Direct Integration of Perovskite Solar Cells with Carbon Fiber Substrates.

Integrating photovoltaic devices onto the surface of carbon-fiber-reinforced polymer substrates should create materials with high mechanical strength that are also able to generate electrical power. Such devices are anticipated to find ready applications as structural, energy-harvesting systems in both the automotive and aeronautical sectors. Here, the fabrication of triple-cation perovskite n-i-p solar cells onto the surface of planarized carbon-fiber-reinforced polymer substrates is demonstrated, with devices utilizing a transparent top ITO contact. These devices also contain a "wrinkled" SiO2 interlayer placed between the device and substrate that alleviates thermally induced cracking of the bottom ITO layer. Devices are found to have a maximum stabilized power conversion efficiency of 14.5% and a specific power (power per weight) of 21.4 W g-1 (without encapsulation), making them highly suitable for mobile power applications.

Development of a Novel Friction Model for Machining Simulations in Unidirectional Composite Materials.

Constant coefficients of friction (COFs) are currently used in the literature to describe the contact mechanics between tool and workpiece for finite element (FE) machining simulation of carbon fibre-reinforced polymers (CFRPs). However, these are solely based on closed-loop tribology experimentation, which insufficiently represent machining conditions. To overcome this gap in the knowledge, this work proposes a novel experimental open-loop tribological testing method to produce a dynamic FE friction model for CFRP machining simulations. The newly proposed dynamic friction model is based on a function of fibre angle, contact pressure and slip rate, and it has been validated to both experimental results and constant COF FE simulations. The main aim of this article is to create a link between machining, tribology and FE simulation, by implementing cutting-edge tribological testing that results in highly accurate FE simulations. This dynamic model has been shown to improve the accuracy of open-loop tribological simulations, giving confidence in future implantation in CFRP machining simulations.

Structural Variation and Chemical Performance-A Study of the Effects of Chemical Structure upon Epoxy Network Chemical Performance.

Epoxy resins are used widely as protective coatings, in a wide range of harsh chemical environments. This work explores the influence of subtle structural variation in both epoxy and amine monomers upon chemical performance of cured networks, whether changing molecular geometry, the nature of the chemistry, or the mass between cross-linking reactive groups. To achieve this, four industrially relevant epoxy resins (two based on bisphenol A-Epikote 828 (E828) and Dow Epoxy Resin 332 (DER 332)-and two based on bisphenol F-Dow Epoxy Resin 354 (DER 354) and Araldite PY306 (PY306)) and the isomerically pure para-para-diglycidyl ether of bisphenol F (ppDGEBF) were used to explore variation caused by epoxy monomer variation. Four similar amines (meta-xylylenediamine (MXDA), para-xylylenediamine (PXDA), 1,3-bis(aminomethyl)cyclohexane (1,3-BAC), 1,4-bis(aminomethyl)cyclohexane (1,4-BAC)) were used to explore any variations caused by regioisomerism and aromaticity. Bisphenol F-based resins were found to outperform bisphenol A-based analogues, and chain extension within the epoxy component was found to be detrimental to performance. For amines, 1,3-substitution (vs 1,4) and aromaticity were both found to be beneficial to chemical performance.

X-ray nano-tomography of complete scales from the ultra-white beetles Lepidiota stigma and Cyphochilus.

High resolution X-ray nano-tomography experiments are often limited to a few tens of micrometer size volumes due to detector size. It is possible, through the use of multiple overlapping tomography scans, to produce a large area scan which can encompass a sample in its entirety. Mounting and positioning regions to be scanned is highly challenging and normally requires focused ion beam approaches. In this work we have imaged intact beetle scale cells mounted on the tip of a needle using a micromanipulator stage. Here we show X-ray holotomography data for single ultra-white scales from the beetles Lepidiota stigma (L. stigma) and Cyphochilus which exhibit the most effective scattering of white light in the literature. The final thresholded matrices represent a scan area of 25 × 70 × 362.5 µm and 25 × 67.5 × 235µm while maintaining a pixel resolution of 25 nm. This tomographic approach allowed the internal structure of the scales to be captured completely intact and undistorted by the sectioning required for traditional microscopy techniques.

