Strategies for Improving Efficiency and Stability of Inverted Perovskite Solar Cells.

Perovskite solar cells (PSCs) have attracted widespread research and commercialization attention because of their high power conversion efficiency (PCE) and low fabrication cost. The long-term stability of PSCs should satisfy industrial requirements for photovoltaic devices. Inverted PSCs with a p-i-n architecture exhibit considerable advantages because of their excellent stability and competitive efficiency. The continuously broken-through PCE of inverted PSCs shows huge application potential. This review summarizes the developments and outlines the characteristics of inverted PSCs including charge transport layers (CTLs), perovskite compositions, and interfacial regulation strategies. The latest effective CTLs, interfacial modification, and stability promotion strategies especially under light, thermal, and bias conditions are emphatically analyzed. Furthermore, the applications of the inverted structure in high-efficiency and stable tandem, flexible photovoltaic devices, and modules and their main obstacles are systematically introduced. Finally, the remaining challenges faced by inverted devices are discussed, and several directions for advancing inverted PSCs are proposed according to their development status and industrialization requirements.

Functionalization of Pentacene: A Facile and Versatile Approach to Contorted Polycyclic Aromatic Hydrocarbons.

In this work, a facile and versatile strategy for the synthesis of contorted polycyclic aromatic hydrocarbons (PAHs) starting from the functionalized pentacene was established. A series of novel PAHs 1-4 and their derivatives were synthesized through a simple two-step synthesis procedure involving an intramolecular reductive Friedel-Crafts cyclization of four newly synthesized pentacene aldehydes 5-8 as a key step. All the molecules were confirmed by single-crystal X-ray diffraction and their photophysical and electrochemical properties were studied in detail. Interestingly, the most striking feature of 1-4 is their highly contorted carbon structures and the accompanying helical chirality. In particular, the optical resolution of 2 was successfully achieved by chiral-phase HPLC, and the enantiomers were characterized by circular dichroism and circularly polarized luminescence spectroscopy. Despite the highly nonplanar conformations, these contorted PAHs exhibited emissive properties with moderate-to-good fluorescence quantum yields, implying the potential utility of this series PAHs as high-quality organic laser dyes. By using a self-assembly method with the help of epoxy resin, a bottle microlaser based on 3 a was successfully illustrated with a lasing wavelength of 567.8 nm at a threshold of 0.3 mJ/cm2 . We believe that this work will shed light on the chemical versatility of pentacene and its derivatives in the construction of novel functionalized PAHs.

Component Distribution Regulation in Sn-Pb Perovskite Solar Cells through Selective Molecular Interaction.

Tin-lead (Sn-Pb) perovskite solar cells (PSCs) with near-ideal bandgap still lag behind the pure lead PSCs. Disordered heterojunctions caused by inhomogeneous Sn/Pb ratio in the binary perovskite film induce large recombination loss. Here, an Sn-Pb perovskite film is reported with homogeneous component and energy distribution by introducing hydrazine sulfate (HS) in Sn perovskite precursor. HS can form hydrogen bond network and coordinate with FASnI3 thus no longer bond with Pb2+ , which reduces the crystallization rate of tin perovskite to the level of lead analog. The strong bonding between SO4 2- and Sn2+ can also suppress its oxidation. As a result, the Sn-Pb PSCs with HS exhibit a significantly improved VOC of 0.91 V along with a high efficiency of 23.17%. Meanwhile, the hydrogen bond interaction network, strong bonding between Sn2+ and sulfate ion also improve the thermal, storage, and air stability of resulting devices.

Surface Reconstruction of CsPbBr3 Nanocrystals by the Ligand Engineering Approach for Achieving High Quantum Yield and Improved Stability.

