ABSTRACT
In the current work, rice straw nanofibers (RSNF) with the width of elementary fibrils (~ 4-5 nm) were isolated from rice straw. The isolated nanofibers were used with zinc oxide nanoparticles (ZnONPs) to prepare flexible nanopaper films. Tensile strength and electrical properties of the prepared RSNF/ZnONPs nanopaper were investigated. The addition of ZnONPs to RSNF nanopaper did not deteriorate its mechanical properties and showed a slight improvement in tensile strength and Young's modulus of about 14% and 10%, respectively, upon the addition of 5% of ZnONPs. Microscopy investigation using scanning electron microscopy (SEM) showed the inclusion of the ZnONPs within the RSNF. Electrical conductivity and dielectric properties as a function of frequency at different temperatures were studied. The ac-electrical conductivity increased with frequency and fitted with the power law equation. The dc- electrical conductivity of the samples verified the Arrhenius equation and the activation energies varied in the range from 0.9 to 0.42 eV. The dielectric constant decreased with increasing frequency and increased with increasing temperature, probably due to the free movement of dipole molecular chains within the RSNF nanopaper. The high values of the dielectric constant and conductivity of the prepared nanopaper films support their use in electronic components.
ABSTRACT
There has been an increasing interest in recent years in isolating cellulose nanofibers from unbleached cellulose pulps for economic, environmental, and functional reasons. In the current work, cellulose nanofibers isolated from high-lignin unbleached neutral sulfite pulp were compared to those isolated from bleached rice straw pulp in making thin-film ultrafiltration membranes by vacuum filtration on hardened filter paper. The prepared membranes were characterized in terms of their microscopic structure, hydrophilicity, pure water flux, protein fouling, and ability to remove lime nanoparticles and purify papermaking wastewater effluent. Using cellulose nanofibers isolated from unbleached pulp facilitated the formation of a thin-film membrane (with a shorter filtration time for thin-film formation) and resulted in higher water flux than that obtained using nanofibers isolated from bleached fibers, without sacrificing its ability to remove the different pollutants.
ABSTRACT
Bioactive films from hydroxypropyl methylcellulose (HPMC), nisin (N), and different percentage (5% to 75%) of TEMPO-oxidized nanofibrillated cellulose (NFC) isolated from rice straw pulp were prepared by solution casting technique and their properties were studied. Scanning electron microscope images (SEM) of films showed homogeneous surface with absence of nanofibers agglomeration. The mechanical and barrier properties were evaluated by measuring their tensile strength, tensile modulus, strain at maximum load, dynamic mechanical thermal properties (DMTA), and water vapor permeability (WVP). In all films, there was an improvement in the mechanical, thermomechanical, and moisture barrier properties as a result of presence of NFC. The molecular structure of the films was studied by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction patterns (XRD). Presence of NFC in HPMC films affected crystallinity of the later. The prepared HPMC/N, NFC/N, and HPMC/N/NFC films exhibited significant antimicrobial activities against Gram-positive bacteria Staphylococcus aureus with noticeable controlled release of nisin in case of films containing HPMC/NFC.
Subject(s)
Cyclic N-Oxides/chemistry , Drug Carriers/chemistry , Drug Liberation , Hypromellose Derivatives/chemistry , Mechanical Phenomena , Nanofibers/chemistry , Nisin/chemistry , Nanocomposites/chemistry , Oxidation-Reduction , Permeability , Steam , Temperature , Tensile StrengthABSTRACT
The aim of the present work was to study the use of cellulose nanocrystals (CNC) and chitosan nanoparticles (CHNP) for developing controlled-release drug delivery system of the anti-hyperglycemic drug Repaglinide (RPG). CNC was isolated from palm fruit stalks by sulfuric acid hydrolysis; the dimensions of the isolated nanocrystals were 86-237â¯nm in length and 5-7â¯nm in width. Simple and economic method was used for the fabrication of controlled release drug delivery system from CNC and CHNP loaded with RPG drug via ionic gelation of chitosan in the presence of CNC and RPG. The prepared systems showed high drug encapsulation efficiency of about ~98%. Chemical modification of CNC by oxidation to introduce carboxylic groups on their surface (OXCNC) was also carried out for further controlling of RPG release. Particles size analysis showed that the average size of CHNP was about 197â¯nm while CHNP/CNC/RPG or CHNP/OXCNC/RPG nanoparticles showed average size of 215-310â¯nm. Compatibility studies by Fourier transform infrared (FTIR) spectroscopy showed no chemical reaction between RPG and the system's components used. By studying the drug release kinetic, all the prepared RPG formulations followed Higuchi model, indicating that the drug released by diffusion through the nanoparticles polymeric matrix.
