Evidence of increasing wildfire damage with decreasing property price in Southern California fires.

Across the Western United States, human development into the wildland urban interface (WUI) is contributing to increasing wildfire damage. Given that natural disasters often cause greater harm within socio-economically vulnerable groups, research is needed to explore the potential for disproportionate impacts associated with wildfire. Using Zillow Transaction and Assessment Database (ZTRAX), hereafter "Zillow", real estate data, we explored whether lower-priced structures were more likely to be damaged during the most destructive, recent wildfires in Southern California. Within fire perimeters occurring from 2000-2019, we matched property price data to burned and unburned structures. To be included in the final dataset, fire perimeters had to surround at least 25 burned and 25 unburned structures and have been sold at most seven years before the fire; five fires fit these criteria. We found evidence to support our hypothesis that lower-priced properties were more likely to be damaged, however, the likelihood of damage and the influence of property value significantly varied across individual fire perimeters. When considering fires individually, properties within two 2003 fires-the Cedar and Grand Prix-Old Fires-had statistically significantly decreasing burn damage with increasing property value. Occurring in 2007 and later, the other three fires (Witch-Poomacha, Thomas, and Woolsey) showed no significant relationship between price and damage. Consistent with other studies, topographic position, slope, elevation, and vegetation were also significantly associated with the likelihood of a structure being damaged during the wildfire. Driving time to the nearest fire station and previously identified fire hazard were also significant. Our results suggest that further studies on the extent and reason for disproportionate impacts of wildfire are needed. In the meantime, decision makers should consider allocating wildfire risk mitigation resources-such as fire-fighting and wildfire structural preparedness resources-to more socioeconomically vulnerable neighborhoods.

In vivo strain measurements in the human buttock during sitting using MR-based digital volume correlation.

Advancements in systems for prevention and management of pressure ulcers require a more detailed understanding of the complex response of soft tissues to compressive loads. This study aimed at quantifying the progressive deformation of the buttock based on 3D measurements of soft tissue displacements from MR scans of 10 healthy subjects in a semi-recumbent position. Measurements were obtained using digital volume correlation (DVC) and released as a public dataset. A first parametric optimisation of the global registration step aimed at aligning skeletal elements showed acceptable values of Dice coefficient (around 80%). A second parametric optimisation on the deformable registration method showed errors of 0.99mm and 1.78mm against two simulated fields with magnitude 7.30±3.15mm and 19.37±9.58mm, respectively, generated with a finite element model of the buttock under sitting loads. Measurements allowed the quantification of the slide of the gluteus maximus away from the ischial tuberosity (IT, average 13.74 mm) that was only qualitatively identified in the literature, highlighting the importance of the ischial bursa in allowing sliding. Spatial evolution of the maximus shear strain on a path from the IT to the seating interface showed a peak of compression in the fat, close to the interface with the muscle. Obtained peak values were above the proposed damage threshold in the literature. Results in the study showed the complexity of the deformation of the soft tissues in the buttock and the need for further investigations aimed at isolating factors such as tissue geometry, duration and extent of load, sitting posture and tissue properties.

Survey of practices for documenting evidence of bruises from physical abuse during child protection proceedings.

Accurate recording of forensically important information on bruises is vital in child protection proceedings (Royal College of Paediatrics and Child Health (RCPCH)). An online survey was distributed to the RCPCH child protection committees to assess compliance with guidance. 56 individuals were contacted by email, 47 (84%) completed the survey. Results showed that the paediatricians always or usually record size (n=41; 87%), site (n=45; 96%), shape (n=32; 68%) and colour (n=36; 77%); n=10; 22% of the paediatricians stated that they 'always' used a ranking system for likelihood of abuse; n=12; 35% of those surveyed 'sometimes' estimated the size of the bruise. Results showed that paediatric bruise reporting is inconsistent and incomplete for some fields compared with national guidance.

Ethics Inside the Black Box: Integrating Science and Technology Studies into Engineering and Public Policy Curricula.

