The Effect of Photobiomodulation Therapy on the Stability of Orthodontic Mini-implants in Human and Animal Studies: A Systematic Review and Meta-analysis.

Introduction: The present study aimed to systematically explore available literature on the possible impact of photobiomodulation (PBM) therapy on the stability and success of orthodontic mini-implants. Methods: A comprehensive electronic search was conducted in PubMed, ISI Web of Science, Scopus, Cochrane and Embase databases for human and animal studies published until July 2021. Two independent researchers reviewed the studies based on specific eligibility criteria. Results: 15 studies were included in the systematic review after a comprehensive search. Ten studies were included in the meta-analysis. Four were human RCT studies that evaluated the stability with Preriotest. Three other human RCT studies and two animal studies had evaluated the Implant stability quotient (ISQ). Two human RCTs that had evaluated displacement of mini-implants were also analyzed. The analysis of Periotest stability results showed a positive effect of PBM on mini-implant stability at 30 and 60 days after implantation (P<0.05). In human studies using the ISQ method, a slight improvement was seen in the PBM groups; however, this was not statistically significant (CI=-1.92-2.70, SMD=0.39). In studies that examined the displacement of mini-implants, no statistically significant difference was observed between irradiated and non-irradiated groups (CI=-1.92-2.70, SMD=0.03). According to the results of animal studies, which had used the ISQ method, the use of laser was statistically effective in increasing the stability of mini-implants (SMD=1.43, CI=1.00-1.85). Conclusion: PBM therapy can be suggested as an adjunctive clinical method to improve the stability of mini-implant treatment. Further well-designed clinical studies can help establish evidence-based dosing and irradiation protocols.

The effect of intra-oral LED device and low-level laser therapy on orthodontic tooth movement in young adults: A randomized controlled trial.

INTRODUCTION: This randomized controlled clinical trial aimed to assess the effect of LED5 and LLLT6 in a three-arm parallel setting. METHODS: Sixty patients who needed the maxillary first premolar extraction were allocated to three groups using the stratified block randomization method. In the LED group, a custom-made device with a wavelength of 640nm and a power density of 40 mW/cm2 was used 5min/day. In the laser group, Ga Al As7 laser with a wavelength of 810nm and a power of 100 mW was used on days 0, 3, 30, and 60 each time for 18seconds. Patients in the control group received placebo treatment as the laser group protocol, using a coated light cure device. Models were made at baseline and monthly until the end of the retraction. The rate of canine retraction was the primary outcome, while canine rotation and pain were secondary outcomes. The final data were anonymous for the outcome assessor and statistical consultant. Data were analyzed per protocol using a linear mixed model. RESULTS: The rate of canine retraction significantly increased by 60.8% in the laser group, while it increased not significantly by 26% in the LED group compared with the control group. There was no significant difference among the groups in terms of tooth rotation and pain. CONCLUSIONS: LLLT can accelerate orthodontic tooth movement (OTM). LED with the present setting couldn't increase the rate of OTM. LLLT and LED did not affect canine rotation or pain. TRIAL REGISTRATION: IRCT20120220009086N4. On 1 June 2019 was retrospectively registered.

Relationship of Frontal Sinus Size and Maturation of Cervical Vertebrae for Assessment of Skeletal Maturity.

OBJECTIVES: This study aimed to assess the relationship of frontal sinus height and width with the cervical vertebral maturation (CVM) for assessment of skeletal maturity. MATERIALS AND METHODS: This retrospective study evaluated lateral cephalograms of 132 patients between 8 to 21 years, including 66 males and 66 females. For each of the six stages of the CVM, 22 patients (11 males and 11 females) were evaluated. The Ertuk's method was used to measure the height and width of the frontal sinus. The sinus height to width ratio was calculated and considered as the sinus index. The CVM was evaluated on the same lateral cephalograms using the Baccetti's method. The correlation of frontal sinus height and width with the CVM was analyzed, and comparisons were made using independent t-test, ANOVA, Mann-Whitney test, and Kendall's tau-b correlation coefficient. RESULTS: The sinus width was 10.85±2.7 mm in males and 9.47±2.6 mm in females. The sinus index was 2.43±0.37 in males and 2.66±0.32 in females (P<0.000). The frontal sinus index and width were significantly greater in males but the sinus length was not significantly different between males and females (P=0.383). Significant differences were found in stages 2 and 3, and also 4 and 5 in females and 2 and 3, 3 and 4, and 4 and 5 in males. The mean frontal sinus index had a significant correlation with the CVM stage in both groups. CONCLUSION: According to the results, the frontal sinus index cannot be used as a predictor of skeletal maturity.

