Coral micro- and macro-morphological skeletal properties in response to life-long acclimatization at CO2 vents in Papua New Guinea.

This study investigates the effects of long-term exposure to OA on skeletal parameters of four tropical zooxanthellate corals naturally living at CO2 seeps and adjacent control sites from two locations (Dobu and Upa Upasina) in the Papua New Guinea underwater volcanic vent system. The seeps are characterized by seawater pH values ranging from 8.0 to about 7.7. The skeletal porosity of Galaxea fascicularis, Acropora millepora, massive Porites, and Pocillopora damicornis was higher (up to ~ 40%, depending on the species) at the seep sites compared to the control sites. Pocillopora damicornis also showed a decrease of micro-density (up to ~ 7%). Thus, further investigations conducted on this species showed an increase of the volume fraction of the larger pores (up to ~ 7%), a decrease of the intraskeletal organic matrix content (up to ~ 15%), and an increase of the intraskeletal water content (up to ~ 59%) at the seep sites. The organic matrix related strain and crystallite size did not vary between seep and control sites. This multi-species study showed a common phenotypic response among different zooxanthellate corals subjected to the same environmental pressures, leading to the development of a more porous skeletal phenotype under OA.

Characterization of Structural Bone Properties through Portable Single-Sided NMR Devices: State of the Art and Future Perspectives.

Nuclear Magnetic Resonance (NMR) is a well-suited methodology to study bone composition and structural properties. This is because the NMR parameters, such as the T2 relaxation time, are sensitive to the chemical and physical environment of the 1H nuclei. Although magnetic resonance imaging (MRI) allows bone structure assessment in vivo, its cost limits the suitability of conventional MRI for routine bone screening. With difficulty accessing clinically suitable exams, the diagnosis of bone diseases, such as osteoporosis, and the associated fracture risk estimation is based on the assessment of bone mineral density (BMD), obtained by the dual-energy X-ray absorptiometry (DXA). However, integrating the information about the structure of the bone with the bone mineral density has been shown to improve fracture risk estimation related to osteoporosis. Portable NMR, based on low-field single-sided NMR devices, is a promising and appealing approach to assess NMR properties of biological tissues with the aim of medical applications. Since these scanners detect the signal from a sensitive volume external to the magnet, they can be used to perform NMR measurement without the need to fit a sample inside a bore of a magnet, allowing, in principle, in vivo application. Techniques based on NMR single-sided devices have the potential to provide a high impact on the clinical routine because of low purchasing and running costs and low maintenance of such scanners. In this review, the development of new methodologies to investigate structural properties of trabecular bone exploiting single-sided NMR devices is reviewed, and current limitations and future perspectives are discussed.

Single-sided NMR to estimate morphological parameters of the trabecular bone structure.

PURPOSE: Single-sided 1 H-NMR is proposed for the estimation of morphological parameters of trabecular bone, and potentially the detection of pathophysiological alterations of bone structure. In this study, a new methodology was used to estimate such parameters without using an external reference signal, and to study intratrabecular and intertrabecular porosities, with a view to eventually scanning patients. METHODS: Animal trabecular bone samples were analyzed by a single-sided device. The Carr-Purcell-Meiboom-Gill sequence of 1 H nuclei of fluids, including marrow, confined inside the bone, was analyzed by quasi-continuous T2 distributions and separated into two 1 H pools: short and long T2 components. The NMR parameters were estimated using models of trabecular bone structure, and compared with the corresponding micro-CT. RESULTS: Without any further assumptions, the internal reference parameter (short T2 signal intensity fraction) enabled prediction of the micro-CT parameters BV/TV (volume of the trabeculae/total sample volume) and BS/TV (external surface of the trabeculae/total sample volume) with linear correlation coefficient >0.80. The assignment of the two pools to intratrabecular and intertrabecular components yielded an estimate of average intratrabecular porosity (33 ± 5)%. Using the proposed models, the NMR-estimated BV/TV and BS/TV were found to be linearly related to the corresponding micro-CT values with high correlation (>0.90 for BV/TV; >0.80 for BS/TV) and agreement coefficients. CONCLUSION: Low-field, low-cost portable devices that rely on intrinsic magnetic field gradients and do not use ionizing radiation are viable tools for in vitro preclinical studies of pathophysiological structural alterations of trabecular bone.

