Redox reactions between acetonitrile and nitrogen dioxide in the interlayer space of fluorinated graphite matrices.

The interlayer space of 2D materials can be a slit reactor where transformations not typical for the gas phase occur. We report redox reactions involving acetonitrile and nitrogen oxide guests in galleries of fluorinated graphite. Fluorinated graphite intercalation compounds with acetonitrile are treated with dinitrogen tetraoxide and the synthesis products are studied by a set of experimental methods. Data analysis reveals that N2O4 dissociates in fluorinated graphite matrices to form nitrogen-containing species NO3, NO2, NO, and N2. The interaction of NO3 with acetonitrile yields HNO3, which predominates as a guest in the synthesis products independently of the fluorination degree of the matrix. This reaction is accompanied by the removal of fluorine atoms weakly bonded to the graphite layers, leading to partial defluorination of the matrices. Our work demonstrates the possibility of using fluorinated graphite as a test nanoreactor whose dimension can be controlled by fluorination of the layers.

Structure of Diamond Films Grown Using High-Speed Flow of a Thermally Activated CH4-H2 Gas Mixture.

Diamond films are advanced engineering materials for various industrial applications requiring a coating material with extremely high thermal conductivity and low electrical conductivity. An approach for the synthesis of diamond films via high-speed jet deposition of thermally activated gas has been applied. In this method, spatially separated high-speed flows of methane and hydrogen were thermally activated, and methyl and hydrogen radicals were deposited on heated molybdenum substrates. The morphology and structure of three diamond films were studied, which were synthesized at a heating power of 900, 1700, or 1800 W, methane flow rate of 10 or 30 sccm, hydrogen flow rate of 1500 or 3500 sccm, and duration of the synthesis from 1.5 to 3 h.The morphology and electronic state of the carbon on the surface and in the bulk of the obtained films were analyzed by scanning electron microscopy, Raman scattering, X-ray photoelectron, and near-edge X-ray absorption fine structure spectroscopies. The diamond micro-crystals with a thick oxidized amorphous sp2-carbon coating were grown at a heating power of 900 W and a hydrogen flow rate of 1500 sccm. The quality of the crystals was improved, and the growth rate of the diamond film was increased seven times when the heating power was 1700-1800 W and the methane and hydrogen flow rates were 30 and 3500 sccm, respectively. Defective octahedral diamond crystals of 30 µm in size with a thin sp2-carbon surface layer were synthesized on a Mo substrate heated at 1273 K for 1.5 h. When the synthesis duration was doubled, and the substrate temperature was decreased to 1073 K, the denser film with rhombic-dodecahedron diamond crystals was grown. In this case, the thinnest hydrogenated sp2-carbon coating was detected on the surface of the diamond crystals.

Charge polarization in partially lithiated single-walled carbon nanotubes.

Investigation of carbon/lithium interfaces is of great importance for elaboration of energy storage devices. Here, the effect of vacuum thermal deposition of lithium on single-walled carbon nanotubes (SWCNTs) is investigated by in situ X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure spectroscopy. From the XPS data, the composition of lithiated sample is LiC24. That corresponds to the presence of two types of carbon atoms on the SWCNT surface, namely, those located closely and far away from the adsorbed lithium. Quantum-chemical modeling of XPS valence-band spectra and calculation of atomic charges and molecular electrostatic potential map found that the former type of carbon atoms is in strong positive electric field created by lithium, whereas the Li-free SWCNT areas are charged negatively. An alternation of areas of positive potential and negative potential on the surface of partially lithiated SWCNTs can significantly affect processes in an electrochemical cell.

Controlling pyridinic, pyrrolic, graphitic, and molecular nitrogen in multi-wall carbon nanotubes using precursors with different N/C ratios in aerosol assisted chemical vapor deposition.