Oleylamine/oleic acid (OAm/OA) as the commonly used ligand is indispensable in the synthesis of perovskite nanocrystals (PNCs). Unfortunately, poor colloidal stability and unsatisfactory photoluminescence quantum yield (PLQY) are observed, resulting from a highly dynamic binding nature between ligands. Herein, we adopt a facile hybrid ligand (DDAB/ZnBr2) passivation strategy to reconstruct the surface chemistry of CsPbBr3 NCs. The hybrid ligand can detach the native surface ligand, in which the acid-base reactions between ligands are suppressed effectively. Also, they can substitute the loose capping ligand, anchor to the surface firmly, and supply sufficient halogens to passivate the surface trap, realizing an exceptional PLQY of 95% and an enhanced tolerance toward ambient storage, UV irradiation, anti-solvents, and thermal treatment. Besides, the as-fabricated white light-emitting diode (WLED) utilizing the PNCs as the green-emitting phosphor has a luminous efficiency around 73 lm/W; the color gamut covers 125% of the NTSC standard.

Polishing the Lead-Poor Surface for Efficient Inverted CsPbI3 Perovskite Solar Cells.

Triiodide cesium lead perovskite (CsPbI3 ) has promising prospects in the development of efficient and stable photovoltaics in both single-junction and tandem structures. However, achieving inverted devices that provide good stability and are compatible to tandem devices remains a challenge, and the deep insights are still not understood. This study finds that the surface components of CsPbI3 are intrinsically lead-poor and the relevant traps are of p-type with localized states. These deep-energy-level p traps induce inferior transfer or electrons and serious nonradiative recombination at the CsPbI3 /PCBM interface, leading to the considerable open-circuit voltage (Voc ) loss and reduction of fill factor (FF). Compared to molecular passivation, polishing treatment with 1,4-butanediamine can eliminate the nonstoichiometric components and root these intrinsically lead-poor traps for superior electron transfer. The polishing treatment significantly improves the FF and Voc of the inverted CsPbI3 photovoltaics, creating an efficiency promotion from 12.64% to 19.84%. Moreover, 95% of the initial efficiency of the optimized devices is maintained after the output operation for 1000 h.

Genital Microbiota of Women From Six Ethnic Groups With and Without Human Papillomavirus Infection in Shangri-La, China.

Background: A diversity of microorganisms is associated with human health and exists in a state of dynamic equilibrium. This diversity has direct implications for the assessment of susceptibility to infectious diseases, especially human papillomavirus (HPV) infection. Methods: Here, we investigated the relationships between HPV infection and vaginal, cervical, and gut microbiota composition and assessed the levels of genital immune mediators. We selected a multiethnic area in Yunnan Province, China, to collect samples from healthy women of childbearing age. A total of 82 healthy women of childbearing age were included in this study. Vaginal, cervical, and rectal swabs were collected to analyze the microbial community, and cytokines were analyzed in some samples. Findings: Different proportions and types of HPV infection were detected in cervical (44%), vaginal (18%), and rectal (18%) swabs. HPV detected in cervical swabs was generally a high-risk type, while low-risk HPV types were primarily detected in vaginal and rectal swabs. There were some differences in this proportion as well as in the microbial community composition among different ethnic groups. Rectal samples exhibited the highest diversity index, while vaginal samples displayed the lowest diversity index. Lactobacillus dominated most of the vaginal samples, was decreased in HPV-positive samples, and differed among different ethnic groups. However, the sequence proportion of Lactobacillus in the cervix exhibited the opposite trend in those affected by HPV infection. The dynamic balance between the potential pathogens Gardnerella and Lactobacillus determines the health of the female genital system. Interpretation: This study constitutes the first step toward personalized medicine for women's reproductive health, wherein differences between the genital microbiomes of individuals would be considered in risk assessment and for subsequent disease diagnosis and treatment.

Tailoring Defects Regulation in Air-Fabricated CsPbI3 for Efficient Inverted All-Inorganic Perovskite Solar Cells with Voc of 1.225 V.

