A highly efficient process to enhance the bioleaching of spent lithium-ion batteries by bifunctional pyrite combined with elemental sulfur.

Bioleaching technologies have been shown to be an environmentally friendly and economically beneficial tool for extracting metals from spent lithium-ion batteries (LIBs). However, conventional bioleaching methods have exhibited low efficiency in recovering metals from spent LIBs. Therefore, relied on the sustainability principle of using waste to treat waste, this study employed pyrite (FeS2) as an energy substance with reducing properties and investigated its effects in combination with elemental sulfur (S0) or FeSO4 on metals bioleaching from spent LIBs. Results demonstrated that the bioleaching efficiency was significantly higher in the leaching system constructed with FeS2 + S0, than in the FeS2 + FeSO4 or FeS2 system. When the pulp densities of FeS2, S0 and spent LIBs were 10 g L-1, 5 g L-1 and 10 g L-1, respectively, the leaching efficiency of Li, Ni, Co and Mn all reached 100%. Mechanistic analysis reveals that in the FeS2 + S0 system, the activity and acid-producing capabilities of iron-sulfur oxidizing bacteria were enhanced, promoting the generation of Fe (Ⅱ) and reducible sulfur compounds. Simultaneously, bio-acids were shown to disrupt the structure of the LIBs, thereby increasing the contact area between Fe (Ⅱ) and sulfur compounds containing high-valence metals. This effectively promoted the reduction of high-valence metals, thereby enhancing their leaching efficiency. Overall, the FeS2 + S0 bioleaching process constructed in this study, improved the leaching efficiency of LIBs while also effectively utilizing waste, providing technical support for the comprehensive and sustainable management of solid waste.

Feasibility of reduced iron species for promoting Li and Co recovery from spent LiCoO2 batteries using a mixed-culture bioleaching process.

The recovery of metals from spent LiCoO2 batteries (SLBs) is essential to avoid resource wastage and the production of hazardous waste. However, the major challenge in regard to recovering metals from SLBs using traditional bioleaching is the low Co yield. To overcome this issue, a mixed culture of Acidithiobacillus caldus and Sulfobacillus thermosulfidooxidans was designed for use in SLBs leaching in this study. With the assistance of Fe2+ as a reductant, 99% of Co and 100% of Li were leached using the above mixed-culture bioleaching (MCB) process, thus solving the problem of low metal leaching efficiency from SLBs. Analysis of the underlying mechanism revealed that the effective extraction of metals from SLBs by the Fe2+-MCB process relied on Fe2+-releasing electrons to reduce refractory Co(III) to Co(II) that can be easily bioleached. Finally, the hazardous SLBs was transformed into a non-toxic material after treatment utilizing the Fe2+-MCB process. However, effective SLBs leaching was not achieved by the addition of Fe0 to the MCB system. Only 25% Co and 31% Li yields were obtained, as the addition of Fe0 caused acid consumption and bacterial apoptosis. Overall, this study revealed that reductants that cause acid consumption and harm bacteria should be ruled out for use in reductant-assisted bioleaching processes for extracting metals from SLBs.

A designed moderately thermophilic consortia with a better performance for leaching high grade fine lead-zinc sulfide ore.

Unwieldy fine sulfide ores are produced during mining; without being appropriately disposed of, they can cause environmental pollution and waste resources. This study investigated the leaching performance of a moderately thermophilic consortia (Leptospirillum ferriphilum + Acidithiobacillus caldus + Sulfobacillus benefaciens) for fine lead-zinc sulfide raw ore. The results showed this microbial community created a low pH, high ORP, and high cell concentration environment for mineral leaching, improving bioleaching efficiency. Under the action of this consortia, the zinc leaching rate reached 96.44 in 8 days, and reached 100% after 12 days. EPS analysis indicated that the consortia could mediate the secretion of more polysaccharides to ensure leaching efficiency. EPS levels and amino acids were the main factors affecting bioleaching. An analysis of mineral surface characteristics showed the consortia effectively leached pyrite and sphalerite from the fine sulfide ore, and prevented the mineral surface forming the jarosite that could hinder bioleaching. This study found that bioleaching reduced the potential environmental toxicity of the minerals, providing an important reference for guiding the bioleaching of unwieldy fine sulfide raw ore.

Effect of diurnal temperature range on bioleaching of sulfide ore by an artificial microbial consortium.

Temperature is considered to be one of the main factors affecting bioleaching, but few studies have assessed the effects of diurnal temperature range (DTR) on the bioleaching process. This study investigates the effects of different bioleaching temperatures (30 and 40 °C) and DTR on the bioleaching of metal sulfide ores by microbial communities. The results showed that DTR had an obvious inhibitory effect on the bioleaching efficiency of the artificial microbial community, although this effect was mainly concentrated in the early and middle stages (0-18 days) of exposure, gradually decreasing until almost disappearing in the late stage (18-24 days). Extracellular polymeric substance (EPS) analysis showed that DTR did not change the composition of the EPS matrix (humic acid-like substances, polysaccharides and protein-like substances), but had a significant effect on the generative behavior of EPS, inhibiting the secretion of EPS during the early and middle stages of the bioleaching process. However, the continual increase in EPS secretion in the bioleaching system gradually reduced the adverse effects of DTR on mineral dissolution. X-ray diffraction (XRD), Fourier transform infrared (FTIR) and Scanning electron microscopy- energy dispersive spectrometry (SEM-EDS) analysis of the bioleached residue showed that DTR had no obvious effect on the mineralogical characteristics of sulfide ore. Therefore, in industrial sulfide ore bioleaching applications, in order to accelerate the artificial microbial community start-up process, temperature control measures should be increased in the bioleaching process to reduce the adverse effects of DTR on mineral dissolution.

Determination of oligosaccharides and monosaccharides in Hakka rice wine by precolumn derivation high-performance liquid chromatography.

This article presents a precolumn derivatization procedure with 1-phenyl-3-methyl-5-pyrazolone (PMP) reagent to detect oligosaccharides and monosaccharides in Hakka rice wine. The subsequent separation of the derivatized glucose-PMP also was performed using a mobile phase consisting of the molar ratio of acetonitrile to ammonium acetate buffer (0.1M) of 22:78 at a flow rate of 1.0 mL/min with the column temperature of 35°C, and the pH of ammonium acetate buffer at 5.5. The optimum derivation conditions were as follows: reaction temperature, 70°C; reaction time, 30 minutes; molar ratio of PMP to glucose, 10:1 (v/v); molar ratio of sodium hydroxide to glucose, 3:1 (v/v). The recovery rates were between 93.13% and 102.08% with relative standard deviation of 0.96-2.48%. The established method provides sufficient sensitivity with values of limit of detection of 0.09-0.26 mg/L and limit of quantification of 0.27-0.87 mg/L for determination of oligosaccharides and monosaccharides.