There is growing need for hybrid curricula that integrate constructivist methods from Science and Technology Studies (STS) into both engineering and policy courses at the undergraduate and graduate levels. However, institutional and disciplinary barriers have made implementing such curricula difficult at many institutions. While several programs have recently been launched that mix technical training with consideration of "societal" or "ethical issues," these programs often lack a constructivist element, leaving newly-minted practitioners entering practical fields ill-equipped to unpack the politics of knowledge and technology or engage with skeptical publics. This paper presents a novel format for designing interdisciplinary coursework that combines conceptual content from STS with training in engineering and policy. Courses following this format would ideally be team taught by instructors with advanced training in diverse fields, and hence co-learning between instructors and disciplines is a key element of the format. Several instruments for facilitating both student and instructor collaborative learning are introduced. The format is also designed for versatility: in addition to being adaptable to both technical and policy training environments, topics are modularized around a conceptual core so that issues ranging from biotech to nuclear security can be incorporated to fit programmatic needs and resources.

Quantifying microcracks on fractured bone surfaces - Potential use in forensic anthropology.

Bone fracture surface morphology (FSM) can provide valuable information on the cause of failure in forensic and archaeological applications and it depends primarily on three factors, the loading conditions (like strain rate), the ambient conditions (wet or dry bone material) and the quality of bone material itself. The quality of bone material evidently changes in taphonomy as a result of the decomposition process and that in turn is expected to affect FSM. Porcine bones were fractured by a standardised impact during the course of soft tissue decomposition, at 28-day intervals, over 140 days (equivalent to 638 cooling degree days). Measurements of the associated microcracks on the fractured cortical bone surfaces indicated a progressive increase in mean length during decomposition from around 180 µm-375 µm. The morphology of these microcracks also altered, from multiple intersecting microcracks emanating from a central point at 0-28 cumulative cooling degree days, to longer linear cracks appearing to track lamellae as soft tissue decomposition progressed. The implications of these findings are that taphonomic changes of bone may offer the real possibility of distinguishing perimortem and taphonomic damage and also provide a new surrogate parameter for estimation of post-mortem interval (PMI) in forensics.

Fabrication of a positional brain shift phantom through the utilization of the frozen intermediate hydrogel state.

Synthetic models (phantoms) of the brain-skull system are useful tools for the study of surgical events that are otherwise difficult to study directly in humans. To date, very few studies can be found which replicate the full anatomical brain-skull system. Such models are required to study the more global mechanical events that can occur in neurosurgery, such as positional brain shift. Presented in this work is a novel workflow for the fabrication of a biofidelic brain-skull phantom which features a full hydrogel brain with fluid-filled ventricle/fissure spaces, elastomer dural septa and fluid-filled skull. Central to this workflow is the utilization of the frozen intermediate curing state of an established brain tissue surrogate, which allows for a novel moulding and skull installation approach that permits a much fuller recreation of the anatomy. The mechanical realism of the phantom was validated through indentation testing of the phantom's brain and simulation of the supine to prone brain shift event, while the geometric realism was validated through magnetic resonance imaging. The developed phantom captured a novel measurement of the supine to prone brain shift event with a magnitude that accurately reproduces that seen in the literature.

An analysis of the relationship between microneedle spacing, needle force and skin strain during the indentation phase prior to skin penetration.

Microneedle (MN) array patches present a promising new approach for the minimally invasive delivery of therapeutics and vaccines. However, ensuring reproducible insertion of MNs into the skin is challenging. The spacing and arrangement of MNs in an array are critical determinants of skin penetration and the mechanical integrity of the MNs. In this work, the finite element method was used to model the effect of MN spacing on needle reaction force and skin strain during the indentation phase prior to skin penetration. Spacings smaller than 2-3 mm (depending on variables, e.g., skin stretch) were found to significantly increase these parameters.

In vivo measurement of human brain material properties under quasi-static loading.