Effects of facemasks versus intraoral appliances in treating maxillary deficiency in growing patients: A systematic review and meta-analysis.

BACKGROUND: Class III malocclusion is one the most challenging types of orthodontic problems. OBJECTIVES: The aim of this study was to compare the dentoskeletal effects of facemasks and intraoral appliances in treating class III maxillary deficiency in growing patients through a systematic review of the available literature. MATERIAL AND METHODS: Electronic and manual searches were performed in the Cochrane Central Register of Controlled Trials (CENTRAL), the Cochrane Database of Systematic Reviews (CDSR), MEDLINE (PubMed), Embase (OVID), and Scopus to find all the relevant studies published by January 2018. All randomized controlled trials (RCTs) recruiting 5-12-year-old patients who received maxillary protraction treatment with any type of facemask and comparing the facemasks with any type of intraoral appliance were included. The primary outcome measure was changes in the A point-nasion-B point angle (ANB), and the secondary outcomes included changes in the overjet, upper-1 (U1) inclination, the mandibular plane angle, and treatment time. The meta-analysis was carried out using the inverse variance-weighted random effects model. RESULTS: Out of 1,629 articles found in the initial search, 5 studies met the inclusion criteria. The meta-analysis showed no differences in the duration of treatment or in any of the cephalometric variables, with the exception of the overjet. CONCLUSIONS: It seems that intraoral appliances and facemasks are similar in terms of dentoskeletal effects in the treatment of class III malocclusion as well as treatment duration. However, due to a lack of a sufficient number of high-quality studies, these results should be viewed with caution. Further high-quality, long-term studies are recommended.

Shear Bond Strength of Brackets Bonded with Self-Etching Primers Compared to Conventional Acid-Etch Technique: A Randomized Clinical Trial.

OBJECTIVES: The purpose of this randomized clinical trial (RCT) was to compare the shear bond strength (SBS) of orthodontic brackets bonded to enamel with conventional acid-etch (AE) technique and self-etching primers (SEP). MATERIALS AND METHODS: Twenty-two patients, requiring extraction of two bicuspids for orthodontic reasons, were recruited. In each individual, following blinding and allocation concealment, one intact premolar received conventional AE, whereas the contralateral premolar received SEP with a split-mouth design. Bonded brackets remained in the oral cavity for two months. Afterward, the teeth were extracted without debonding the brackets. SBS and adhesive remnant index (ARI) were measured using a Universal Instron machine and a stereomicroscope, respectively. RESULTS: The mean SBS of the conventional AE and SEP groups was 9.53 and 9.20 MPa, respectively. Paired t-test showed no statistically significant difference between the two groups (P=0.096). Comparison of ARI between the two groups, using Wilcoxon test, indicated that significantly less adhesive remained on enamel with brackets bonded with SEP compared to brackets bonded with conventional AE (P<0.001) although the SBS was higher in the AE group. CONCLUSION: The present study indicated that although there is no significant difference in SBS between SEP and conventional AE for bonding orthodontic metal brackets, the amount of residual adhesive on the enamel surface is significantly less with SEP than with conventional AE.(IRCT registration number: IRCT201705099086N3).

Effect of CO2 Laser and Fluoride Varnish Application on Microhardness of Enamel Surface Around Orthodontic Brackets.