Air fabrication of CsPbI3 perovskite photovoltaics has been attractive and fast-moving owing to its compatibility to low-cost and up-scalable fabrication. However, due to the inevitable erosions, undesirable traps are formed in air-fabricated CsPbI3 crystals and seriously hinder photovoltaic performance with poor reproduction. Here, 3, 5-difluorobenzoic acid hydrazide (FBJ) is incorporated as trap regulation against external erosions in air-fabricated CsPbI3. Theoretical simulations reveal that FBJ molecules feature stronger absorbance on CsPbI3 than water, which can regulate trap formations for water erosions. In addition, FBJ with solid bonding interaction to CsPbI3 can enlarge formation energy of various defects during crystallization and further suppress traps. Moreover, profiling to reductive hydrazine groups, FBJ inhibits traps for oxidation erosions. Consequently, a champion efficiency of 19.27% with an impressive Voc of 1.225 V is realized with the inverted CsPbI3 devices. Moreover, the optimized devices present superior stability and contain 97.4% after operating at 60 °C for 600 h.

Dioscin potentiates the antitumor effect of suicide gene therapy in melanoma by gap junction intercellular communication-mediated antigen cross-presentation.

Dioscin (Dio), steroid saponin, exists in several medicinal herbs with potent anticancer efficacy. This study aimed to explore the effect of Dio on the immune-related modulation and synergistic therapeutic effects of the herpes simplex virus thymidine kinase/ganciclovir (HSV-Tk/GCV) suicide gene therapy system in murine melanoma, thereby providing a research basis to improve the potential immunomodulatory mechanism underlying combination therapy. Using both in vitro and in vivo experiments, we confirmed the immunocidal effect of Dio-potentiated suicide gene therapy on melanoma. The results showed that Dio upregulated connexin 43 (Cx43) expression and improved gap junction intercellular communication (GJIC) in B16 cells while increasing the cross-presentation of antigens by dendritic cells (DCs), eventually promoting the activation and antitumor immune killing effects of CD8+ T lymphocytes. In contrast, inhibition or blockade of the GJIC function (overexpression of mutant Cx43 tumor cells/Gap26) partially reversed the potentiating effect. The significant synergistic effect of Dio on HSV-Tk/GCV suicide gene therapy was further investigated in a B16 xenograft mouse model. The increased number and activation ratio of CD8+ T lymphocytes and the levels of Gzms-B, IFN-γ, and TNF-α in mice reconfirmed the potential modulatory effects of Dio on the immune system. Taken together, Dio targets Cx43 to enhance GJIC function, improve the antigens cross-presentation of DCs, and activate the antitumor immune effect of CD8+ T lymphocytes, thereby providing insights into the potential immunomodulatory mechanism underlying combination therapy.

Influence of Fluorine Substitution on the Photovoltaic Performance of Wide Band Gap Polymer Donors for Polymer Solar Cells.

The design and development of wide band gap (WBG) polymer donors are critical for achieving high power conversion efficiencies (PCEs) in polymer solar cells. In this work, four WBG polymer donors, Q4, Q5, Q6, and Q7, with different numbers and positions of fluorine substitution (n = 0, 2, 2, and 4, respectively) were prepared, and the effect of fluorination on their photovoltaic performance was systematically investigated. When blended with a small-molecule electron acceptor MeIC, the devices based on Q4, Q5, Q6, and Q7 showed PCEs of 10.34, 11.06, 5.26, and 0.48%, respectively. When coupled with a low band gap polymer acceptor PYIT to fabricate all-polymer solar cells (all-PSCs), while the other three polymers (Q5-Q7) exhibited much lower PCEs in the range of 0.12-6.71%, the Q4 polymer-based all-PSCs showed the highest PCE of 15.06%, comparable to that of the devices fabricated with the star polymer donor PM6 (PCE = 15.00%). Detailed physicochemical and morphological studies revealed that an over-substitution of F in Q7 results in undesired low-lying HOMO levels and phase separation with the acceptors, thus resulting in its inferior PCEs. Moreover, the less F-substitution and controlling of the positions of F-substitution position in Q4 and Q5 can improve the HOMO energy level matching as well as morphologies between these two polymers with the acceptors, which in turn gives rise to higher performances. Clearly, our results indicate that Q4 is a promising donor candidate for high-performance all-PSCs, and the fine-tuning of both the number and positions of F-substitution in the polymer backbone is essential in developing high-performance WBG polymer donors.

Constructing heterojunctions by surface sulfidation for efficient inverted perovskite solar cells.