Along-tract analysis of the arcuate fasciculus using the Laplacian operator to evaluate different tractography methods.

PURPOSE: We propose a new along-tract algorithm to compare different tractography algorithms in tract curvature mapping and along-tract analysis of the arcuate fasciculus (AF). In particular, we quantified along-tract diffusion parameters and AF spatial distribution evaluating hemispheric asymmetries in a group of healthy subjects. METHODS: The AF was bilaterally reconstructed in a group of 29 healthy subjects using the probabilistic ball-and-sticks model, and both deterministic and probabilistic constrained spherical deconvolution. We chose cortical ROIs as tractography targets and the developed along-tract algorithm used the Laplacian operator to parameterize the volume of the tract, allowing along-tract analysis and tract curvature mapping independent of the tractography algorithm used. RESULTS: The Laplacian parameterization successfully described the tract geometry underlying hemispheric asymmetries in the AF curvature. Using the probabilistic tractography methods, we found more tracts branching towards cortical terminations in the left hemisphere. This influenced the left AF curvature and its diffusion parameters, which were significantly different with respect to the right. In particular, we detected projections towards the middle temporal and inferior frontal gyri bilaterally, and towards the superior temporal and precentral gyri in the left hemisphere, with a significantly increased volume and connectivity. CONCLUSIONS: The approach we propose is useful to evaluate brain asymmetries, assessing the volume, the diffusion properties and the quantitative spatial localization of the AF.

Bone volume-to-total volume ratio measured in trabecular bone by single-sided NMR devices.

PURPOSE: Reduced bone strength is associated with a loss of bone mass, usually evaluated by dual-energy X-ray absorptiometry, although it is known that the bone microstructure also affects the bone strength. Here, a method is proposed to measure (in laboratory) the bone volume-to-total volume ratio by single-sided NMR scanners, which is related to the microstructure of the trabecular bone. METHODS: Three single-sided scanners were used on animal bone samples. These low-field, mobile, low-cost devices are able to detect the NMR signal, regardless of the sample sizes, without the use of ionizing radiations, with the further advantage of signal localization offered by their intrinsic magnetic field gradients. RESULTS: The performance of the different single-sided scanners have been discussed. The results have been compared with bone volume-to-total volume ratio by micro CT and MRI, obtaining consistent values. CONCLUSIONS: Our results demonstrate the feasibility of the method for laboratory analyses, which are useful for measurements like porosity on bone specimens. This can be considered as the first step to develop an NMR method based on the use of a mobile single-sided device, for the diagnosis of osteoporosis, through the acquisition of the signal from the appendicular skeleton, allowing for low-cost, wide screening campaigns. Magn Reson Med 79:501-510, 2018. © 2017 International Society for Magnetic Resonance in Medicine.

An Environmental Friendly Fluorinated Oligoamide for Producing Nonwetting Coatings with High Performance on Porous Surfaces.

The changes in the surface wettability of many materials are receiving increased attention in recent years. It is not too hard to fabricate resistant hydrophobic surfaces through products bearing both hydrophobic and reactive hydrophilic end groups. More challenging is obtaining resistant nonwetting surfaces through noncovalent reversible bonds. In this work, a fluorinated oligo(ethylenesuccinamide), soluble in solvent benign for operators and environment, has been synthesized. It contains two opposite functional groups (perfluoropolyether segments and amidic groups) (SC2-PFPE) that provide water repellency while hydrophilicity is retained. Its performance has been tested on porous calcarenite and investigated by magnetic resonance imaging, water capillary absorption, and vapor diffusivity tests. The results demonstrate that SC2-PFPE modifies the wettability of porous substrates in a drastic and durable way and reduces the vapor condensation inside the pore space due to the perfluoropolyether segments that act at the air/surface interface.

The effect of diffusion gradient direction number on corticospinal tractography in the human brain: an along-tract analysis.