Introduction: Orthodontic treatment has many advantages such as esthetic improvement and self-esteem enhancement; yet it has some disadvantages such as increasing the risk of formation of white spot lesions, because it makes oral hygiene more difficult. It is rational to implement procedures to prevent these lesions. The present study was aimed to assess the effect of CO2 laser and fluoride varnish on the surface of the enamel surface microhardness around the orthodontic braces. Methods: Eighty extracted premolar teeth were selected, scaled, polished with nonfluoridated pumic and metal brackets were bonded to them. Then, they were randomly allocated to 5 groups: control (neither fluoride nor laser is used on enamel surfaces), fluoride (4 minutes fluoride varnish treatment of the enamel surfaces), CO2 laser (10.6 µm CO2 laser irradiation of the teeth), laserfluoride (fluoride application after laser irradiation) and fluoride-laser (fluoride was applied and then teeth were irradiated with laser). After surface treatment around brackets on enamel, the samples were stored in 0.1% thymol for less than 5 days and then they were exposed to a 10-day microbiological caries model. Microhardness values of enamel were evaluated with Vickers test. One sample of each group (5 teeth from 80 samples) was prepared for SEM (scanning electron microscopy) and the data from 75 remaining teeth were analyzed with analysis of variance (ANOVA) and chi-square tests (α =0.05). Results: Microhardness mean values from high to low were as follow: fluoride-laser, laser-fluoride, laser, fluoride and control. Microhardness in fluoride-laser group was significantly higher compared with that of the control group. Distribution adhesive remnant index (ARI) scores were significantly different between groups and most of bond failures occurred at the enamel-adhesive interface in groups 2 to 5 and at the adhesive-bracket interface in the control group. Conclusion: Combination of fluoride varnish and CO2 laser irradiation can reduce enamel demineralization around orthodontic brackets.

Treatment decision analysis for palatally-displaced canines based on orthodontists' opinion and CBCT.

OBJECTIVES: The aim of this study was to assess difficulty of treatment of palatally-displaced canines (PDC) according to experts' opinion using CBCT data and to determine a cut-off point for extraction versus forced eruption. SUBJECTS AND METHODS: Seven CBCT variables of thirty PDC cases were measured with Dolphin 3D software. In addition to measurements of each case, nine 3D and 2D views were prepared on one page and uploaded on the website (canineimpaction.com). Thirty-four orthodontists were asked to judge the difficulty of bringing the impacted canine into occlusal plane. Then, they scored from 1 to 5 the effect of each variable on treatment difficulty and also decided whether to force-erupt or extract the impacted tooth. RESULTS: Overlap in frontal view, angulation of the canine to the occlusal plan, vertical distance to the occlusal plane, age, dilaceration and rotation had significant relationship with the level of treatment difficulty. The treatment plan decision for PDC with treatment difficulty>7.5 was extraction rather than forced eruption. CONCLUSION: We can predict treatment difficulty of PDC by measuring CBCT variables and decide to extract or force-erupt with a reasonable level of agreement among a panel of orthodontists.

Effect of CPP-ACP paste with and without CO2 laser irradiation on demineralized enamel microhardness and bracket shear bond strength.

INTRODUCTION:: Many patients seeking orthodontic treatment already have incipient enamel lesions and should be placed under preventive treatments. The aim of this in vitro study was to evaluate the effect of CPP-ACP paste and CO2 laser irradiation on demineralized enamel microhardness and shear bond strength of orthodontic brackets. METHODS:: Eighty caries-free human premolars were subjected to a demineralization challenge using Streptococcus mutans. After demineralization, the samples were randomly divided into five equal experimental groups: Group 1 (control), the brackets were bonded without any surface treatment; Group 2, the enamel surfaces were treated with CPP-ACP paste for 4 minutes before bonding; Group 3, the teeth were irradiated with CO2 laser beams at a wavelength of 10.6 µm for 20 seconds. The samples in Groups 4 and 5 were treated with CO2 laser either before or through CPP-ACP application. SEM photomicrographs of a tooth from each group were taken to observe the enamel surface. The brackets were bonded to the buccal enamel using a conventional method. Shear bond strength of brackets and ARI scores were measured. Vickers microhardness was measured on the non-bonded enamel surface. Data were analyzed with ANOVA and Tukey test at the p< 0.05 level. RESULTS:: The mean shear bond strength and microhardness of the laser group were higher than those in the control group and this difference was statistically significant (p< 0.05). All groups showed a higher percentage of ARI score 4. CONCLUSION:: CO2 laser at a wavelength of 10.6 µm significantly increased demineralized enamel microhardness and enhanced bonding to demineralized enamel.