A stable perovskite heterojunction was constructed for inverted solar cells through surface sulfidation of lead (Pb)-rich perovskite films. The formed lead-sulfur (Pb-S) bonds upshifted the Fermi level at the perovskite interface and induced an extra back-surface field for electron extraction. The resulting inverted devices exhibited a power conversion efficiency (PCE) >24% with a high open-circuit voltage of 1.19 volts, corresponding to a low voltage loss of 0.36 volts. The strong Pb-S bonds could stabilize perovskite heterojunctions and strengthen underlying perovskite structures that have a similar crystal lattice. Devices with surface sulfidation retained more than 90% of the initial PCE after aging at 85°C for 2200 hours or operating at the maximum power point under continuous illumination for 1000 hours at 55° ± 5°C.

In Silico Prediction and Bioactivity Evaluation of Chemical Ingredients Against Influenza A Virus From Isatis tinctoria L.

Influenza A virus (IAV) is one of the major causes of seasonal endemic diseases and unpredictable periodic pandemics. Due to the high mutation rate and drug resistance, it poses a persistent threat and challenge to public health. Isatis tinctoria L. (Banlangen, BLG), a traditional herbal medicine widely used in Asian countries, has been reported to possess strong efficacy on respiratory viruses, including IAV. However, its effective anti-IAV components and the mechanism of actions (MOAs) are not yet fully elucidated. In this study, we first summarized the chemical components and corresponding contents in BLG according to current available chemical analysis literature. We then presented a network-based in silico framework for identifying potential drug candidates against IAV from BLG. A total of 269 components in BLG were initially screened by drug-likeness and ADME (absorption, distribution, metabolism, and excretion) evaluation. Thereafter, network predictive models were built via the integration of compound-target networks and influenza virus-host proteins. We highlighted 23 compounds that possessed high potential as anti-influenza virus agents. Through experimental evaluation, six compounds, namely, eupatorin, dinatin, linarin, tryptanthrin, indirubin, and acacetin, exhibited good inhibitory activity against wild-type H1N1 and H3N2. Particularly, they also exerted significant effects on drug-resistant strains. Finally, we explored the anti-IAV MOAs of BLG and showcased the potential biological pathways by systems pharmacology analysis. In conclusion, this work provides important information on BLG regarding its use in the development of anti-IAV drugs, and the network-based prediction framework proposed here also offers a powerfulful strategy for the in silico identification of novel drug candidates from complex components of herbal medicine.

Anomalous NH3-Induced Resistance Enhancement in Halide Perovskite MAPbI3 Film and Gas Sensing Performance.

Despite the growing interest in halide perovskite-based NH3 sensors, the NH3 sensing mechanism is still not well understood. Here, we report an anomalous behavior of resistance enhancement in CH3NH3PbI3(MAPbI3) perovskite films upon exposure to NH3 gas, which is contrary to a resistance drop trend in previously reported perovskites. We propose a NH3 sensing mechanism in which the anomalous resistance enhancement is dominated by grain boundaries of perovskites. It is demonstrated that NH3 molecules can substitute MA+ cations of MAPbI3 to form the insulating NH4PbI3·MA intermediate layers onto the surface of crystal grains, thereby resulting in an increase of resistance. Additionally, we construct the MAPbI3-based sensor, and achieve a gas response of 472% toward 30 ppm of NH3. This study suggests the potential of the perovskite-based NH3 sensors, and also provides guidance for developing high-performance sensing perovskite materials.

Protective effect of Qingre Huoxue decoction against myocardial infarction via PI3K/Akt autophagy pathway based on UPLC-MS, network pharmacology, and in vivo evidence.