Computational modelling of the brain requires accurate representation of the tissues concerned. Mechanical testing has numerous challenges, in particular for low strain rates, like neurosurgery, where redistribution of fluid is biomechanically important. A finite-element (FE) model was generated in FEBio, incorporating a spring element/fluid-structure interaction representation of the pia-arachnoid complex (PAC). The model was loaded to represent gravity in prone and supine positions. Material parameter identification and sensitivity analysis were performed using statistical software, comparing the FE results to human in vivo measurements. Results for the brain Ogden parameters µ, α and k yielded values of 670 Pa, -19 and 148 kPa, supporting values reported in the literature. Values of the order of 1.2 MPa and 7.7 kPa were obtained for stiffness of the pia mater and out-of-plane tensile stiffness of the PAC, respectively. Positional brain shift was found to be non-rigid and largely driven by redistribution of fluid within the tissue. To the best of our knowledge, this is the first study using in vivo human data and gravitational loading in order to estimate the material properties of intracranial tissues. This model could now be applied to reduce the impact of positional brain shift in stereotactic neurosurgery.

Hurdles in responsive community engagement for the development of environmental biotechnologies.

Recent calls for engaging communities in biotechnology development do not draw enough attention to the hurdles that must be overcome for engagement strategies to effectively feed back into research design and conduct. These hurdles call into question many standard ways of operating and assessing in traditional scientific disciplines. The first steps in addressing these hurdles can be the most difficult. In reflecting on our own experiences in the early-stage development of environmental biotechnologies, we provide a set of techniques to help scientists and their collaborators learn to become more responsive to the needs and attitudes of communities with which they are engaging. Graphical Abstract.

A combined imaging, deformation and registration methodology for predicting respirator fitting.

N95/FFP3 respirators have been critical to protect healthcare workers and their patients from the transmission of COVID-19. However, these respirators are characterised by a limited range of size and geometry, which are often associated with fitting issues in particular sub-groups of gender and ethnicities. This study describes a novel methodology which combines magnetic resonance imaging (MRI) of a cohort of individuals (n = 8), with and without a respirator in-situ, and 3D registration algorithm which predicted the goodness of fit of the respirator. Sensitivity analysis was used to optimise a deformation value for the respirator-face interactions and corroborate with the soft tissue displacements estimated from the MRI images. An association between predicted respirator fitting and facial anthropometrics was then assessed for the cohort.

Recommendations for environmental risk assessment of gene drive applications for malaria vector control.

Building on an exercise that identified potential harms from simulated investigational releases of a population suppression gene drive for malaria vector control, a series of online workshops identified nine recommendations to advance future environmental risk assessment of gene drive applications.

iGEM and Gene Drives: A Case Study for Governance.

Gene drives have already challenged governance systems. In this case study, we explore the International Genetically Engineered Machine (iGEM) competition's experiences in gene drive-related research and lessons in developing, revising, and implementing a governance system. iGEM's experiences and lessons are distilled into 6 key insights for future gene drive policy development in the United States: (1) gene drives deserve special attention because of their potential for widescale impact and remaining uncertainty about how to evaluate intergenerational and transboundary risks; (2) an adaptive risk management approach is logical for gene drives because of the rapidly changing technical environment; (3) review by individual technical experts is limited and may fail to incorporate other forms of expertise and, therefore, must be complemented with a range of alternative governance methods; (4) current laboratory biosafety and biosecurity review processes may not capture gene drive research or its components in practice even if they are covered theoretically; (5) risk management for research and development must incorporate discussions of values and broader implications of the work; and (6) a regular technology horizon scanning capacity is needed for the early identification of advances that could pose governance system challenges.

A review of foot finite element modelling for pressure ulcer prevention in bedrest: Current perspectives and future recommendations.