Effect of CPP-ACP paste with and without CO2 laser irradiation on demineralized enamel microhardness and bracket shear bond strength

ABSTRACT Introduction: Many patients seeking orthodontic treatment already have incipient enamel lesions and should be placed under preventive treatments. The aim of this in vitro study was to evaluate the effect of CPP-ACP paste and CO2 laser irradiation on demineralized enamel microhardness and shear bond strength of orthodontic brackets. Methods: Eighty caries-free human premolars were subjected to a demineralization challenge using Streptococcus mutans. After demineralization, the samples were randomly divided into five equal experimental groups: Group 1 (control), the brackets were bonded without any surface treatment; Group 2, the enamel surfaces were treated with CPP-ACP paste for 4 minutes before bonding; Group 3, the teeth were irradiated with CO2 laser beams at a wavelength of 10.6 µm for 20 seconds. The samples in Groups 4 and 5 were treated with CO2 laser either before or through CPP-ACP application. SEM photomicrographs of a tooth from each group were taken to observe the enamel surface. The brackets were bonded to the buccal enamel using a conventional method. Shear bond strength of brackets and ARI scores were measured. Vickers microhardness was measured on the non-bonded enamel surface. Data were analyzed with ANOVA and Tukey test at the p< 0.05 level. Results: The mean shear bond strength and microhardness of the laser group were higher than those in the control group and this difference was statistically significant (p< 0.05). All groups showed a higher percentage of ARI score 4. Conclusion: CO2 laser at a wavelength of 10.6 µm significantly increased demineralized enamel microhardness and enhanced bonding to demineralized enamel.

RESUMO Introdução: muitos pacientes, ao buscar o tratamento ortodôntico, já apresentam lesões incipientes no esmalte e precisam ser submetidos a tratamentos preventivos. O objetivo do presente estudo in vitro foi avaliar o efeito da pasta CPP-ACP e da irradiação com laser de CO2 na microdureza do esmalte desmineralizado e na resistência ao cisalhamento de braquetes ortodônticos. Métodos: oitenta pré-molares humanos hígidos foram submetidos a desmineralização usando Streptococcus mutans. Após a desmineralização, as amostras foram divididas aleatoriamente em cinco grupos experimentais: Grupo 1 (controle), os braquetes foram colados sem qualquer tratamento de superfície; Grupo 2, a superfície do esmalte foi tratada com pasta CPP-ACP por 4 minutos antes da colagem; Grupo 3, os dentes foram irradiados com laser de CO2 no comprimento de onda de 10,6 µm, por 20 segundos; Grupos 4 e 5, as amostras foram tratadas com laser de CO2 antes ou durante a aplicação de CPP-ACP. Foram feitas fotomicrografias por Microscopia Eletrônica de Varredura (MEV) de um dente de cada grupo, para avaliação da superfície do esmalte. Os braquetes foram colados ao esmalte na face vestibular, usando-se o método convencional. Foram medidos a resistência ao cisalhamento dos braquetes e o escore do Índice de Adesivo Remanescente (ARI). A microdureza Vickers foi medida nas superfícies do esmalte onde não foi realizada colagem. Os dados foram analisados com ANOVA e teste Tukey ao nível de p< 0,05. Resultados: a média da força de resistência ao cisalhamento e da microdureza do grupo laser foi superior à do grupo controle, com diferença estatisticamente significativa (p < 0,05). Todos os grupos apresentaram maior porcentagem do escore ARI=4. Conclusões: o laser de CO2 no comprimento de onda de 10,6 µm aumentou significativamente a microdureza do esmalte desmineralizado e melhorou a adesão dos braquetes nele.

Effect of changing the head position on accuracy of transverse measurements of the maxillofacial region made on cone beam computed tomography and conventional posterior-anterior cephalograms.

OBJECTIVES: This study aimed to assess the effect of head position on the accuracy of transverse measurements of the maxillofacial region on CBCT and conventional posteroanterior (PA) cephalograms. The second objective of this study was to find skull positions with the greatest and smallest effect on transverse measurements in the maxillofacial region. METHODS: PA cephalograms and CBCT scans were obtained from 10 dry human skulls in 7 positions, namely the central position, 10° and 20° rotations, 10° and 20° tilts and 10° and 20° tips. The CBCT scans were converted to PA cephalograms on which distances from six landmarks, namely the nasal cavity, zygomatic arch, jugale, antegonion, condylion and zygomaticofrontal suture to the mid-sagittal plane, were measured on both sides using Dolphin two-dimensional software. The paired t-test was used to compare the mean values separately in each position (for each landmark) with the gold standard (central skull position). The interclass correlation coefficient and the Bland-Altman plot were used to compare the mean values measured by two observers. RESULTS: The mean values of the distances measured on CBCT PA cephalograms were greater than those measured on conventional PA cephalograms; this difference was statistically significant for some landmarks (p < 0.005). The rotated position (as compared with the central position) caused the greatest change in values for most landmarks on both sides (p < 0.005). CONCLUSIONS: The CBCT PA cephalogram was more accurate than the conventional PA cephalogram, and landmarks farther from the midline exhibited greater changes on cephalograms compared with those closer to the midline. Patients are at risk of improper positioning when undergoing extraoral radiography such as PA cephalograms. Changes in head position may affect the transverse measurements and thus the treatment plan.