CONTEXT: Qingre Huoxue (QRHX) decoction, a traditional Chinese medicine, has been widely used to prevent and treat myocardial infarction (MI). OBJECTIVE: This study elucidates the possible mechanisms of QRHX in preventing or treating MI in a rat model. MATERIALS AND METHODS: The chemical constituents of QRHX were identified by UPLC-MS. Sprague-Dawley rats were randomly divided into the Sham (normal saline), Model (normal saline), QRHX-L, QRHX-M and QRHX-H group (n = 10 per group). QRHX decoction was administered by gavage to the rats for 14 days (5, 10 and 20 g/kg/day). The left anterior descending ligation method was performed to develop MI in Model and QRHX groups, and the same surgical procedures excluding ligation sutures were performed for the sham group. Finally, we evaluated cardiac function, myocardial fibrosis degree, serum inflammatory factors, autophagy levels and verified the signalling pathways in vivo. RESULTS: A total of 68 active components of QRHX corresponding to 223 active targets were obtained and 2558 MI-related disease targets were collected. After integration, 123 QRHX anti-MI targets were obtained, and 70 signalling pathways, such as PI3K/Akt, were identified by enrichment analysis. In vivo experiments suggest that QRHX could reduce the degree of myocardial fibrosis, downregulate serum inflammatory factors, and promote autophagy in MI rats. DISCUSSION AND CONCLUSIONS: QRHX plays a protective role in the myocardium by mediating PI3K/Akt signalling pathway to activate autophagy and inhibiting inflammatory factor expression. These findings provide a scientific basis for further research and validation of QRHX as a potential therapeutic for MI.

A Universal Dopant-Free Polymeric Hole-Transporting Material for Efficient and Stable All-Inorganic and Organic-Inorganic Perovskite Solar Cells.

Hole-transporting materials (HTMs) with desired properties play a crucial role in achieving efficient and stable perovskite solar cells (PSCs). However, most high-performance devices generally employ HTMs that require additional complicated doping treatments, which are harmful to the device stability. In this work, a fluorine-substituted polymer electron-donor material, PM6, is developed as a dopant-free HTM in regular all-inorganic CsPbI2Br PSCs. Benefiting from the matched energy-level alignment, high hole mobility, and effective defect passivation, a champion power conversion efficiency (PCE) of 16.06% with an ultrahigh fill factor of 82.54% is achieved for the PM6-based PSCs. Compared to doped Spiro-OMeTAD (PCE of 14.46%), PM6 significantly enhances the PCE of CsPbI2Br PSCs with negligible hysteresis owing to its more efficient charge transportation, suppressed recombination, and strong trap passivation effect. Moreover, remarkable improvements in long-term stability, thermal stability, and operational stability are all gained for the PM6-based PSCs. In addition, the successful application of PM6 as a dopant-free HTM in organic-inorganic hybrid PSCs enables an impressive PCE of 20.05% with superb device stability, manifesting the generality of the polymer donor material in various PSC systems.

Radical Form of PbI2: A New Defect Passivator for Efficient Perovskite Solar Cells.

PbI2 is a commonly used passivator for defect passivation in perovskite solar cells (PSCs). However, the poor conductivity nature of PbI2 may limit the further improvement of device performance. Here, we report a radical form of PbI2 with high conductivity to passivate defects for efficient PSCs through a combination of N,N,N',N'-tetramethylbenzidine (TMB). When PbI2 is combined with TMB, 4 orders of magnitude higher conductivity will be achieved owing to the formation of a TMB-PbI2 radical. As a result, the device performance is impressively increased from 20.48 to 22.63%. In addition, the device stability is also greatly improved and 95% of the initial efficiency is retained after aging at 85 °C for 600 h.

The Main Progress of Perovskite Solar Cells in 2020-2021.

Perovskite solar cells (PSCs) emerging as a promising photovoltaic technology with high efficiency and low manufacturing cost have attracted the attention from all over the world. Both the efficiency and stability of PSCs have increased steadily in recent years, and the research on reducing lead leakage and developing eco-friendly lead-free perovskites pushes forward the commercialization of PSCs step by step. This review summarizes the main progress of PSCs in 2020 and 2021 from the aspects of efficiency, stability, perovskite-based tandem devices, and lead-free PSCs. Moreover, a brief discussion on the development of PSC modules and its challenges toward practical application is provided.

Solution-Processed Transparent Conducting Electrodes for Flexible Organic Solar Cells with 16.61% Efficiency.