The Effect of High-Intensity Ultraviolet Light to Elicit Microalgal Cell Lysis and Enhance Lipid Extraction.

Currently, the energy required to produce biofuel from algae is 1.38 times the energy available from the fuel. Current methods do not deliver scalable, commercially viable cell wall disruption, which creates a bottleneck on downstream processing. This is primarily due to the methods depositing energy within the water as opposed to within the algae. This study investigates ultraviolet B (UVB) as a disruption method for the green algae Chlamydomonas reinhardtii, Dunaliella salina and Micractinium inermum to enhance solvent lipid extraction. After 232 seconds of UVB exposure at 1.5 W/cm², cultures of C. reinhardtii (culture density 0.7 mg/mL) showed 90% disruption, measured using cell counting, correlating to an energy consumption of 5.6 MJ/L algae. Small-scale laboratory tests on C. reinhardtii showed bead beating achieving 45.3 mg/L fatty acid methyl esters (FAME) and UV irradiation achieving 79.9 mg/L (lipids solvent extracted and converted to FAME for measurement). The alga M. inermum required a larger dosage of UVB due to its thicker cell wall, achieving a FAME yield of 226 mg/L, compared with 208 mg/L for bead beating. This indicates that UV disruption had a higher efficiency when used for solvent lipid extraction. This study serves as a proof of concept for UV irradiation as a method for algal cell disruption.

Wing scale ultrastructure underlying convergent and divergent iridescent colours in mimetic Heliconius butterflies.

Iridescence is an optical phenomenon whereby colour changes with the illumination and viewing angle. It can be produced by thin film interference or diffraction. Iridescent optical structures are fairly common in nature, but relatively little is known about their production or evolution. Here we describe the structures responsible for producing blue-green iridescent colour in Heliconius butterflies. Overall the wing scale structures of iridescent and non-iridescent Heliconius species are very similar, both having longitudinal ridges joined by cross-ribs. However, iridescent scales have ridges composed of layered lamellae, which act as multilayer reflectors. Differences in brightness between species can be explained by the extent of overlap of the lamellae and their curvature as well as the density of ridges on the scale. Heliconius are well known for their Müllerian mimicry. We find that iridescent structural colour is not closely matched between co-mimetic species. Differences appear less pronounced in models of Heliconius vision than models of avian vision, suggesting that they are not driven by selection to avoid heterospecific courtship by co-mimics. Ridge profiles appear to evolve relatively slowly, being similar between closely related taxa, while ridge density evolves faster and is similar between distantly related co-mimics.

Control of the Porous Structure of Polystyrene Particles Obtained by Nonsolvent Induced Phase Separation.

Porous polystyrene microspheres were produced by a process of nonsolvent induced phase separation (NIPS) from ternary polymer-solvent-nonsolvent (polystyrene-toluene-ethanol) systems and characterized by scanning electron microscopy (SEM) and small-angle X-ray scattering (SAXS) techniques. This study provides evidence for a link between the structural morphology of the porous polystyrene particles and the polystyrene concentration in the initial solutions. A reciprocal relationship between pore diameter and polymer concentration was observed for the systems with the polymer amount below the critical chain overlap concentration, C*. Above C*, this relationship breaks down. The reciprocal relationship between porosity and polymer concentration can be used to facilitate the fine control of the void size. We demonstrate that the observed reciprocal relationship between pore diameter and polymer concentration correlates well with the relative amount of nonsolvent present in the system at the onset of the phase separation process. The pore size can be reduced and, consequently, the pore surface area can be increased either by reducing the polymer concentration in the initial solution or by decreasing the polymer molecular weight in the sample composition.

Spatially modulated structural colour in bird feathers.

Eurasian Jay (Garrulus glandarius) feathers display periodic variations in the reflected colour from white through light blue, dark blue and black. We find the structures responsible for the colour are continuous in their size and spatially controlled by the degree of spinodal phase separation in the corresponding region of the feather barb. Blue structures have a well-defined broadband ultra-violet (UV) to blue wavelength distribution; the corresponding nanostructure has characteristic spinodal morphology with a lengthscale of order 150 nm. White regions have a larger 200 nm nanostructure, consistent with a spinodal process that has coarsened further, yielding broader wavelength white reflectance. Our analysis shows that nanostructure in single bird feather barbs can be varied continuously by controlling the time the keratin network is allowed to phase separate before mobility in the system is arrested. Dynamic scaling analysis of the single barb scattering data implies that the phase separation arrest mechanism is rapid and also distinct from the spinodal phase separation mechanism i.e. it is not gelation or intermolecular re-association. Any growing lengthscale using this spinodal phase separation approach must first traverse the UV and blue wavelength regions, growing the structure by coarsening, resulting in a broad distribution of domain sizes.