OBJECTIVES: We evaluated diffusion imaging measures of the corticospinal tract obtained with a probabilistic tractography algorithm applied to data of two acquisition protocols based on different numbers of diffusion gradient directions (NDGDs). MATERIALS AND METHODS: The corticospinal tracts (CST) of 18 healthy subjects were delineated using 22 and 66-NDGD data. An along-tract analysis of diffusion metrics was performed to detect possible local differences due to NDGD. RESULTS: FA values at 22-NDGD showed an increase along the central portion of the CST. The mean of partial volume fraction of the orientation of the second fiber (f2) was higher at 66-NDGD bilaterally, because for 66-NDGD data the algorithm more readily detects dominant fiber directions beyond the first, thus the increase in FA at 22-NDGD is due to a substantially reduced detection of crossing fiber volume. However, the good spatial correlation between the tracts drawn at 22 and 66 NDGD shows that the extent of the tract can be successfully defined even at lower NDGD. CONCLUSIONS: Given the spatial tract localization obtained even at 22-NDGD, local analysis of CST can be performed using a NDGD compatible with clinical protocols. The probabilistic approach was particularly powerful in evaluating crossing fibers when present.

Shell properties of commercial clam Chamelea gallina are influenced by temperature and solar radiation along a wide latitudinal gradient.

Phenotype can express different morphologies in response to biotic or abiotic environmental influences. Mollusks are particularly sensitive to different environmental parameters, showing macroscale shell morphology variations in response to environmental parameters. Few studies concern shell variations at the different scale levels along environmental gradients. Here, we investigate shell features at the macro, micro and nanoscale, in populations of the commercially important clam Chamelea gallina along a latitudinal gradient (~400 km) of temperature and solar radiation in the Adriatic Sea (Italian cost). Six populations of clams with shells of the same length were analyzed. Shells from the warmest and the most irradiated population were thinner, with more oval shape, more porous and lighter, showing lower load fracture. However, no variation was observed in shell CaCO3 polymorphism (100% aragonite) or in compositional and textural shell parameters, indicating no effect of the environmental parameters on the basic processes of biomineralization. Because of the importance of this species as commercial resource in the Adriatic Sea, the experimentally quantified and significant variations of mass and fracture load in C. gallina shells along the latitudinal gradient may have economic implications for fisheries producing different economical yield for fishermen and consumers along the Adriatic coastline.

Gains and losses of coral skeletal porosity changes with ocean acidification acclimation.

Ocean acidification is predicted to impact ecosystems reliant on calcifying organisms, potentially reducing the socioeconomic benefits these habitats provide. Here we investigate the acclimation potential of stony corals living along a pH gradient caused by a Mediterranean CO2 vent that serves as a natural long-term experimental setting. We show that in response to reduced skeletal mineralization at lower pH, corals increase their skeletal macroporosity (features >10 µm) in order to maintain constant linear extension rate, an important criterion for reproductive output. At the nanoscale, the coral skeleton's structural features are not altered. However, higher skeletal porosity, and reduced bulk density and stiffness may contribute to reduce population density and increase damage susceptibility under low pH conditions. Based on these observations, the almost universally employed measure of coral biomineralization, the rate of linear extension, might not be a reliable metric for assessing coral health and resilience in a warming and acidifying ocean.

Isotropic microscale mechanical properties of coral skeletons.

Scleractinian corals are a major source of biogenic calcium carbonate, yet the relationship between their skeletal microstructure and mechanical properties has been scarcely studied. In this work, the skeletons of two coral species:solitary Balanophyllia europaea and colonial Stylophora pistillata, were investigated by nanoindentation. The hardness HIT and Young's modulus E(IT) were determined from the analysis of several load-depth data on two perpendicular sections of the skeletons: longitudinal (parallel to the main growth axis) and transverse. Within the experimental and statistical uncertainty,the average values of the mechanical parameters are independent on the section's orientation. The hydration state of the skeletons did not affect the mechanical properties. The measured values, EIT in the 76-77 GPa range, and H(IT) in the 4.9­5.1 GPa range, are close to the ones expected for polycrystalline pure aragonite. Notably, a small difference in H(IT) is observed between the species. Different from corals, single-crystal aragonite and the nacreous layer of the seashell Atrina rigida exhibit clearly orientation-dependent mechanical properties. The homogeneous and isotropic mechanical behaviour of the coral skeletons at the microscale is correlated with the microstructure,observed by electron microscopy and atomic force microscopy, and with the X-ray diffraction patterns of the longitudinal and transverse sections.

Stone porosity, wettability changes and other features detected by MRI and NMR relaxometry: a more than 15-year study.

