Optical and scintillation properties of hybrid manganese(II) bromides with formamidinium and acetamidinium cations.

In recent years, hybrid manganese(II) halides (HMHs) have attracted wide attention due to their impressive optical properties, low toxicity, and facile synthetic processibility. Being effective reabsorption-free phosphors, these compounds demonstrate the potential to be used as low-cost solution-processable scintillators. However, most of the HMHs studied to date contain bulk organic cations and, as a result, are characterized by low density and low X-ray stopping power. For this reason, we studied manganese(II) bromides with compact organic cations such as formamidinium (FA+) and acetamidinium (AcA+). In particular, we synthesized four new phases, two of which are characterized by octahedral coordination of manganese ions ((FA)MnBr3 and (AcA)MnBr3) and red emission, whereas the other two have tetrahedrally coordinated Mn2+ ions ((FA)3MnBr5 and (AcA)2MnBr4) and green emission. Photoluminescence (PL) and radioluminescence measurements demonstrated high PL quantum yields and reasonable scintillation light yields of acetamidinium-based compounds. In addition, unlike most known HMH-based scintillators, the discovered materials have a relatively high density due to the small fraction of the volume occupied by organic cations, so their X-ray attenuation coefficients are comparable to the well-known oxide scintillators.

Exceptional structural diversity of hybrid halocuprates(I) with methylammonium and formamidinium cations.

Hybrid halocuprates(I) are nowadays the subject of intensive studies as promising materials for various optoelectronic applications. This class of materials is characterized by wide structural diversity enabled by a great variety in the size and shape of organic cations. Therefore, the study of composition-structure-property relationships is a key step for the rational design of new halocuprate materials with desired properties. In this paper, we comprehensively studied MABr/CuBr and FABr/CuBr systems (MA+ = methylammonium and FA+ = formamidinium) and established the existence of five novel phases (namely, MACu2Br3, FA2[Cu4Br6], MACuBr2, FACuBr2, and FA3CuBr4) related to four different structural types and three distinct A+ : Cu+ stoichiometries (A+ = MA+/FA+). The optical properties of the discovered phases are studied by absorption and low-temperature photoluminescence spectroscopy. Based on a crystal-chemical analysis, we explained a unique structural diversity of the MA- and FA-based bromocuprates, as well as revealed new structure-property relationships.

Crystallization Pathways of FABr-PbBr2-DMF and FABr-PbBr2-DMSO Systems: The Comprehensive Picture of Formamidinium-Based Low-Dimensional Perovskite-Related Phases and Intermediate Solvates.

In this study, we systematically investigated the phase diversity and crystallization pathways of the FABr excessive regions of two ternary systems of FABr-PbBr2-DMF and FABr-PbBr2-DMSO (where FA+-formamidinium cations, DMF-dimethylformamide and DMSO-dimethyl sulfoxide solvents). In these systems, a new FA3PbBr5 phase with a structure containing chains of vertex-connected PbBr6 octahedra is discovered, and its crystal structure is refined. We experimentally assess fundamental information on differences in the mechanisms of crystallization process in FABr-PbBr2-DMF and FABr-PbBr2-DMSO systems and determine possible pathways of crystallization of hybrid perovskites. We show that intermediate solvate phases are not observed in the system with DMF solvent, while a number of crystalline solvates tend to form in the system with DMSO at various amounts of FABr excess.

Nonmonotonic Photostability of BA2MAn-1PbnI3n+1 Homologous Layered Perovskites.

Layered lead halide perovskites (2D LHPs) are attracting considerable attention as a promising material for a new generation of solar cell devices. LHPs have been presented as a more stable alternative to the more widespread 3D bulk perovskite materials; however, a critical analysis of their photostability is still lacking. In this work, we perform a comparative study between BA2MAn-1PbnI3n+1 (BA─butylammonium and MA─methylammonium) 2D LHPs with different dimensionalities (n = 1-3) and MAPbI3 3D perovskites. We compare different stability testing protocols including photometrical determination of iodine-containing products in nonpolar solvents, X-ray diffraction, and photoluminescence (PL) spectroscopy. The resulting trends of the photostability in an inert atmosphere based on PL spectroscopy measurements demonstrate a nonmonotonic dependence of the degradation rate on the perovskite layer thickness n with a "stability island" at n ≥ 3, which is caused by a combination of antibate factors of electronic structures and chemical compositions in the family of 2D perovskites. We also identify a critical oxygen concentration in the surrounding environment that affects the mechanism and strongly enhances the rate of layered perovskite photodegradation.

