Symbiotic defect-reinforced bimetallic MOF-derived fiber components for solar-assisted atmospheric water collection.

Conversion of atmospheric water to sustainable and clean freshwater resources through MOF-based adsorbent has great potential for the renewable environmental industry. However, its daily water production is hampered by susceptibility to agglomeration, slow water evaporation efficiency, and limited water-harvesting capacity. Herein, a solar-assisted bimetallic MOF (BMOF)-derived fiber component that surmounts these limitations and exhibits both optimized water-collect capacity and short adsorption-desorption period is proposed. The proposed strategy involves utilizing bottom-up interface-induced assembly between carboxylated multi-walled carbon nanotube and hygroscopic BMOF on a multi-ply glass fiber support. The designed BMOF (MIL-100(Fe,Al)-3) skeleton constructed using bimetallic-node defect engineering exhibits a high specific surface area (1,535.28 m2/g) and pore volume (0.76 cm3/g), thereby surpassing the parent MOFs and other reported MOFs in capturing moisture. Benefiting from the hierarchical structure of fiber rods and the solar-driven self-heating interface of photothermal layer, the customized BMOF crystals realize efficient loading and optimized water adsorption-desorption kinetics. As a result, the resultant fiber components achieve six adsorption-desorption cycles per day and an impressive water collection of 1.45 g/g/day under medium-high humidity outdoor conditions. Therefore, this work will provide new ideas for optimizing the daily yield of atmospheric water harvesting techniques.

A Functionally Asymmetric Janus Hygro-Photothermal Hybrid for Atmospheric Water Harvesting in Arid Regions.

Metal-organic frameworks (MOFs) are high-performance adsorbents for atmospheric water harvesting but have poor water-desorption ability, requiring excess energy input to release the trapped water. Addressing this issue, a Janus-structured adsorbent with functional asymmetry is presented. The material exhibits contrasting functionalities on either face - a hygroscopic face interfaced with a photothermal face. Hygroscopic aluminum fumarate MOF and photothermal CuxS layers are in-situ grown on opposite sides of a Cu/Al bimetallic substrate, resulting in a CuxS-Cu/Al-MOF Janus hygro-photothermal hybrid. The two faces serve as independent "factories" for photothermal conversion and water adsorption-desorption respectively, while the interfacing bimetallic layer serves as a "heat conveyor belt" between them. Due to the high porosity and hydrophilicity of the MOF, the hybrid exhibits a water-adsorption capacity of 0.161 g g-1 and a fast adsorption rate (saturation within 52 min) at 30% relative humidity. Thanks to the photothermal CuxS, the hybrid can reach 71.5 °C under 1 Sun in 20 min and desorb 97% adsorbed water in 40 min, exhibiting a high photothermal conversion efficiency of over 90%. CuxS-Cu/Al-MOF exhibits minimal fluctuations after 200 cycles, and its water-generation capacity is 3.21 times that of powdery MOF in 3 h in a self-designed prototype in one cycle.

Bimetallic MOF-Derived Solar-Triggered Monolithic Adsorbent for Enhanced Atmospheric Water Harvesting.

The development of economical, energy-saving, and efficient metal-organic framework (MOF)-based adsorbents for atmospheric water collection is highly imperative for the rapid advancement of renewable freshwater resource exploitation. Herein, a feasible one-step solvothermal formation strategy of bimetallic MOF (BMOF) is proposed and applied to construct a solar-triggered monolithic adsorbent for enhanced atmospheric water collection. Benefiting from the reorganization and adjustment of topology structure by Al atoms and Fe atoms, the resultant BMOF(3) consisting of Al-fumarate and MIL-88A has a higher specific surface area (1202.99 m2  g-1 ) and pore volume (0.51 cm3  g-1 ), thereby outperforming the parental MOFs and other potential MOFs in absorbing water. Expanding upon this finding, the solar-triggered monolithic adsorbent is further developed through a bottom-up assembly of polyaniline/chitosan layers and hybridized BMOF(3) skeletons on a glass fiber support. The resultant monolithic adsorbent exhibits superior sorption-desorption kinetics, leading to directional water transport and rapid solar-assisted vapor diffusion. As a proof-of-concept demonstration, an exquisite water harvester is constructed to emphasize a high water yield of 1.19 g g-1 per day of the designed monolithic adsorbent. Therefore, the design and validation of bimetallic MOF-derived solar-triggered adsorbent in this work are expected to provide a reference for the large-scale applications of MOF-based atmospheric water harvesting.