Scientists applying magnetic resonance techniques to cultural heritage are now a quite vast and international community, even if these applications are not yet well known outside this community. Not only laboratory experiments but also measurements in the field are now possible, with the use of portable nuclear magnetic resonance (NMR) instruments that enable non-invasive and non-destructive studies on items of any size, of high artistic and historical value as well as diagnosis of their conservation state. The situation was completely different in the second half of the 1990s when our group started working on applications of NMR to cultural heritage, by combining the knowledge of NMR for fluids in porous media at the University of Bologna, with the skilfulness of the chemists for cultural heritage of CNR and University of Florence, and Safeguarding Cultural Heritage Department of Aosta. Since then, our interest has been mainly devoted to develop methods to study the structure of pore space and their changes as a result of the decay, as well as to evaluate performance of the protective and conservative treatments of porous materials like stone, ceramic, cements and wood. In this paper, we will review the pathway that led us from the first tentative experiments, in the second half of the 1990s to the current work on these topics.

Nano and sub-nano multiscale porosity formation and other features revealed by 1H NMR relaxometry during cement hydration.

Cement hydration occurs when water is added to cement powder, leading to the formation of crystalline products like Portlandite and the quasi-amorphous, poorly crystalline, calcium silicate hydrate (C-S-H) gel. Despite its importance in determining the final properties of the cement, many models exist for the nano and sub-nano level organization of this "liquid stone." (1)H NMR relaxometry in White Portland Cement paste during hydration allowed us to monitor the formation and evolution of the multiscale porosity of the cement, with the formation of structures at nano and sub-nano levels of C-S-H gel (calcium silicate interlayer water, water in small and large gel pores) along with three low-mobility (1)H pools, identified as (1)H nuclei in C-S-H layers, likely belonging to OH groups, with (1)H nuclei in Portlandite, and in crystal water of Ettringite. By assuming these assignments, our data allowed us to compute the distances of pairs of (1)H nuclei in Portlandite and in crystal water ((1.9 ± 0.2) Å and (1.6 ± 0.1) Å, respectively), consistent with the known values of these distances. The picture of the porous structure at nano and sub-nano levels emerging from our results is consistent with the Jennings colloidal model for C-S-H gel. Moreover, the constant values observed during hydration of parameters extracted from our data analysis strongly support that model, being compatible with the picture of C-S-H gel developing in comparable-sized clumps of the same composition, but not easily interpretable by models proposing quasi continuous sheets of C-S-H layers.

Biomineralization control related to population density under ocean acidification.

Anthropogenic CO2 is a major driver of current environmental change in most ecosystems1, and the related ocean acidification (OA) is threatening marine biota2. With increasing pCO2, calcification rates of several species decrease3, although cases of up-regulation are observed4. Here, we show that biological control over mineralization relates to species abundance along a natural pH gradient. As pCO2 increased, the mineralogy of a scleractinian coral (Balanophyllia europaea) and a mollusc (Vermetus triqueter) did not change. In contrast, two calcifying algae (Padina pavonica and Acetabularia acetabulum) reduced and changed mineralization with increasing pCO2, from aragonite to the less soluble calcium sulphates and whewellite, respectively. As pCO2 increased, the coral and mollusc abundance was severely reduced, with both species disappearing at pH < 7.8. Conversely, the two calcifying and a non-calcifying algae (Lobophora variegata) showed less severe or no reductions with increasing pCO2, and were all found at the lowest pH site. The mineralization response to decreasing pH suggests a link with the degree of control over the biomineralization process by the organism, as only species with lower control managed to thrive in the lowest pH.

A time-domain nuclear magnetic resonance study of Mediterranean scleractinian corals reveals skeletal-porosity sensitivity to environmental changes.

Mediterranean corals are a natural model for studying global warming, as the Mediterranean basin is expected to be one of the most affected regions and the increase in temperature is one of the greatest threats for coral survival. We have analyzed for the first time with time-domain nuclear magnetic resonance (TD-NMR) the porosity and pore-space structure, important aspects of coral skeletons, of two scleractinian corals, Balanophyllia europaea (zooxanthellate) and Leptopsammia pruvoti (nonzooxanthellate), taken from three different sites on the western Italian coast along a temperature gradient. Comparisons have been made with mercury intrusion porosimetry and scanning electron microscopy images. TD-NMR parameters are sensitive to changes in the pore structure of the two coral species. A parameter, related to the porosity, is larger for L. pruvoti than for B. europaea, confirming previous non-NMR results. Another parameter representing the fraction of the pore volume with pore sizes of less than 10-20 µm is inversely related, with a high degree of statistical significance, to the mass of the specimen and, for B. europaea, to the temperature of the growing site. This effect in the zooxanthellate species, which could reduce its resistance to mechanical stresses, may depend on an inhibition of the photosynthetic process at elevated temperatures and could have particular consequences in determining the effects of global warming on these species.