Self-Assembly-Driven Electrospinning: The Transition from Fibers to Intact Beaded Morphologies.

Polymer beads have attracted considerable interest for use in catalysis, drug delivery, and photonics due to their particular shape and surface morphology. Electrospinning, typically used for producing nanofibers, can also be used to fabricate polymer beads if the solution has a sufficiently low concentration. In this work, a novel approach for producing more uniform, intact beads is presented by electrospinning self-assembled block copolymer (BCP) solutions. This approach allows a relatively high polymer concentration to be used, yet with a low degree of entanglement between polymer chains due to microphase separation of the BCP in a selective solvent system. Herein, to demonstrate the technology, a well-studied polystyrene-poly(ethylene butylene)-polystyrene triblock copolymer is dissolved in a co-solvent system. The effect of solvent composition on the characteristics of the fibers and beads is intensively studied, and the mechanism of this fiber-to-bead is found to be dependent on microphase separation of the BCP.

Coupling pH-responsive polymer brushes to electricity: switching thickness and creating waves of swelling or collapse.

Electrolysis of water is proposed as a method to couple the pH-responsive behavior of polymer brushes to an electrical stimulus. It is shown that an electrode in close proximity to a pH-responsive polymer brush can change the local solution pH, inducing either swelling or collapse of the polymer brush. By alternating the bias of the voltage applied to the electrode, either acidic or alkaline conditions can be generated, and reproducible cycles of polymer brush swelling and collapse can be achieved. It was found that the length of time which the electrical stimulus is applied to the electrodes can be as short as 10 s and that, once "switched", polymer brushes remain in the switched state for many minutes after the electrical stimulus is turned off. In other experiments, two electrodes were positioned 10 cm apart with a pH-responsive brush in between. Under these conditions waves of either acidic or alkaline solution pH could be generated which caused a coincident wave of polymer brush swelling or collapse. These waves originate from one electrode and travel across the brush surface toward the opposite electrode with a velocity of ~40 µm s(-1).

Interplay between gelation and phase separation in aqueous solutions of methylcellulose and hydroxypropylmethylcellulose.

Thermally induced gelation in aqueous solutions of methylcellulose (MC) and hydroxypropylmethylcellulose (HPMC) has been studied by rheological, optical microscopy, and turbidimetry measurements. The structural and mechanical properties of these hydrogels are dominated by the interplay between phase separation and gelation. In MC solutions, phase separation takes place almost simultaneously with gelation. An increase in the storage modulus is coupled to the appearance of a bicontinuous structure upon heating. However, a thermal gap exists between phase separation and gelation in the case of HPMC solutions. The storage modulus shows a dramatic decrease during phase separation and then rises in the subsequent gelation. A macroporous structure forms in the gels via "viscoelastic phase separation" linked to "double phase separation".

Controlling the motion and placement of micrometer-sized metal particles using patterned polymer brush surfaces.

In this paper, we show that silicon surfaces patterned with poly(methacrylic acid) brushes are able to control the Brownian motion of 2-3 µm iron particles, which sediment onto the surface in aqueous solution and experience differences in repulsive force depending upon their position. Differences in repulsion lead to different gravitational potential energies across the surface, which gives bias to the Brownian motion taking place. Three regimes have been identified depending upon the brush height: (i) no control of Brownian motion when the brush height is small, (ii) Brownian motion that is influenced by the polymer brush when the brush 17 height is intermediate, (iii) Brownian motion that is confined by polymer brush barriers when the brush height is greatest. The height of brush found necessary to significantly influence iron particle motion was small at 39 nm or 2% of the particle diameter.

Characterization of polymer-silica nanocomposite particles with core-shell morphologies using Monte Carlo simulations and small angle X-ray scattering.

