Structural ordering at magnetic seeds with twins at boundaries of a core-shell alloy Mn60Bi40and tailored magnetic properties.

A spin Mn3d5-rich Mn60Bi40alloy reveals a model system in order to tailor profound magnetic properties at unpaired 3d5spins in such alloys of a core-shell structure. As annealed (at a critical temperature 573 K in H2gas), a refined powder (in glycine) grows onα-MnBi seeds (crystallites) present in it at Mn/Bi atoms order over topological layers, preferentially along (110) planes, at a self-confined structure at seeds of an anisotropic shape of hexagonal (h) plates (25-85 nm widths). In terms of the HRTEM images, the atoms turn down at edges (at the plates grow up) in a spiral layer, ≤ 2.1 nm thickness, of small core-shells. A spin model is proposed to delineate a way at the spins can pin down at the edges, form single magnetic domains, and raise coercivity (Hc), with no much loss of net magnetic moment. The X-ray diffraction and HRTEM images corroborate the results of topological pacing of atoms at the h-plates at anneals. A novelty is that a core-shell leads to tailor a superbHc, as much as 11.110 kOe (16.370 kOe at 350 K), with a fairly large magnetization, 76.5 emu g-1, at near 300 K. An enhanced Curie point 650.1 K (628 K at Mn50Bi50alloy) confers a surplus 3d5-Mn spin sensitively tunesα-MnBi stoichiometry and so its final magnetic structure. A refined alloy powder so made is useful to make powerful magnets and devices in the forms of films and bonded magnets in different shapes for uses as small tools, tweezers, and other devices.

Highly Conductive Nanocrystalline Diamond Films and Electronic Metallization Scheme.

By using a methane and hydrogen process gas mixture in an appropriate hot-filament CVD process without further dopant, high electrical conductivity of over 100 S/cm has been achieved in nanocrystalline diamond films deposited on silicon single-crystalline substrates. Furthermore, it was found that an oxygen reactive-ion etching process (O-RIE) can improve the diamond film surface's electron affinity, thus reducing the specific contact resistance. The reduction of the specific contact resistance by a factor of up to 16 was realized by the oxygen ion etching process, down to 6×10-6 Ωcm2. We provide a qualitative explanation for the mechanism behind the contact resistance reduction in terms of the electron affinity of the diamond surface. With the aid of XPS, AFM, and surface wetting measurements, we confirmed that a higher surface electron affinity is responsible for the lower specific contact resistance of the oxygen-terminated nanocrystalline diamond films.

Broadband Optical Absorber Based on Nanopatterned Metallic Glass Thin Films.

Applications of metallic glass thin films (MGTFs) in the optical area have seldom been reported. We successfully design and fabricate a broadband and durable absorber with MGTFs. It is found that the absorber, with a total thickness of only ∼230 nm smaller than the light wavelength, exhibits excellent performance, that is, an average absorption of >90% from the visible to the near-infrared range (500-1300 nm). This is of significance for the optical application of MGTFs with the potential for large-scale fabrication using superplastic deformation in the supercooled liquid region of MGTFs.

Improved Tensile Ductility by Severe Plastic Deformation for Nano-Structured Metallic Glass.

The effect of severe plastic deformation by high-pressure torsion (HPT) on the structure and plastic tensile properties of two Zr-based bulk metallic glasses, Zr55.7Ni10Al7Cu19Co8.3 and Zr64Ni10Al7Cu19, was investigated. The compositions were chosen because, in TEM investigation, Zr55.7Ni10Al7Cu19Co8.3 exhibited nanoscale inhomogeneity, while Zr64Ni10Al7Cu19 appeared homogeneous on that length scale. The nanoscale inhomogeneity was expected to result in an increased plastic strain limit, as compared to the homogeneous material, which may be further increased by severe mechanical work. The as-cast materials exhibited 0.1% tensile plasticity for Zr64Ni10Al7Cu19 and Zr55.7Ni10Al7Cu19Co8.3. Following two rotations of HPT treatment, the tensile plastic strain was increased to 0.5% and 0.9%, respectively. Further testing was performed by X-ray diffraction and by differential scanning calorimetry. Following two rotations of HPT treatment, the initially fully amorphous Zr55.7Ni10Al7Cu19Co8.3 exhibited significantly increased free volume and a small volume fraction of nanocrystallites. A further increase in HPT rotation number did not result in an increase in plastic ductility of both alloys. Possible reasons for the different mechanical behavior of nanoscale heterogeneous Zr55.7Ni10Al7Cu19Co8.3 and homogeneous Zr64Ni10Al7Cu19 are presented.