Analysis of inter-fraction setup errors and organ motion by daily kilovoltage cone beam computed tomography in intensity modulated radiotherapy of prostate cancer.

BACKGROUND: Intensity-modulated radiotherapy (IMRT) enables a better conformality to the target while sparing the surrounding normal tissues and potentially allows to increase the dose to the target, if this is precisely and accurately determined. The goal of this work is to determine inter-fraction setup errors and prostate motion in IMRT for localized prostate cancer, guided by daily kilovoltage cone beam computed tomography (kVCBCT). METHODS: Systematic and random components of the shifts were retrospectively evaluated by comparing two matching modalities (automatic bone and manual soft-tissue) between each of the 641 daily kVCBCTs (18 patients) and the planning kVCT. A simulated Adaptive Radiation Therapy (ART) protocol using the average of the first 5 kVCBCTs was tested by non-parametric bootstrapping procedure. RESULTS: Shifts were < 1 mm in left-right (LR) and in supero-inferior (SI) direction. In antero-posterior (AP) direction systematic prostate motion (2.7 ± 0.7 mm) gave the major contribution to the variability of results; the averages of the absolute total shifts were significantly larger in anterior (6.3 ± 0.2 mm) than in posterior (3.9 mm ± 0.2 mm) direction. The ART protocol would reduce margins in LR, SI and anterior but not in posterior direction. CONCLUSIONS: The online soft-tissue correction based on daily kVCBCT during IMRT of prostate cancer is fast and efficient. The large random movements of prostate respect to bony anatomy, especially in the AP direction, where anisotropic margins are needed, suggest that daily kVCBCT is at the present time preferable for high dose and high gradients IMRT prostate treatments.

Nanopore structure buildup during endodontic cement hydration studied by time-domain nuclear magnetic resonance of lower and higher mobility 1H.

Time-domain nuclear magnetic resonance (TD-NMR) of (1)H nuclei has been used to monitor and model changes of endodontic cement pastes during hydration, from the initial reaction period up to hours and days. The (1)H in the samples are divided into two major spin groups by fitting each free induction decay, acquired after the second pulse of an inversion recovery (I-R) pulse sequence with variable interpulse delay, by the sum of a quasi-Gaussian (signal from low mobility nuclei) and an exponential (from higher mobility nuclei). The extrapolations to zero time of the signals from the two spin groups give two sets of I-R data that have been analyzed to give quasi-continuous T(1) distributions. After about a day, two clearly solid components appear. From a day to a few days, three liquid populations are identified, one of them mainly in the low-mobility spin group, which later merge, giving a single T(1) or T(2) peak. The rapid onset of the solid components, at the cost of the liquid, and the rapid changes of the relaxation time distributions of all components are clear indicators of the amount and kinetics of reaction products formation (C-S-H gel and Portlandite) and of the C-S-H micronanoporous structure buildup and evolution. At 30 days of hydration, the very short T(1) and T(2) liquid component (T(1) congruent with 200 micros and T(2) congruent with 50 micros) can be assigned to C-S-H intralayer water (thickness of the order of fractions of a nanometer) and the remaining liquid signal to interlayer water (thickness of the order of 1 nm). Comparisons are made among a widely used commercial endodontic cement paste and two more recent commercial pastes, with additive compounds to make the hydration process faster and to increase the workability. Parameters can be extracted from the data to characterize the different kinetics and nanostructure of the pore space formed up to 30 days. The parameters are in agreement with the expected effects of the additives, so the parameters can be used to optimize the formulation of new pastes, in order to improve their therapeutic performance.

Inhomogeneity of rat vertebrae trabecular architecture by high-field 3D mu-magnetic resonance imaging and variable threshold image segmentation.