Effect of Head Position on Maxillofacial Transverse Measurements Made on the Skull and Cone Beam Computed Tomography Scans.

Article Incorrect patient positioning and the resultant image distortion occur in many radiographic examinations. This study aimed to assess the effect of tilting, rotation and tipping of the head on the accuracy of maxillofacial transverse measurements made on cone beam computed tomography (CBCT) scans. The CBCT scans were obtained in central position of 10 dry human skulls. Using three-dimensional (3D) Dolphin software, six positions namely 10° and 20° tilts, rotations and tips were reconstructed of central position. Transverse distances between landmarks were measured on 3D scans and the skulls. The intraclass correlation coefficient (ICC) and the Bland-Altman plot were used to compare the mean values measured by the two observers. For most landmarks, no significant differences were noted between the mean transverse distances measured in the six positions and those measured in central position on 3D scans (p>0.005). In conclusion, all measurements of transverse distances made on 3D scans in different positions were underestimated compared to the actual values measured on the skull.

Effect of Head Position on Maxillofacial Transverse Measurements Made on the Skull and Cone Beam Computed Tomography Scans

Article Incorrect patient positioning and the resultant image distortion occur in many radiographic examinations. This study aimed to assess the effect of tilting, rotation and tipping of the head on the accuracy of maxillofacial transverse measurements made on cone beam computed tomography (CBCT) scans. The CBCT scans were obtained in central position of 10 dry human skulls. Using three-dimensional (3D) Dolphin software, six positions namely 10° and 20° tilts, rotations and tips were reconstructed of central position. Transverse distances between landmarks were measured on 3D scans and the skulls. The intraclass correlation coefficient (ICC) and the Bland-Altman plot were used to compare the mean values measured by the two observers. For most landmarks, no significant differences were noted between the mean transverse distances measured in the six positions and those measured in central position on 3D scans (p>0.005). In conclusion, all measurements of transverse distances made on 3D scans in different positions were underestimated compared to the actual values measured on the skull.

Streptococcus mutans counts in patients wearing removable retainers with silver nanoparticles vs those wearing conventional retainers: A randomized clinical trial.

INTRODUCTION: The rough surface of Hawley removable appliances provides an environment for plaque accumulation, leading to enamel demineralization. The aim of this study was to evaluate the effect of silver nanoparticles incorporated into acrylic baseplates of orthodontic retainers on Streptococcus mutans colony-forming units. METHODS: Sixty-six orthodontic patients at the debonding stage were randomly assigned to 2 sex-matched groups with stratified block randomization: group 1 received conventional removable retainers; group 2 received removable retainers containing silver nanoparticles (about 40 nm in size and 500 ppm in concentration). After comprehensive orthodontic treatment, patients who revealed no clinical evidence of dental caries, periodontal pockets, or systemic disease were considered eligible for this study. Swab samples were taken from the maxillary palatal side from the patient in the dental chair at retainer placement (T1, 1 week after debonding the fixed orthodontic appliance) and T2, 7 weeks later. The main outcome was to compare the number of S mutans colony-forming units between the 2 groups 7 weeks after retainer delivery. The results were analyzed by using analysis of covariance. The participants and the assessors were blinded to the allocation groups. RESULTS: Twenty-nine patients in the control group and 32 in the intervention group were analyzed. At T1, the intervention group had higher S mutans colony counts relative to the control group. The analysis of covariance test showed a significant reduction of colonies in the intervention group after 7 weeks. The mean difference of colony counts between the 2 groups was 40.31 (95% confidence interval, 24.83-55.79; P < 0.001). CONCLUSIONS: Adding silver nanoparticles to the acrylic plate of retainers had a strong antimicrobial effect against S mutans under clinical conditions. REGISTRATION: This study was registered as a clinical trial at the Iranian Clinical Trial Center under the code number IRCT201309239086N2. FUNDING: This trial was supported by Hamadan Dental Research Centre, Hamadan University of Medical Sciences, Hamadan, Iran.