A two-population model based on standard small-angle X-ray scattering (SAXS) equations is verified for the analysis of core-shell structures comprising spherical colloidal particles with particulate shells. First, Monte Carlo simulations of core-shell structures are performed to demonstrate the applicability of the model. Three possible shell packings are considered: ordered silica shells due to either charge-dependent repulsive or size-dependent Lennard-Jones interactions or randomly arranged silica particles. In most cases, the two-population model produces an excellent fit to calculated SAXS patterns for the simulated core-shell structures, together with a good correlation between the fitting parameters and structural parameters used for the simulation. The limits of application are discussed, and then, this two-population model is applied to the analysis of well-defined core-shell vinyl polymer/silica nanocomposite particles, where the shell comprises a monolayer of spherical silica nanoparticles. Comprehensive SAXS analysis of a series of poly(styrene-co-n-butyl acrylate)/silica colloidal nanocomposite particles (prepared by the in situ emulsion copolymerization of styrene and n-butyl acrylate in the presence of a glycerol-functionalized silica sol) allows the overall core-shell particle diameter, the copolymer latex core diameter and polydispersity, the mean silica shell thickness, the mean silica diameter and polydispersity, the volume fractions of the two components, the silica packing density, and the silica shell structure to be obtained. These experimental SAXS results are consistent with electron microscopy, dynamic light scattering, thermogravimetry, helium pycnometry, and BET surface area studies. The high electron density contrast between the (co)polymer and the silica components, together with the relatively low polydispersity of these core-shell nanocomposite particles, makes SAXS ideally suited for the characterization of this system. Moreover, these results can be generalized for other types of core-shell colloidal particles.

Time-resolved small-angle X-ray scattering studies of polymer-silica nanocomposite particles: initial formation and subsequent silica redistribution.

Small angle X-ray scattering (SAXS) is a powerful characterization technique for the analysis of polymer-silica nanocomposite particles due to their relatively narrow particle size distributions and high electron density contrast between the polymer core and the silica shell. Time-resolved SAXS is used to follow the kinetics of both nanocomposite particle formation (via silica nanoparticle adsorption onto sterically stabilized poly(2-vinylpyridine) (P2VP) latex in dilute aqueous solution) and also the spontaneous redistribution of silica that occurs when such P2VP-silica nanocomposite particles are challenged by the addition of sterically stabilized P2VP latex. Silica adsorption is complete within a few seconds at 20 °C and the rate of adsorption strongly dependent on the extent of silica surface coverage. Similar very short time scales for silica redistribution are consistent with facile silica exchange occurring as a result of rapid interparticle collisions due to Brownian motion; this interpretation is consistent with a zeroth-order Smoluchowski-type calculation.

Shear ordered diblock copolymers with tuneable optical properties.

A series of high molecular weight poly(styrene-b-isoprene) block copolymers with optical properties defined by composition in a non-selective solvent were studied using simultaneous ultra small angle X-ray scattering (USAXS) and optical spectrometry. A small magnitude shear produces ordered and oriented states in the copolymer solutions that persist for extended periods of time, and also have superior optical properties that are directly attributable to the mesoscopic block copolymer (BCP) morphology. We have demonstrated that the optical transmission of these materials can be tuned by the addition of low molecular weight poly(isoprene) and poly(styrene) to swell their respective domains within the diblock copolymer. The optical transmission peak for the diblocks could be tuned; from 380 nm-440 nm for the 670k diblock, 425 nm-540 nm for the 850k diblock and 541 nm-625 nm for the 1 million diblock by altering the solution concentration and composition. The full width at half maximum that can be achieved for the optical transmission peaks is as small as 15 nm at 473 nm with a Δλ/λ of 0.03, highlighting the high quality ordering in these systems. Also a small shift in the transmission peak wavelength was observed across a wide angle of view (15 nm at 30°) suggesting that these materials could be used for large area narrow band optical filters.

Unexpected facile redistribution of adsorbed silica nanoparticles between latexes.