Surface tension and viscosity of liquid Pd43Cu27Ni10P20 measured in a levitation device under microgravity.

Here we present measurements of surface tension and viscosity of the bulk glass-forming alloy Pd43Cu27Ni10P20 performed during containerless processing under reduced gravity. We applied the oscillating drop method in an electromagnetic levitation facility on board of parabolic flights. The measured viscosity exhibits a pronounced temperature dependence following an Arrhenius law over a temperature range from 1100 K to 1450 K. Together with literature values of viscosity at lower temperatures, the viscosity of Pd43Cu27Ni10P20 can be well described by a free volume model. X-ray diffraction analysis on the material retrieved after the parabolic flights confirm the glassy nature after vitrification of the bulk samples and thus the absence of crystallization during processing over a wide temperature range.

High throughput fabrication of large-area plasmonic color filters by soft-X-ray interference lithography.

Plasmonic color filters in mass production have been restricted from current fabrication technology, which impede their applications. Soft-X-ray interference lithography (XIL) has recently generated considerable interest as a newly developed technique for the production of periodic nano-structures with resolution theoretically below 4 nm. Here we ameliorate XIL by adding an order sorting aperture and designing the light path properly to achieve perfect-stitching nano-patterns and fast fabrication of large-area color filters. The fill factor of nanostructures prepared on ultrathin Ag films can largely affect the transmission minimum of plasmonic color filters. By changing the fill factor, the color can be controlled flexibly, improving the utilization efficiency of the mask in XIL simultaneously. The calculated data agree well with the experimental results. Finally, an underlying mechanism has been uncovered after systematically analyzing the localized surface plasmon polaritons (LSPPs) coupling in electric field distribution.

Angle-insensitive plasmonic color filters with randomly distributed silver nanodisks.

Plasmonic color filters inherently suffer from angular sensitiveness, which hinder them from practical applications. Here, we present a plasmonic subtractive color filter incorporating two-dimensional randomly distributed silver nanodisks on top of a glass substrate. Due to the elimination of structural periodicity, the proposed plasmonic color filter works via localized surface plasmon resonances (LSPRs) and thus enables excellent angle-insensitive (up to 60°) performance. In addition, uncoupled LSPRs between nanodisks guarantee stability and reproducibility of the color filter. Finally, a palette of colors across the visible region was obtained with the proposed color filters by simply varying the diameter of nanodisks, exhibiting a promising and robust applicability in digital imaging and sensing industries.

Light Effect on Water Viscosity: Implication for ATP Biosynthesis.

Previous work assumed that ATP synthase, the smallest known rotary motor in nature, operates at 100% efficiency. Calculations which arrive to this result assume that the water viscosity inside mitochondria is constant and corresponds to that of bulk water. In our opinion this assumption is not satisfactory for two reasons: (1) There is evidence that the water in mitochondria prevails to 100% as interfacial water. (2) Laboratory experiments which explore the properties of interfacial water suggest viscosities which exceed those of bulk water, specifically at hydrophilic interfaces. Here, we wish to suggest a physicochemical mechanism which assumes intramitochondrial water viscosity gradients and consistently explains two cellular responses: The decrease and increase in ATP synthesis in response to reactive oxygen species and non-destructive levels of near-infrared (NIR) laser light, respectively. The mechanism is derived from the results of a new experimental method, which combines the technique of nanoindentation with the modulation of interfacial water layers by laser irradiation. Results, including the elucidation of the principle of light-induced ATP production, are expected to have broad implications in all fields of medicine.