Solubility of Hybrid Halide Perovskites in DMF and DMSO.

Solution methods remain the most popular means for the fabrication of hybrid halide perovskites. However, the solubility of hybrid perovskites has not yet been quantitively investigated. In this study, we present accurate solubility data for MAPbI3, FAPbI3, MAPbBr3 and FAPbBr3 in the two most widely used solvents, DMF and DMSO, and demonstrate huge differences in the solubility behavior depending on the solution compositions. By analyzing the donor numbers of the solvents and halide anions, we rationalize the differences in the solubility behavior of hybrid perovskites with various compositions, in order to take a step forward in the search for better processing conditions of hybrid perovskites for solar cells and optoelectronics.

Structural Disorder in Layered Hybrid Halide Perovskites: Types of Stacking Faults, Influence on Optical Properties and Their Suppression by Crystallization Engineering.

Layered hybrid halide perovskites (LHHPs) are an emerging type of semiconductor with a set of unique optoelectronic properties. However, the solution processing of high-quality LHHPs films with desired optical properties and phase composition is a challenging task, possibly due to the structural disorder in the LHHP phase. Nevertheless, there is still a lack of experimental evidence and understanding of the nature of the structural disorder in LHHPs and its influence on the optical properties of the material. In the current work, using 2D perovskites (C4H9NH3)2(CH3NH3)n-1PbnI3n+1 (further BA2MAn-1PbnI3n+1) with n = 1-4 as a model system, we demonstrate that deviations in LHHPs optical properties and X-ray diffraction occur due to the presence of continuous defects-Stacking Faults (SFs). Upon analyzing the experimental data and modeled XRD patterns of a possible set of stacking faults (SFs) in the BA2MAPb2I7 phase, we uncover the most plausible type of SFs, featured by the thickness variation within one perovskite slab. We also demonstrate the successful suppression of SFs formation by simple addition of BAI excess into BA2MAn-1PbnI3n+1 solutions.

Molecular and Supramolecular Structures of Triiodides and Polyiodobismuthates of Phenylenediammonium and Its N,N-dimethyl Derivative.

Despite remarkable progress in photoconversion efficiency, the toxicity of lead-based hybrid perovskites remains an important issue hindering their applications in consumer optoelectronic devices, such as solar cells, LED displays, and photodetectors. For that reason, lead-free metal halide complexes have attracted great attention as alternative optoelectronic materials. In this work, we demonstrate that reactions of two aromatic diamines with iodine in hydroiodic acid produced phenylenediammonium (PDA) and N,N-dimethyl-phenylenediammonium (DMPDA) triiodides, PDA(I3)2⋅2H2O and DMPDA(I3)I, respectively. If the source of bismuth was added, they were converted into previously reported PDA(BiI4)2⋅I2 and new (DMPDA)2(BiI6)(I3)⋅2H2O, having band gaps of 1.45 and 1.7 eV, respectively, which are in the optimal range for efficient solar light absorbers. All four compounds presented organic-inorganic hybrids, whose supramolecular structures were based on a variety of intermolecular forces, including (N)H⋅⋅⋅I and (N)H⋅⋅⋅O hydrogen bonds as well as I⋅⋅⋅I secondary and weak interactions. Details of their molecular and supramolecular structures are discussed based on single-crystal X-ray diffraction data, thermal analysis, and Raman and optical spectroscopy.

New Methylamine-Iodine-Mediated Solvent-Free Approach of Hybrid Perovskite Synthesis via the Redox Conversion of Metallic Lead Films.

