ABSTRACT
The evolution of the magnetic anisotropy directions has been studied in a magnetite (Fe3O4) thin film grown by infrared pulsed-laser deposition on SrTiO3(100):Nb substrate. The magnetic easy axes at room temperature are found along the in-plane ã100ã film directions, which means a rotation of the easy axis by 45° with respect to the directions typically reported for bulk magnetite and films grown on single-crystal substrates. Moreover, when undergoing the Verwey transition temperature, TV, the easy axis orientation evolves to the ã110ã film directions. This anomalous behavior has been demonstrated by measuring first the angular dependence of coercivity and remanence well above and below TV by high-resolution vectorial magneto-optical Kerr effect (v-MOKE). Ferromagnetic resonance (FMR) measurements have additionally proven a well-defined fourfold magnetic anisotropy induced during growth with confirmed easy axis directions along ã100ã for T > TV and ã110ã for T < TV. These results provide a clear proof of the possibility of tuning magnetic anisotropy in Fe3O4 thin films by proper control on the growth parameters and substrate choice.
ABSTRACT
The layered organic compounds, kappa-(BEDT-TTF)2Cu[N(CN)2]X X=Cl, Br) are metals at ambient temperatures. At low temperatures, the Cl compound is a weakly ferromagnetic Mott insulator while the isostructural Br compound is a superconductor. We find by conduction electron spin resonance and antiferromagnetic resonance (AFMR) an extreme anisotropy of spin transport and magnetic interactions in these materials. In the metallic state spin diffusion is confined to single molecular layers within the spin lifetime of 10(-9) s. Electrons diffuse several hundreds of nm without interlayer hopping. In the magnetically ordered insulating phase of the Cl compound we observe and calculate the four AFMR modes of the weakly coupled single molecular layers. The interplane exchange field is comparable or less than the typically 1 mT dipolar field and almost 10(6) times less than the intralayer exchange field.
ABSTRACT
We present a newly-developed microwave probe for performing sensitive high-field/multi-frequency electron spin resonance (ESR) measurements under high hydrostatic pressures. The system consists of a BeCu-made pressure-resistant vessel, which accommodates the investigated sample and a diamond microwave coupling window. The probe's interior is completely filled with a pressure-transmitting fluid. The setup operates in reflection mode and can easily be assembled with a standard oversized microwave circuitry. The probe-head withstands hydrostatic pressures up to 1.6 GPa and interfaces with our home-built quasi-optical high-field ESR facility, operating in a millimeter/submillimeter frequency range of 105-420 GHz and in magnetic fields up to 16 T. The overall performance of the probe was tested, while studying the pressure-induced changes in the spin-relaxation mechanisms of a quasi-1D conducting polymer, KC(60). The preliminary measurements revealed that the probe yields similar signal-to-noise ratio to that of commercially available low-frequency ESR spectrometers. Moreover, by observing the conduction electron spin resonance (CESR) linewidth broadening for KC(60) in an unprecedented microwave frequency range of 210-420 GHz and in the pressure range of up to 1.6 GPa, we demonstrate that a combination of high-pressure ESR probe and high-field/multi-frequency spectrometer allows us to measure the spin relaxation rates in conducting spin systems, like the quasi-1D conductor, KC(60).
Subject(s)
Algorithms , Electron Spin Resonance Spectroscopy/instrumentation , Electron Spin Resonance Spectroscopy/methods , Specimen Handling/instrumentation , Infrared Rays , Pressure , Reproducibility of Results , Sensitivity and Specificity , Specimen Handling/methodsABSTRACT
We report the development of the frequency-modulation (FM) method for measuring electron spin resonance (ESR) absorption in the 210- to 420GHz frequency range. We demonstrate that using a high-frequency ESR spectrometer without resonating microwave components enables us to overcome technical difficulties associated with the FM method due to nonlinear microwave-elements, without sacrificing spectrometer performance. FM was achieved by modulating the reference oscillator of a 13GHz Phase-Locked Dielectric Resonator Oscillator, and amplifying and frequency-multiplying the resulting millimeter-wave radiation up to 210, 315 and 420GHz. ESR spectra were obtained in reflection mode by a lock-in detection at the fundamental modulation frequency, and also at the second and third harmonic. Sensitivity of the setup was verified by conduction electron spin resonance measurement in KC60.
ABSTRACT
Hole induced changes in the antiferromagnetic structure of a lightly Ca doped Gd:Y(1-x)CaxBa2Cu3O6 copper oxide single crystal with x approximately 0.008 is investigated by Gd3+ electron spin resonance. Holes do not localize to Ca2+ ions above 2.5 K since the charge distribution and spin susceptibility next to the Ca2+ are independent of temperature. Both hole doped and pristine crystals are magnetically twinned with an external magnetic field dependent antiferromagnetic domain structure. Unlike the undoped crystal, where the easy magnetic axis is along [100] at all temperatures, the easy direction in the hole doped crystal is along the [110] diagonal at low temperatures and changes gradually to the [100] direction between 10 and 100 K. The transition is tentatively attributed to a magnetic anisotropy introduced by hole ordering.
