ABSTRACT
Electroactive coatings for smart wearable textiles based on a furan bio-epoxy monomer (BOMF) crosslinked with isophorone diamine (IPD) and additivated with carbon nanotubes (CNTs) are reported herein. The effect of BOMF/IPD molar ratio on the curing reaction, as well as on the properties of the crosslinked resins was first assessed, and it was found that 1.5:1 BOMF/IPD molar ratio provided higher heat of reaction, glass transition temperature, and mechanical performance. The resin was then modified with CNT to prepare electrically conductive nanocomposite films, which exhibited conductivity values increased by eight orders of magnitude upon addition of 5 phr of CNTs. The epoxy/CNT nanocomposites were finally applied as coatings onto a cotton fabric to develop electrically conductive, hydrophobic and breathable textiles. Notably, the integration of CNTs imparted efficient and reversible electrothermal behavior to the cotton fabric, showcasing its potential application in smart and comfortable wearable electronic devices.
ABSTRACT
The potential of furan-based epoxy thermosets as a greener alternative to diglycidyl ether of Bisphenol A (DGEBA)-based resins has been demonstrated in recent literature. Therefore, a deep investigation of the curing behaviour of these systems may allow their use for industrial applications. In this work, the curing mechanism of 2,5-bis[(oxiran-2-ylmethoxy)methyl]furan (BOMF) with methyl nadic anhydride (MNA) in the presence of 2-methylimidazole as a catalyst is analyzed. In particular, three systems characterized by different epoxy/anhydride molar ratios are investigated. The curing kinetics are studied through differential scanning calorimetry, both in isothermal and non-isothermal modes. The total heat of reaction of the epoxy resin as well as its activation energy are estimated by the non-isothermal measurements, while the fitting of isothermal data with Kamal's autocatalytic model provides the kinetic parameters. The results are discussed as a function of the resin composition. The global activation energy for the curing process of BOMF/MNA resins is in the range 72-79 kJ/mol, depending on both the model used and the sample composition; higher values are experienced by the system with balanced stoichiometry. By the fitting of the isothermal analysis, it emerged that the order of reaction is not only dependent on the temperature, but also on the composition, even though the values range between 0.31 and 1.24.
ABSTRACT
The last two decades have witnessed a significant growth in using bioderived materials, driven by the necessity of replacing fossil-derived precursors, reducing the fossil fuel consumption, and lowering the global environmental impact. This is possible thanks to the availability of abundant resources from biomasses and the development of optimized technologies based on the principles of sustainability and circular economy. Herein, we report on the synthesis and characterization of new carbohydrate-derived epoxy resins. In particular, 2,5-bis[(oxiran-2-ylmethoxy)methyl]furan has been synthesized and cured with methyl nadic anhydride. The effect of different initiators was studied, in order to identify the most efficient curable formulations. A series of resins was then prepared varying the epoxide-anhydride ratios. The results gathered from physicochemical, mechanical, morphological analyses have demonstrated that the produced furan-based thermosets have the potential to be proposed as sustainable alternatives to the traditional, bisphenol A-containing epoxy resins.