Nitrogen-containing multi-wall carbon nanotubes (N-MWCNTs) were synthesized using aerosol assisted chemical vapor deposition (CVD) techniques in conjunction with benzylamine:ferrocene or acetonitrile:ferrocene mixtures. Different amounts of toluene were added to these mixtures in order to change the N/C ratio of the feedstock. X-ray photoelectron and near-edge X-ray absorption fine structure spectroscopy detected pyridinic, pyrrolic, graphitic, and molecular nitrogen forms in the N-MWCNT samples. Analysis of the spectral data indicated that whilst the nature of the nitrogen-containing precursor has little effect on the concentrations of the different forms of nitrogen in N-MWCNTs, the N/C ratio in the feedstock appeared to be the determining factor. When the N/C ratio was lower than ca. 0.01, all four forms existed in equal concentrations, for N/C ratios above 0.01, graphitic and molecular nitrogen were dominant. Furthermore, higher concentrations of pyridinic nitrogen in the outer shells and N2 molecules in the core of the as-produced N-MWCNTs suggest that the precursors were decomposed into individual atoms, which interacted with the catalyst surface to form CN and NH species or in fact diffused through the bulk of the catalyst particles. These findings are important for a better understanding of possible growth mechanisms for heteroatom-containing carbon nanotubes (CNTs) and therefore paving the way for controlling the spatial distribution of foreign elements in the CNTs using CVD processes.

Field emission luminescence of nanodiamonds deposited on the aligned carbon nanotube array.

Detonation nanodiamonds (NDs) were deposited on the surface of aligned carbon nanotubes (CNTs) by immersing a CNT array in an aqueous suspension of NDs in dimethylsulfoxide (DMSO). The structure and electronic state of the obtained CNT-ND hybrid material were studied using optical and electron microscopy and Infrared, Raman, X-ray photoelectron and near-edge X-ray absorption fine structure spectroscopy. A non-covalent interaction between NDs and CNT and preservation of vertical orientation of CNTs in the hybrid were revealed. We showed that current-voltage characteristics of the CNT-ND cathode are changed depending on the applied field; below ~3 V/µm they are similar to those of the initial CNT array and at the higher field they are close to the ND behavior. Involvement of the NDs in field emission process resulted in blue luminescence of the hybrid surface at an electric field higher than 3.5 V/µm. Photoluminescence measurements showed that the NDs emit blue-green light, while blue luminescence prevails in the CNT-ND hybrid. The quenching of green luminescence was attributed to a partial removal of oxygen-containing groups from the ND surface as the result of the hybrid synthesis.

"Butterfly effect" in CuO/graphene composite nanosheets: a small interfacial adjustment triggers big changes in electronic structure and Li-ion storage performance.

Generally speaking, excellent electrochemical performance of metal oxide/graphene nanosheets (GNSs) composite is attributed to the interfacial interaction (or "synergistic effect") between constituents. However, there are no any direct observations on how the electronic structure is changed and how the properties of Li-ion storage are affected by adjusting the interfacial interaction, despite of limited investigations on the possible nature of binding between GNSs and metal oxide. In this paper, CuO nanosheets/GNSs composites with a little Cu2O (ca. 4 wt %) were utilized as an interesting model to illustrate directly the changes of interfacial nature as well as its deep influence on the electronic structure and Li-ion storage performance of composite. The interfacial adjustment was successfully fulfilled by removal of Cu2O in the composite by NH3·H2O. Formation of Cu-O-C bonds on interfaces both between CuO and GNSs, and Cu2O and GNSs in the original CuO/GNSs composites was detected. The small interfacial alteration by removal of the little Cu2O results in the obvious changes in electronic structure, such as weakening of covalent Cu-O-C interfacial interaction and recovery of π bonds in graphene, and simultaneously leads to variations in electrochemical performance of composites, including a 21% increase of reversible capacity, degradation of cyclic stability and rate-performance, and obvious increase of charge-transfer resistance, which can be called a "butterfly effect" in graphene-based metal oxide composites. These interesting phenomena could be helpful to design not only the high-performance graphene/metal oxide anode materials but also various advanced graphene-based composites used in the other fields such as sensors, catalysis, fuel cells, solar cells, etc.

A comparative study of argon ion irradiated pristine and fluorinated single-wall carbon nanotubes.

Effect of Ar(+) ion irradiation on the structure of pristine and fluorinated single-wall carbon nanotubes (SWCNTs) was examined using transmission electron microscopy (TEM), Raman, and x-ray photoelectron spectroscopy (XPS). The TEM analysis revealed retention of tubular structures in both irradiated samples while Raman spectroscopy and XPS data indicated a partial destruction of nanotubes and formation of oxygen-containing groups on the nanotube surface. From similarity of electronic states of carbon in the irradiated pristine and fluorinated SWCNTs observed by XPS, it was suggested that defluorination of nanotubes proceeded with breaking of C-F bonds.