Addition of excess sterically stabilized P2VP latex to a colloidal dispersion of P2VP-silica nanocomposite particles (with silica shells at full monolayer coverage) leads to the facile redistribution of the silica nanoparticles such that partial coverage of all the P2VP latex particles is achieved. This silica exchange, which is complete within 1 h at 20 degrees C as judged by small-angle x-ray scattering, is observed for nanocomposite particles prepared by heteroflocculation, but not for nanocomposite particles prepared by in situ copolymerization. These observations are expected to have important implications for the optimization of nanocomposite formulations in the coatings industry.

Noncovalent cross-linking of casein by epigallocatechin gallate characterized by single molecule force microscopy.

Interaction of the tea polyphenol epigallocatechin gallate (EGCG) with beta-casein in milk affects the taste of tea and also affects the stability of the tea and the antioxidant ability of the EGCG. In addition, interaction of polyphenols with the chemically similar salivary proline-rich proteins is largely responsible for the astringency of tea and red wine. With the use of single molecule force microscopy, we demonstrate that the interaction of EGCG with a single casein molecule is multivalent and leads to reduction in the persistence length of casein as calculated using the wormlike chain model and a reduction in its radius of gyration. The extra force required to stretch casein in the presence of EGCG is largely entropic, suggesting that multivalent hydrophobic interactions cause a compaction of the casein micelle.

Creaming in black tea.

Tea cream is the precipitate formed as tea cools. Its formation has been studied by X-ray scattering, and it is shown that a higher tea concentration leads to earlier onset of creaming and larger particles and that addition of theaflavin and calcium promotes creaming. Association constants between the major components of black tea have been obtained using NMR and show that calcium and glucose enhance the self-association of caffeine, polyphenols, and theaflavin but have little effect on hetero-association. Glycosylation of a polyphenol reduced self-association and reduced binding to caffeine. We conclude that theaflavin is important for the initiation of creaming, forming nanoclusters of typically 3 nm diameter, whereas caffeine acts more to fill in the gaps within the clusters and thus adds to the bulk of tea cream without being necessary for its initiation. Tea creaming may be reduced by increasing the solubility of the polyphenols (i.e., by glycosylation) or by removing calcium. Tea cream; theaflavin; caffeine; small-angle X-ray scattering; NMR; colloid.

Molecular model for astringency produced by polyphenol/protein interactions.

Polyphenols are responsible for the astringency of many beverages and foods. This is thought to be caused by the interaction of polyphenols with basic salivary proline-rich proteins (PRPs). It is widely assumed that the molecular origin of astringency is the precipitation of PRPs following polyphenol binding and the consequent change to the mucous layer in the mouth. Here, we use a variety of biophysical techniques on a simple model system, the binding of beta-casein to epigallocatechin gallate (EGCG). We show that at low EGCG ratios, small soluble polydisperse particles are formed, which aggregate to form larger particles as EGCG is added. There is an initial compaction of the protein as it binds to the polyphenol, but the particle subsequently increases in size as EGCG is added because of the incorporation of EGCG and then to aggregation and precipitation. These results are shown to be compatible with what is known of astringency in foodstuffs.

Are metastable, precrystallisation, density-fluctuations a universal phenomena?

In-situ observations of crystallisation in minerals and organic polymers have been made by simultaneous, time-resolved small angle X-ray scattering (SAXS) and wide angle X-ray scattering (WAXS) techniques. In isotactic polypropylene slow quiescent crystallisation shows the onset of large scale ordering prior to crystal growth. Rapid crystallisations studied by melt extrusion indicate the development of well resolved oriented SAXS patterns associated with long range order before the development of crystalline peaks in the WAXS region. Block copolymers self-assemble into mesophases in polymer melts above a critical chain length (or above a critical temperature) and this self-assembly process is shown to be susceptible to an incipient crystallisation. Mesophase formation is observed at anomalously high temperatures in ethylene-oxide containing block copolymers below the normal melting point of the polyoxy ethylene chains. Formation of calcium carbonate from aqueous solutions of sodium carbonate and calcium nitrate is observed to be a two-stage process and precipitation proceeds by the production of an amorphous metastable phase. This phase grows until it is volume filling and leads to the formation of the two polymorphs Calcite and Vaterite. These three sets of results suggest pre-nucleation density fluctuations, leading to a metastable phase, play an integral role in all three classes of crystallisation. In due course, this phase undergoes transformation to "normal" crystals.