Nonfullerene organic solar cells (OSCs) have achieved breakthrough with pushing the efficiency exceeding 17%. While this shed light on OSC commercialization, high-performance flexible OSCs should be pursued through solution manufacturing. Herein, we report a solution-processed flexible OSC based on a transparent conducting PEDOT:PSS anode doped with trifluoromethanesulfonic acid (CF3SO3H). Through a low-concentration and low-temperature CF3SO3H doping, the conducting polymer anodes exhibited a main sheet resistance of 35 Ω sq-1 (minimum value: 32 Ω sq-1), a raised work function (≈ 5.0 eV), a superior wettability, and a high electrical stability. The high work function minimized the energy level mismatch among the anodes, hole-transporting layers and electron-donors of the active layers, thereby leading to an enhanced carrier extraction. The solution-processed flexible OSCs yielded a record-high efficiency of 16.41% (maximum value: 16.61%). Besides, the flexible OSCs afforded the 1000 cyclic bending tests at the radius of 1.5 mm and the long-time thermal treatments at 85 °C, demonstrating a high flexibility and a good thermal stability.

Chemical anti-corrosion strategy for stable inverted perovskite solar cells.

One big challenge for long-lived inverted perovskite solar cells (PSCs) is that commonly used metal electrodes react with perovskite layer, inducing electrode corrosion and device degradation. Motivated by the idea of metal anticorrosion, here, we propose a chemical anticorrosion strategy to fabricate stable inverted PSCs through introducing a typical organic corrosion inhibitor of benzotriazole (BTA) before Cu electrode deposition. BTA molecules chemically coordinate to the Cu electrode and form an insoluble and polymeric film of [BTA-Cu], suppressing the electrochemical corrosion and reaction between perovskite and the Cu electrode. PSCs with BTA/Cu show excellent air stability, retaining 92.8 ± 1.9% of initial efficiency after aging for 2500 hours. In addition, >90% of initial efficiency is retained after 85°C aging for over 1000 hours. PSCs with BTA/Cu also exhibit good operational stability, and 88.6 ± 2.6% of initial efficiency is retained after continuous maximum power point tracking for 1000 hours.

Origin of High Efficiency and Long-Term Stability in Ionic Liquid Perovskite Photovoltaic.

Environment-friendly protic amine carboxylic acid ionic liquids (ILs) as solvents is a significant breakthrough with respect to traditional highly coordinating and toxic solvents in achieving efficient and stable perovskite solar cells (PSCs) with a simple one-step air processing and without an antisolvent treatment approach. However, it remains mysterious for the improved efficiency and stability of PSCs without any passivation strategy. Here, we unambiguously demonstrate that the three functions of solvents, additive, and passivation are present for protic amine carboxylic acid ILs. We found that the ILs have the capability to dissolve a series of perovskite precursors, induce oriented crystallization, and chemically passivate the grain boundaries. This is attributed to the unique molecular structure of ILs with carbonyl and amine groups, allowing for strong interaction with perovskite precursors by forming C=O…Pb chelate bonds and N-H…I hydrogen bonds in both solution and film. This finding is generic in nature with extension to a wide range of IL-based perovskite optoelectronics.

Kirigami-Based Highly Stretchable Thin Film Solar Cells That Are Mechanically Stable for More than 1000 Cycles.

Exploiting stretchable solar cells that can accommodate large strain and feature high cyclic mechanical endurance is challenging for wearable and skin-interfaced electronics application. In this work, we demonstrated such solar cells using the kirigami design. Experiments and mechanical simulations showed that the kirigami structure effectively imparted stretchability to perovskite solar cells (PSCs) through out-of-plane deformation, which significantly reduced the stress in devices. The kirigami-based PSCs with optimal geometric parameters exhibited high mechanical deformability, including stretchability (strain up to 200%), twistability (angle up to 450°), and bendability (radius down to 0.5 mm). More importantly, the kirigami PSCs revealed high mechanical endurance with almost unchanged performance even after 1000 repetitive stretching, twisting, and bending cycles. This kirigami design for stretchable PSCs presented here provides a promising strategy to achieve high deformability for solar cells as well as other optoelectronic devices.