ABSTRACT
Unreinforced masonry structures are vulnerable to seismic loading due to their brittle behavior, and must therefore be strengthened. This paper presents the seismic performance of brick masonry strengthened with steel and plastic meshes. For this purpose, twenty masonry wallets of (600 × 600 × 113 mm) were constructed, keeping the same materials and workmanship. Fifteen of them were reinforced using steel and plastic meshes. These specimens were tested for in-plane static cyclic diagonal tension (shear) behavior. The critical parameters, such as shear stress, strain, failure modes, ductility, energy dissipation, and stiffness degradation were investigated. Compared to reference and plastic-reinforced specimens, the steel-reinforced samples were found to be highly effective. Furthermore, the recommended category of steel increased the shear capacity, energy dissipation, and ductility ratio by 1.3, 14, and 6.3 times, respectively.
ABSTRACT
Recently, the addition of natural fibers to high strength concrete (HSC) has been of great interest in the field of construction materials. Compared to artificial fibers, natural fibers are cheap and locally available. Among all natural fibers, coconut fibers have the greatest known toughness. In this work, the mechanical properties of coconut fiber reinforced high strength concrete (CFR-HSC) are explored. Silica fume (10% by mass) and super plasticizer (1% by mass) are also added to the CFR-HSC. The influence of 25 mm-, 50 mm-, and 75 mm-long coconut fibers and 0.5%, 1%, 1.5%, and 2% contents by mass is investigated. The microstructure of CFR-HSC is studied using scanning electron microscopy (SEM). The experimental results revealed that CFR-HSC has improved compressive, splitting-tensile, and flexural strengths, and energy absorption and toughness indices compared to HSC. The overall best results are obtained for the CFR-HSC having 50 mm long coconut fibers with 1.5% content by cement mass.
ABSTRACT
Tuned liquid column ball damper (TLCBD) is a passive control device used for controlling the building vibrations induced from wind or earthquakes. TLCBD is a modified form of conventional tuned liquid column damper (TLCD). This paper studies the effect of TLCBD on the four-storey steel frame structure. The performance of the TLCBD is also compared with conventional TLCD. The analytical model of both TLCD and TLCBD is presented here. The effectiveness of these analytical models is examined experimentally by series of shaking table tests under different excitation levels including harmonic loadings and seismic excitations. In TLCBD, the vibration is reduced significantly as compared to TLCD by using steel ball as a moving orifice. The difference in diameter of steel ball and tube, containing the liquid column, acts as an orifice which moves with the movement of the ball. This moving orifice phenomenon enhanced the vibration reduction effect by resisting the water motion in the TLCBD. Root mean square (RMS) and peak values of acceleration were calculated for each loading and each storey of uncontrolled and controlled structures. Comparison of the time histories of controlled and uncontrolled structures for different loadings is also reported. Results indicate that the TLCBD is more effective in the earthquake scenarios as compared to the harmonic excitations. The TLCBD controls the vibration of the primary structure significantly in vibration reduction.