Three-dimensional analysis of the distal movement of maxillary 1st molars in patients fitted with mini-implant-aided trans-palatal arches.

OBJECTIVE: The aim of this study was to investigate three-dimensional molar displacement after distalization via miniscrews and a horizontal modification of the trans-palatal-arch (TPA). METHODS: The subjects in this clinical trial were 26 Class II patients. After the preparation of a complete set of diagnostic records, miniscrews were inserted between the maxillary 2nd premolar and 1st molar on the palatal side. Elastic modules connected to the TPA exerting an average force of 150-200 g/side parallel to the occlusal plane were applied. Cone-beam computed tomography was utilized to evaluate the position of the miniscrews relative to the adjacent teeth and maxillary sinus, and the direction of force relative to molar furcation. The distances from the central point of the incisive papilla to the mesiopalatal cusps of the 1st maxillary molars and the distances between the mesiopalatal cusps of the left and right molars were measured to evaluate displacement of the maxillary molars on the horizontal plane. Interocclusal space was used to evaluate vertical changes. RESULTS: Mean maxillary 1st molar distalization was 2.3 ± 1.1 mm, at a rate of 0.4 ± 0.2 mm/month, and rotation was not significant. Intermolar width increased by 2.9 ± 1.8 mm. Molars were intruded relative to the neighboring teeth, from 0.1 to 0.8 mm. CONCLUSIONS: Distalization of molars was possible without extrusion, using the appliance investigated. The intrusive component of force reduced the rate of distal movement.

Effect of dietary ascorbic Acid on osteogenesis of expanding midpalatal suture in rats.

OBJECTIVES: After maxillary expansion, a long period of retention is necessary to prevent early relapse. Therefore, it is beneficial to accelerate bone formation in the expanding midpalatal suture to reduce relapse. This study was designed to evaluate the effect of dietary vitamin C on osteogenesis of rat midpalatal suture during expansion. MATERIALS AND METHODS: Fifty-four male Wistar rats were randomly divided into three groups, each with a control and an experimental subgroup. An open-loop spring was bonded to maxillary incisors of each animal to expand the premaxillary suture. Experimental groups received dietary vitamin C in their water. The rats in the three groups were sacrificed at three, nine or 17-day intervals after bonding the spring. Then, the premaxilla was dissected and sections were made and stained with hematoxylin and eosin and osteopontin marker. Osteoblasts and osteoclasts were counted in the suture. Two-way ANOVA and the Mann-Whitney-U test were used for analyzing the data. RESULTS: After three days, the number of osteoblasts was significantly higher in the vitamin C group but after nine days it was significantly higher in the control group and after seventeen days there were no significant differences between the groups. Osteoclast counts were not significantly different between vitamin C and control groups. CONCLUSION: Vitamin C had a positive effect on osteogenesis at the beginning of bone formation in the expanding suture, but after nine days it had a negative effect on suture osteogenesis in rats.

Web-based evaluation of experts' opinions on impacted maxillary canines forced eruption using CBCT.

AIM: This study aims at examining the difficulty in performing forced eruption of impacted maxillary canines, using CBCT information and according to experienced orthodontist's opinion. The second aim was to find the most important factors related to this decision. METHODS: Based on a careful literature review on impacted maxillary canines, ten main factors were selected to assess difficulties associated with impacted teeth. Thirty six consecutive patients with 50 impacted maxillary canines were examined and variables were measured for each impacted tooth using Dolphin 3D software. Ten orthodontists assessed the radiographs of teeth and provided their opinion on the difficulty in bringing impacted teeth into occlusion named subjective degree of difficulty (SDD). The correlation established between mean SDD of each tooth and measured variables were analyzed by means of linear regression. RESULTS: Mean SDD was 6.45 ± 1.22 for all 50 teeth. Linear regression showed a high coefficient of correlation between mean SDD and age, dilacerations, vertical height, angulation and horizontal overlap (P < 0.05). CONCLUSION: To predict the difficulty of impacted maxillary canines forced eruption, according to the opinion of experienced orthodontists, the factors age, dilaceration, angulation, overlap and vertical distance from the occlusal plane are the most important variables.

