Castellated tiles as the beam-facing components for the diagnostic calorimeter of the negative ion source SPIDER.

This paper presents the results of numerical simulations and experimental tests carried out to assess the feasibility and suitability of graphite castellated tiles as beam-facing component in the diagnostic calorimeter of the negative ion source SPIDER (Source for Production of Ions of Deuterium Extracted from Radio frequency plasma). The results indicate that this concept could be a reliable, although less performing, alternative for the present design based on carbon fiber composite tiles, as it provides thermal measurements on the required spatial scale.

High energy flux thermo-mechanical test of 1D-carbon-carbon fibre composite prototypes for the SPIDER diagnostic calorimeter.

Operation of the thermonuclear fusion experiment ITER requires additional heating via injection of neutral beams from accelerated negative ions. In the SPIDER test facility, under construction in Padova, the production of negative ions will be studied and optimised. STRIKE (Short-Time Retractable Instrumented Kalorimeter Experiment) is a diagnostic used to characterise the SPIDER beam during short pulse operation (several seconds) to verify if the beam meets the ITER requirements about the maximum allowed beam non-uniformity (below ±10%). The major components of STRIKE are 16 1D-CFC (Carbon-Carbon Fibre Composite) tiles, observed at the rear side by a thermal camera. This contribution gives an overview of some tests under high energy particle flux, aimed at verifying the thermo-mechanical behaviour of several CFC prototype tiles. The tests were performed in the GLADIS facility at IPP (Max-Plank-Institut für Plasmaphysik), Garching. Dedicated linear and nonlinear simulations were carried out to interpret the experiments and a comparison of the experimental data with the simulation results is presented. The results of some morphological and structural studies on the material after exposure to the GLADIS beam are also given.

Potencialidades fitoquímicas do melão (Cucumis melo L. ) na região Noroeste do Rio Grande do Sul - Brasil / Phytochemical potentialities of melon (Cucumis melo L. ) in the northwest region of Rio Grande do Sul - Brazil

O melão (Cucumis melo L.) é uma fruta muito apreciada por suas qualidades e sua produção vem crescendo e ganhando espaço no mercado nacional e internacional. Em regiões como o Noroeste do Rio Grande do Sul, destaca-se como uma nova alternativa de renda para vários agricultores. Neste contexto, o presente trabalho teve como objetivo analisar o potencial fitoquímico de alguns cultivares de melão da região Noroeste do Rio Grande do Sul. A análise fitoquímica utilizando como farmacógeno as folhas, foi realizada para a verificação da presença de metabólitos secundários, tais como: saponinas, cumarinas, cardiotônicos, cianogenéticos, alcalóides, taninos, antraquinonas, flavonoides, e óleos voláteis. Também foi avaliado o teor de suco a partir dos frutos. Dentre os cinco cultivares analisados, Gaúcho, Imperial, Hy Mark, Magelan, e Cantaloupe, o cultivar Gaucho apresentou a maior variedade em metabólitos secundários. Na avaliação do teor de suco a cultivar Magelan se destacou em comparação às demais cultivares testadas.

The melon (Cucumis melo L.) is a fruit highly appreciated for its qualities and its production has been growing and gaining space in the national and in the international market. In regions like the northwest of Rio Grande do Sul - Brazil, it stands out as a new income alternative for farmers. In this context, this study aimed to analyze the phytochemical potential of some melon cultivars in the northwest region of Rio Grande do Sul. The phytochemical analysis, using the leaves as pharmacogen, was performed to verify the presence of secondary metabolites such as saponins, coumarins, cardiac glycosides, cyanogenetic glicosides, alkaloids, tannins, anthraquinones, flavonoids and volatile oils. The juice content from the fruits was also evaluated. Among the five analyzed cultivars, Gaucho, Imperial, Hy Mark, Magelan and Cantaloupe, cultivar Gaucho had the greatest variety of secondary metabolites. In the assessment of the juice content, cultivar Magelan was superior compared to the remaining tested cultivars.

Design and specifications of the diagnostics for the instrumented calorimeter of source for the production of ions of deuterium extracted from radio frequency plasma.

In the development of the neutral beam injector for ITER experiment, the test facility SPIDER is going to be built. To measure the beam parameters, several diagnostics are used. One of them is the Short-Time Retractable Instrumented Kalorimeter Experiment (STRIKE) which measures beam uniformity, beamlet divergence, and stripping losses. This contribution gives an overview of the diagnostics dedicated to these measurements: thermal cameras, thermocouples, current sensors, and electrostatic sensors. The specifications of these diagnostics have been defined according to the results of electrostatic and thermal simulations. A failure modes and effects analysis has been performed during the design. Consequently the project of the STRIKE diagnostics has been optimized to reduce the possible failure risks.

Thermal and electrostatic simulations of the diagnostic calorimeter for the source for production of ion of deuterium extracted from RF plasma beam.

To study and optimise negative ion production for the ITER neutral beam injectors, a test facility is under construction in Padova with the aim of testing beam characteristics and to verify the source proper operation. The instrumented calorimeter STRIKE (short-time retractable instrumented kalorimeter experiment) is being developed to characterise the SPIDER (Source for Production of Ion of Deuterium Extracted from RF plasma) beam during short operations. The paper presents an investigation of the response of STRIKE measurement systems. It results that biasing is necessary to cope with the influence of secondary electrons on current measurements; moreover, despite the discretisation of the recorded thermal patterns introduced by the pixels of thermal cameras, a sufficient spatial resolution is expected.

Development of topical nanoemulsions containing quercetin and 3-O-methylquercetin.

This study describes the physico-chemical properties and the skin permeation profile of quercetin (Q) and 3-O-methylquercetin (MQ) from lipid nanoemulsions. Formulations composed of octyldodecanol, egg lecithin, water (NE) and cetyl trimethyl ammonium bromide (CNE) were obtained by spontaneous emulsification. This procedure yielded monodisperse nanoemulsions exhibiting a mean droplet size of approximately 200-300 nm. Nanoemulsions were further characterized in terms of zeta-potential, surface tension, and morphology by transmission electron microscopy. The amount of flavonoids incorporated into nanoemulsions reached nearly 100% (at 1 mg/mL). The permeation studies were carried out using ear pig skin mounted in Franz diffusion cells. The overall results have shown a slow permeation profile of both Q and MQ from nanoemulsions. However, a higher permeation flux rate of flavonoids from CNE (approximately 0.2 microg/cm2/h) as compared to NE (approximately 0.08 microg/cm2/h) was observed, showing the effect of the positively charged surface of CNE on this parameter. Such results open interesting perspectives for the topical administration of the flavonoids Q and MQ.