structure associated with the oxidation processes. These large structural changes contrast with the relatively small inner reorganization energy found by PES. This observation prompted an analysis of voltammetry in terms of two-step processes, with structural change either preceding or following electron transfer. Agreement of simulations based on this mechanism with experimental voltammograms was equally as good as with the concerted mechanism. Notably, the two-step mechanism produced more realistic values of the transfer coefficient and electron-transfer rate constant for the first step of oxidation.