Web-based evaluation of experts' opinions on impacted maxillary canines forced eruption using CBCT

AIM: This study aims at examining the difficulty in performing forced eruption of impacted maxillary canines, using CBCT information and according to experienced orthodontist's opinion. The second aim was to find the most important factors related to this decision. METHODS: Based on a careful literature review on impacted maxillary canines, ten main factors were selected to assess difficulties associated with impacted teeth. Thirty six consecutive patients with 50 impacted maxillary canines were examined and variables were measured for each impacted tooth using Dolphin 3D software. Ten orthodontists assessed the radiographs of teeth and provided their opinion on the difficulty in bringing impacted teeth into occlusion named subjective degree of difficulty (SDD). The correlation established between mean SDD of each tooth and measured variables were analyzed by means of linear regression. RESULTS: Mean SDD was 6.45 ± 1.22 for all 50 teeth. Linear regression showed a high coefficient of correlation between mean SDD and age, dilacerations, vertical height, angulation and horizontal overlap (P < 0.05). CONCLUSION: To predict the difficulty of impacted maxillary canines forced eruption, according to the opinion of experienced orthodontists, the factors age, dilaceration, angulation, overlap and vertical distance from the occlusal plane are the most important variables. .

OBJETIVO: o presente estudo tem o objetivo de avaliar, de acordo com a opinião de ortodontistas experientes, a dificuldade de se realizar a erupção forçada de caninos superiores impactados, com base em informações fornecidas por tomografia computadorizada de feixe cônico. O objetivo específico foi identificar os fatores mais importantes relacionados a essa opção de tratamento. MÉTODOS: com base em uma revisão meticulosa da literatura sobre caninos superiores impactados, selecionamos os dez principais fatores utilizados para avaliar a dificuldade em tratar dentes impactados. Trinta e seis pacientes, com um total de 50 caninos superiores impactados, foram avaliados. As variáveis para cada dente impactado foram obtidas utilizando o programa Dolphin 3D. Dez ortodontistas avaliaram as radiografias referentes aos dentes selecionados e opinaram sobre a dificuldade em alinhar dentes impactados. O grau de dificuldade foi denominado Grau de Dificuldade Subjetivo (GDS). A relação entre o valor médio de GDS de cada dente e as variáveis obtidas foi analisada por regressão linear. RESULTADOS: o valor médio de GDS foi de 6,45 ± 1,22, para todos os dentes. A regressão linear gerou um alto coeficiente de relação entre o valor médio de GDS e as variáveis idade, dilaceração, altura vertical, angulação e sobreposição horizontal (p < 0,05). CONCLUSÃO: de acordo com a opinião de ortodontistas experientes, para prever a dificuldade em se realizar a erupção forçada de caninos superiores impactados, as variáveis idade, dilaceração, angulação, sobreposição e distância vertical do plano oclusal são as mais importantes. .

Comparison of Electric Toothbrush, Persica and Chlorhexidine Mouthwashes on Reduction of Gingival Enlargement in Orthodontic Patients: A Randomised Clinical Trial.

PURPOSE: To compare the efficacy of chlorhexidine, Persica mouthwash and electric toothbrushes in improving gingival enlargement in patients with fixed orthodontic appliances. MATERIALS AND METHODS: Seventy-two orthodontic patients with at least two sites of gingival enlargement were randomly allocated into four equal groups: 1) manual toothbrush; 2) electric toothbrush; 3) manual toothbrush+Persica mouthwash; 4) manual toothbrush+chlorhexidine mouthwash. All participants were instructed to brush their teeth at least twice a day. The subjects in groups 3 and 4 were instructed to use Persica or chlorhexidine according to the respective manufacturer's instructions. Bleeding on probing (BOP) index, gingival index (GI), O'Leary's plaque index (PI) and constructed hyperplastic index (HI) of all the subjects were measured in a blind manner at the start of the study and 2 weeks later. Changes of indices in the entire oral cavity and individual affected teeth were analysed with SPSS 16 using chi-square, ANOVA, ANCOVA, LSD and the paired t-test. RESULTS: In the entire oral cavity, there was a statistically significant improvement in indices in all the groups except for HI, which significantly improved only in group 4 (p=0.001). Data of individual teeth with hyperplastic gingiva showed significant reduction of all the variables except for HI in group 1 (p=0.08). No significant differences were found between groups 1 and 2 or between groups 3 and 4. CONCLUSION: The efficacy of Persica was similar to that of chlorhexidine in improving gingival conditions. None of the treatment modalities could reduce gingival enlargement to the clinically acceptable level of health.