Carbon fiber-ZnO nanowire hybrid structures for flexible and adaptable strain sensors.

We report the flexible piezotronic strain sensors fabricated using carbon fiber-ZnO nanowire hybrid structures by a novel and reliable method. The I-V characteristic of the sensor shows high sensitivity to external strain due to the change in Schottky barrier height (SBH), which has a linear relationship with strain. This fabricated strain sensor has a quick, real-time current response under both static and dynamic mechanical loads. The change in SBH resulted from the strain-induced piezoelectric potential is investigated by band gap theory. In this work we develop a new feasible method to fabricate a flexible strain sensor within the fabric adapted to textile structures, able to measure their strain.

Correlating the stretched-exponential and super-Arrhenius behaviors in the structural relaxation of glass-forming liquids.

Following the report of a single-exponential activation behavior behind the super-Arrhenius structural relaxation of glass-forming liquids in our preceding paper, we find that the non-exponentiality in the structural relaxation of glass-forming liquids is straightforwardly determined by the relaxation time, and could be calculated from the measured relaxation data. Comparisons between the calculated and measured non-exponentialities for typical glass-forming liquids, from fragile to intermediate, convincingly support the present analysis. Hence the origin of the non-exponentiality and its correlation with liquid fragility become clearer.

Single-exponential activation behavior behind the super-Arrhenius relaxations in glass-forming liquids.

The reported relaxation time for several typical glass-forming liquids was analyzed by using a kinetic model for liquids which invoked a new kind of atomic cooperativity--thermodynamic cooperativity. The broadly studied 'cooperative length' was recognized as the kinetic cooperativity. Both cooperativities were conveniently quantified from the measured relaxation data. A single-exponential activation behavior was uncovered behind the super-Arrhenius relaxations for the liquids investigated. Hence the mesostructure of these liquids and the atomic mechanism of the glass transition became clearer.

Reversible atomic processes as basic mechanisms of the glass transition.

Reversible formation and disappearance of vacant spaces (vacancy-type defects) in bulk Zr57Cu15.4Ni12.6Nb5Al10 glass are directly evidenced by high-resolution, time-differential dilatometry studies. The vacancy kinetics are strongly temperature-dependent, with an effective migration enthalpy of HVM=3.34 eV. This may explain the strong temperature dependence of glass properties such as viscosity. The results presented here are of general importance for understanding amorphous condensed matter and biomaterials and for the technical development of amorphous steels.

Interfacial shear strength of titanium implants in bone is significantly improved by surface topographies with high pit density and microroughness.

Surface structure of implants influences bone response and interfacial shear strength between implants and bone. The aim of this study was to find topographical parameters that correlate with the interfacial shear strength. Two groups of sand-blasted titanium screws were implanted in 17 sheep tibia, each for 2-52 weeks: (A) acid pickled with HF/HNO(3); (B) acid etched with HCl/H(2)SO(4). Screw removal torque was measured and surface topography of both implant groups was studied by scanning electron microscopy, optical profilometry, and scanning probe microscopy. The roughness as well as the surface area of type A surface was higher in the scan region of 100 microm, but the microroughness and surface area of type B surface was higher in the scan region of 10 microm. A significantly higher removal torque (interfacial shear strength) of the surface treatment type B (412 +/- 60 Ncm) compared to surface treatment type A (157 +/- 33 Ncm) was found after 52 weeks of implantation in sheep due to differences in microroughness of both types of screws. It was also shown that the specification of the parameters Delta(a), R(a) and R(q) was not sufficient to characterize the properties of the implant surfaces. The analysis of R(q) parameter over wavelengths was required to characterize the size, shape and distribution of the implant surface structures.