The fast progress of lab-scale perovskite solar cells makes the problem of upscaling of perovskite thin-film deposition more and more acute; therefore, the development of new methods for perovskite deposition is highly desired. In this work, we proposed a new solution-free preparation approach for hybrid perovskite films based on the in situ generation of methylammonium iodide from methylamine and iodine vapors in the presence of an organic reducing agent conjugated with a redox process of metallic lead conversion with iodine vapor. At first, we demonstrated that either metallic lead or lead iodide powders can readily react with the solution of methylamine and iodine in the presence of isopropyl alcohol acting as a reducing agent, resulting in a phase-pure polycrystalline CH3NH3PbI3 perovskite. A possible mechanism of underlying chemical processes has been proposed. In order to convert the predeposited thin films of metallic lead to CH3NH3PbI3 perovskite, a protocol of sequential treatment by iodine and methylamine vapors was proposed. Finally, we revealed the optimal conditions of processing, which were proven to be facile and robust for the sake of the better control of perovskite grain morphology.

New Acidic Precursor and Acetone-Based Solvent for Fast Perovskite Processing via Proton-Exchange Reaction with Methylamine.

A new solvent system for PbI2 based on HI solution in acetone with a low boiling point is proposed. High solubility of PbI2 is caused by the formation of iodoplumbate complexes, and reaches a concentration of 1.6 M. Upon its crystallization metastable solvate phases PbI2∙HI∙n{(CH3)2CO} are formed. The latter allows for their easy deposition on substrates in a form of smooth and uniform thin films by spin-coating. Through a fast acid-base reaction with a gaseous amine, the films of the intermediate phase can be completely converted to single-phase perovskite films. The developed method allows one to form smooth perovskite films with high crystallinity with a thickness up to 1 µm. Due to easy and fast processing, the developed method can be promising for perovskite technology upscaling.

Methylammonium Polyiodides: Remarkable Phase Diversity of the Simplest and Low-Melting Alkylammonium Polyiodide System.

Newly discovered methylammonium polyiodides (MAIx) are unique precursors for innovative solvent-free technologies in perovskite photovoltaics because MAIx are liquids at room temperature and demonstrate high chemical reactivity. We investigated the features of an MAI-I2 system and built up a first phase diagram in wide temperature and composition ranges using data from differential scanning calorimetry, single-crystal X-ray diffraction, and visual thermal analysis. The phase diagram has been found to differ drastically from that of any related systems owing to the unique propensity of methylammonium toward forming a diversity of polyiodides with complicated crystal structures, namely, MAI2, MAI2.67, MAI4, and MAI5.5, found in this system for the first time. The performed density functional theory calculations revealed the crucial role of entropy contributing to the formation of higher methylammonium polyiodides, in good agreement with experimental data.

Strategic advantages of reactive polyiodide melts for scalable perovskite photovoltaics.

Despite tremendous progress in efficiency and stability, perovskite solar cells are still facing the challenge of upscaling. Here we present unique advantages of reactive polyiodide melts for solvent- and adduct-free reactionary fabrication of perovskite films exhibiting excellent quality over large areas. Our method employs a nanoscale layer of metallic Pb coated with stoichiometric amounts of CH3NH3I (MAI) or mixed CsI/MAI/NH2CHNH2I (FAI), subsequently exposed to iodine vapour. The instantly formed MAI3(L) or Cs(MA,FA)I3(L) polyiodide liquid converts the Pb layer into a pure perovskite film without byproducts or unreacted components at nearly room temperature. We demonstrate highly uniform and relatively large area MAPbI3 perovskite films, such as 100 cm2 on glass/fluorine-doped tin oxide (FTO) and 600 cm2 on flexible polyethylene terephthalate (PET)/indium tin oxide (ITO) substrates. As a proof-of-concept, we demonstrate solar cells with reverse scan power conversion efficiencies of 16.12% (planar MAPbI3), 17.18% (mesoscopic MAPbI3) and 16.89% (planar Cs0.05MA0.2FA0.75PbI3) in the standard FTO/c(m)-TiO2/perovskite/spiro-OMeTAD/Au architecture.