ABSTRACT
An enhanced resistive switching (RS) effect is observed in Pt/BaTiO3(BTO)/ITO ferroelectric structures when a thin HfO2:Al2O3 (HAO) dielectric layer is inserted between Pt and BTO. The P-E hysteresis loops reveal the ferroelectric nature of both Pt/BTO/ITO and Pt/HAO/BTO/ITO structures. The relation between the RS and the polarization reversal is investigated at various temperatures in the Pt/HAO/BTO/ITO structure. It is found that the polarization reversal induces a barrier variation in the Pt/HAO/BTO interface and causes enhanced RS, which is suppressed at Curie temperature (Tc = 140 °C). Furthermore, the Pt/HAO/BTO/ITO structures show promising endurance characteristics, with a RS ratio >103 after 109 switching cycles, that make them potential candidates for resistive switching memory devices. By combining ferroelectric and dielectric layers this work provides an efficient way for developing highly efficient ferroelectric-based RS memory devices.
ABSTRACT
This study presents the development of natural rubber-Ca/P blends, as promising candidates for biomedical purposes. The specific objective was the incorporation of Ca/P into a natural rubber polymeric matrix. Ca/P crystalline phases were synthesized by the sol-gel method and the polymeric matrices were produced using natural rubber extracted from latex of the Hevea brasiliensis. The shape and size of natural rubber particles present in the NR membrane, as well as, the way the Ca/P powder grains aggregate in the polymeric matrix were investigated, giving information about the interactions between the Ca/P and the natural rubber particles. Confocal fluorescence scanning microscopy measurements allowed us to propose a structure where the Ca/P grains are surrounded by natural rubber particles. This structure may mediate Ca(2+) release for tissue regeneration. The system investigated may open new horizons for development of a bandage which provides the controlled-release of biomaterials.
Subject(s)
Biomedical Technology/instrumentation , Rubber/chemistry , Calcium Phosphates/chemical synthesis , Hevea/chemistry , Latex/chemistry , Microscopy, Confocal , Plant Extracts/chemistry , Proteins/chemistryABSTRACT
We report on a low-cost and low-tech method for the preparation of luminescent micro- and millimeter elastomeric particles with asymmetric morphology. The method of fabrication consists in UV-irradiating soft urethane/urea fluorescent spheres, which are then extracted in toluene and dried. Wrinkles appear on the irradiated portions of the particles surfaces, and the spatial periodicity can be controlled with variation in UV irradiation time and the amount of the luminescent compound. The spheres are thus composed of an urethane/urea network in which the tris(8-hydroxyquinolinato)aluminum (Alq3) fluorescent compound was incorporated. The asymmetric morphology and the optical properties of the resultant particles have been confirmed by scanning electron microscopy, atomic force microscopy, optical microscopy, and UV-Vis spectrophotometry. The system shows negligible leaching, and the encapsulation of the Alq3 without recourse to covalent bonding to the polymeric matrix has the advantage of allowing the tuning of the spheres morphology and fluorescence.
