Switchable changes in the conductance of single-walled carbon nanotube networks on exposure to water vapour.

We have discovered that wrapping single-walled carbon nanotubes (SWCNTs) with ionic surfactants induces a switch in the conductance-humidity behaviour of SWCNT networks. Residual cationic vs. anionic surfactant induces a respective increase or decrease in the measured conductance across the SWCNT networks when exposed to water vapour. The magnitude of this effect was found to be dependent on the thickness of the deposited SWCNT films. Previously, chemical sensors, field effect transistors (FETs) and transparent conductive films (TCFs) have been fabricated from aqueous dispersions of surfactant functionalised SWCNTs. The results reported here confirm that the electrical properties of such components, based on randomly orientated SWCNT networks, can be significantly altered by the presence of surfactant in the SWCNT layer. A mechanism for the observed behaviour is proposed based on electrical measurements, Raman and UV-Vis-NIR spectroscopy. Additionally, the potential for manipulating the sensitivity of the surfactant functionalised SWCNTs to water vapour for atmospheric humidity sensing was evaluated. The study also presents a simple method to establish the effectiveness of surfactant removal techniques, and highlights the importance of characterising the electrical properties of SWCNT-based devices in both dry and humid operating environments for practical applications.

Controlling the Cross-Sensitivity of Carbon Nanotube-Based Gas Sensors to Water Using Zeolites.

Carbon nanotube-based gas sensors can be used to detect harmful environmental pollutants such as NO2 at room temperature. Although they show promise as low-powered, sensitive, and affordable monitoring devices, cross-sensitivity of functionalized carbon nanotubes to water vapor often obscures the detection of target molecules. This is a barrier to adoption for monitoring of airborne pollutants because of the varying humidity levels found in real world environments. Zeolites, also known as molecular sieves because of their selective adsorption properties, are used in this work to control the cross-sensitivity of single-walled carbon nanotube (SWCNT)-based sensors to water vapor. Zeolites incorporated into the sensing layer are found to reduce interference effects that would otherwise obscure the identification of NO2 gas, permitting repeatable detection over a range of relative humidities. This significant improvement is found to depend on the arrangement of the SWCNT-zeolite layers in the sensing device, as well as the hydrophilicity of the chosen zeolite.