Pressure ulcers (PUs) are a major public health challenge, having a significant impact on healthcare service and patient quality of life. Computational biomechanical modelling has enhanced PU research by facilitating the investigation of pressure responses in subcutaneous tissue and skeletal muscle. Extensive work has been undertaken on PUs on patients in the seated posture, but research into heel ulcers has been relatively neglected. The aim of this review was to address the key challenges that exist in developing an effective FE foot model for PU prevention and the confusion surrounding the wide range of outputs reported. Nine FE foot studies investigating heel ulcers in bedrest were identified and reviewed. Six studies modelled the posterior part of the heel, two included the calf and foot, and one modelled the whole body. Due to the complexity of the foot anatomy, all studies involved simplification or assumptions regarding parts of the foot structure, boundary conditions and material parameters. Simulations aimed to understand better the stresses and strains exhibited in the heel soft tissues of the healthy foot. The biomechanical properties of soft tissue derived from experimental measurements are critical for developing a realistic model and consequently guiding clinical decisions. Yet, little to no validation was reported in each of the studies. If FE models are to address future research questions and clinical applications, then sound verification and validation of these models is required to ensure accurate conclusions and prediction of patient outcomes. Recommendations and considerations for future FE studies are therefore proposed.

Expression of Endogenous Putative TSH Binding Protein in Orbit.

Thyroid stimulating antibodies (TSAB) cause Graves' disease and contribute to Graves' Orbitopathy (GO) pathogenesis. We hypothesise that the presence of TSH binding proteins (truncated TSHR variants (TSHRv)) and/or nonclassical ligands such as thyrostimulin (α2ß5) might provide a mechanism to protect against or exacerbate GO. We analysed primary human orbital preadipocyte-fibroblasts (OF) from GO patients and people free of GO (non-GO). Transcript (QPCR) and protein (western blot) expression levels of TSHRv were measured through an adipogenesis differentiation process. Cyclic-AMP production by TSHR activation was studied using luciferase-reporter and RIA assays. After differentiation, TSHRv levels in OF from GO were significantly higher than non-GO (p = 0.039), and confirmed in ex vivo analysis of orbital adipose samples. TSHRv western blot revealed a positive signal at 46 kDa in cell lysates and culture media (CM) from non-GO and GO-OF. Cyclic-AMP decreased from basal levels when OF were stimulated with TSH or Monoclonal TSAB (M22) before differentiation protocol, but increased in differentiated cells, and was inversely correlated with the TSHRv:TSHR ratio (Spearman correlation: TSH r = -0.55, p = 0.23, M22 r = 0.87, p = 0.03). In the bioassay, TSH/M22 induced luciferase-light was lower in CM from differentiated GO-OF than non-GO, suggesting that secreted TSHRv had neutralised their effects. α2 transcripts were present but reduced during adipogenesis (p < 0.005) with no difference observed between non-GO and GO. ß5 transcripts were at the limit of detection. Our work demonstrated that TSHRv transcripts are expressed as protein, are more abundant in GO than non-GO OF and have the capacity to regulate signalling via the TSHR.

Full-field MRI measurements of in-vivo positional brain shift reveal the significance of intra-cranial geometry and head orientation for stereotactic surgery.

Positional brain shift (PBS), the sagging of the brain under the effect of gravity, is comparable in magnitude to the margin of error for the success of stereotactic interventions ([Formula: see text] 1 mm). This non-uniform shift due to slight differences in head orientation can lead to a significant discrepancy between the planned and the actual location of surgical targets. Accurate in-vivo measurements of this complex deformation are critical for the design and validation of an appropriate compensation to integrate into neuronavigational systems. PBS arising from prone-to-supine change of head orientation was measured with magnetic resonance imaging on 11 young adults. The full-field displacement was extracted on a voxel-basis via digital volume correlation and analysed in a standard reference space. Results showed the need for target-specific correction of surgical targets, as a significant displacement ranging from 0.52 to 0.77 mm was measured at surgically relevant structures. Strain analysis further revealed local variability in compressibility: anterior regions showed expansion (both volume and shape change), whereas posterior regions showed small compression, mostly dominated by shape change. Finally, analysis of correlation demonstrated the potential for further patient- and intervention-specific adjustments, as intra-cranial breadth and head tilt correlated with PBS reaching statistical significance.

Alternative radiopacifiers for polymethyl methacrylate bone cements: Silane-treated anatase titanium dioxide and yttria-stabilised zirconium dioxide.