PURPOSE: To analyze the 3D microarchitecture of rat lumbar vertebrae by micro-magnetic resonance imaging (micro-MRI). MATERIALS AND METHODS: micro-MR images (20 x 20 x 20 microm(3) apparent voxel size) were acquired with a three-dimensional spin-echo pulse sequence on four lumbar vertebrae of two rats. Apparent microarchitectural parameters like trabecular bone fraction (BV/TV), specific bone surface (BS/TV), mean intercept length (MIL), and Euler number per unit volume (Euler density, E(V)) were calculated using a novel semiquantitative variable threshold segmentation technique. The threshold value T was obtained as a point of minimum or maximum of the function E(V) = E(V)(T). RESULTS: Quantitative 3D analysis of micro-MRI images revealed a higher connectivity in the peripheral regions (E(V) = -570 +/- 70 mm(-3)) than in the central regions (E(V) = -130 +/- 50 mm(-3)) of the analyzed rat lumbar vertebrae. Smaller intertrabecular cavities and larger bone volume fractions were observed in peripheral regions as compared to central ones (MIL = 0.18 +/- 0.01 mm and 0.26 +/- 0.01 mm; BV/TV = 34 +/- 3% and 29 +/- 3%, respectively). The quantitative 3D study of MIL showed a structural anisotropy of the trabeculae along the longitudinal axis seen on the images. The inhomogeneity of the bone architecture was validated by micro-computed tomography (micro-CT) images at the same spatial resolution. CONCLUSION: 3D high-field micro-MRI is a suitable technique for the assessment of bone quality in experimental animal models.

Water vapor absorption in porous media polluted by calcium nitrate studied by time domain nuclear magnetic resonance.

Nuclear magnetic resonance relaxation analysis of liquid water (1)H nuclei in real porous media, selected for their similar composition (carbonate rocks) and different pore space architecture, polluted with calcium nitrate, is presented to study the kinetics of water condensation and salt deliquescence inside the pore space. These phenomena are responsible for deterioration of porous materials when exposed to environmental injury by pollution in a humid atmosphere. The theory is well described for simple pore geometries, but it is not yet well understood in real porous media with wide distributions of pore sizes and connections. The experiment is performed by following in time the formation of liquid water inside the pore space by T(1) and T(2) relaxation time distributions. The distributions allow one to see the effects of both the salt concentration and the pore space structure on the amount of water vapor condensed and its kinetics. It is shown that, for a given lithotype, even with different amounts of pollutant, the rate-average relaxation time T(1ra) tends to increase monotonically with NMR signal, proportional to the amount of liquid water. T(1ra) is often inversely associated with surface-to-volume ratio. This suggests a trend toward the filling of larger pores as amounts of liquid water increase, but it does not indicate a strict sequential filling of pores in order of size and starting with the smallest; in fact, relaxation time distributions show clearly that this is not the case. Increased amounts of salt lead to both markedly increased rates and markedly increased amounts of water absorption. NMR measurements of amounts of water, together with relaxation time distributions, give the possibility of information on the effect of pollution in porous materials exposed to humid atmospheres but sheltered from liquid water, even before the absorption of large amounts of moisture and subsequent damage. These phenomena are of importance also in other fields, such as the exploitation of geothermal energy.

Nuclear magnetic resonance for cultural heritage.

Nuclear magnetic resonance (NMR) portable devices are now being used for nondestructive in situ analysis of water content, pore space structure and protective treatment performance in porous media in the field of cultural heritage. It is a standard procedure to invert T(1) and T(2) relaxation data of fully water-saturated samples to get "pore size" distributions, but the use of T(2) requires great caution. It is well known that dephasing effects due to water molecule diffusion in a magnetic field gradient can affect transverse relaxation data, even if the smallest experimentally available half echo time tau is used in Carr-Purcell-Meiboom-Gill experiments. When a portable single-sided NMR apparatus is used, large field gradients due to the instrument, at the scale of the sample, are thought to be the dominant dephasing cause. In this paper, T(1) and T(2) (at different tau values) distributions were measured in natural (Lecce stone) and artificial (brick samples coming from the Greek-Roman Theatre of Taormina) porous media of interest for cultural heritage by a standard laboratory instrument and a portable device. While T(1) distributions do not show any appreciable effect from inhomogeneous fields, T(2) distributions can show strong effects, and a procedure is presented based on the dependence of 1/T(2) on tau to separate pore-scale gradient effects from sample-scale gradient effects. Unexpectedly, the gradient at the pore scale can be, in some cases, strong enough to make negligible the effects of gradients at the sample scale of the single-sided device.