Poly (methyl methacrylate) (PMMA) bone cement is widely used for anchoring joint arthroplasties. In cement brands approved for these procedures, micron-sized particles (usually barium sulphate, BaSO4) act as the radiopacifier. It has been postulated that these particles act as sites for crack initiation and subsequently cement fatigue. This study investigated whether alternative radiopacifiers, anatase titanium dioxide (TiO2) and yttria-stabilised zirconium dioxide (ZrO2), could improve the in vitro mechanical, fatigue crack propagation and biological properties of polymethyl methacrylate (PMMA) bone cement and whether their coating with a silane could further enhance cement performance. Cement samples containing 0, 5, 10, 15, 20 and 25%w/w TiO2 or ZrO2 and 10%w/w silane-treated TiO2 or ZrO2 were prepared and characterised in vitro in terms of radiopacity, compressive and bending strength, bending modulus, fatigue crack propagation, hydroxyapatite forming ability and MC3T3-E1 cell attachment and viability. Cement samples with greater than 10%w/w TiO2 and ZrO2 had a similar radiopacity to the control 10%w/w BaSO4 cement and commercial products. The addition of TiO2 and ZrO2 to bone cement reduced the bending strength and fracture toughness and increased fatigue crack propagation due to the formation of agglomerations and voids. Silane treating TiO2 reversed this effect, enhancing the dispersion and adhesion of particles to the PMMA matrix and resulted in improved mechanical properties and fatigue crack propagation resistance. Silane-treated TiO2 cements had increased nucleation of hydroxyapatite and MC3T3-E1 cell attachment in vitro, without significantly compromising cell viability. This research has demonstrated that 10%w/w silane-treated anatase TiO2 is a promising alternative radiopacifier for PMMA bone cement offering additional benefits over conventional BaSO4 radiopacifiers.

80 questions for UK biological security.

Multiple national and international trends and drivers are radically changing what biological security means for the United Kingdom (UK). New technologies present novel opportunities and challenges, and globalisation has created new pathways and increased the speed, volume and routes by which organisms can spread. The UK Biological Security Strategy (2018) acknowledges the importance of research on biological security in the UK. Given the breadth of potential research, a targeted agenda identifying the questions most critical to effective and coordinated progress in different disciplines of biological security is required. We used expert elicitation to generate 80 policy-relevant research questions considered by participants to have the greatest impact on UK biological security. Drawing on a collaboratively-developed set of 450 questions, proposed by 41 experts from academia, industry and the UK government (consulting 168 additional experts) we subdivided the final 80 questions into six categories: bioengineering; communication and behaviour; disease threats (including pandemics); governance and policy; invasive alien species; and securing biological materials and securing against misuse. Initially, the questions were ranked through a voting process and then reduced and refined to 80 during a one-day workshop with 35 participants from a variety of disciplines. Consistently emerging themes included: the nature of current and potential biological security threats, the efficacy of existing management actions, and the most appropriate future options. The resulting questions offer a research agenda for biological security in the UK that can assist the targeting of research resources and inform the implementation of the UK Biological Security Strategy. These questions include research that could aid with the mitigation of Covid-19, and preparation for the next pandemic. We hope that our structured and rigorous approach to creating a biological security research agenda will be replicated in other countries and regions. The world, not just the UK, is in need of a thoughtful approach to directing biological security research to tackle the emerging issues.

Science, technology, security: Towards critical collaboration.

Science and technology play a central role in the contemporary governance of security, both as tools for the production of security and as objects of security concern. Scholars are increasingly seeking to not only critically reflect on the interplays between science, technology and security, but also engage with the practices of security communities that shape and are shaped by science and technology. To further help this growth of interest in security topics within science and technology studies (STS), we explore possible modes of socio-technical collaboration with security communities of practice. Bringing together literatures from STS and critical security studies, we identify several key challenges to critical social engagement of STS scholars in security-related issues. We then demonstrate how these challenges played out over the course of three case studies from our own experience in engaging security communities of practice. We use these vignettes to show that there is a rich vein of developments in both theory and practice that STS scholars can pursue by attending to the interplay of science, technology and security.