Modeling the effect of patient size on cerebral perfusion during veno-arterial extracorporeal membrane oxygenation.

INTRODUCTION: A well-known complication of veno-arterial extracorporeal membrane oxygenation (VA ECMO) is differential hypoxia, in which poorly-oxygenated blood ejected from the left ventricle mixes with and displaces well-oxygenated blood from the circuit, thereby causing cerebral hypoxia and ischemia. We sought to characterize the impact of patient size and anatomy on cerebral perfusion under a range of different VA ECMO flow conditions. METHODS: We use one-dimensional (1D) flow simulations to investigate mixing zone location and cerebral perfusion across 10 different levels of VA ECMO support in eight semi-idealized patient geometries, for a total of 80 scenarios. Measured outcomes included mixing zone location and cerebral blood flow (CBF). RESULTS: Depending on patient anatomy, we found that a VA ECMO support ranging between 67-97% of a patient's ideal cardiac output was needed to perfuse the brain. In some cases, VA ECMO flows exceeding 90% of the patient's ideal cardiac output are needed for adequate cerebral perfusion. CONCLUSIONS: Individual patient anatomy markedly affects mixing zone location and cerebral perfusion in VA ECMO. Future fluid simulations of VA ECMO physiology should incorporate varied patient sizes and geometries in order to best provide insights toward reducing neurologic injury and improved outcomes in this patient population.

Identifying constitutive and context-specific molecular-tension-sensitive protein recruitment within focal adhesions.

Mechanosensitive processes often rely on adhesion structures to strengthen, or mature, in response to applied loads. However, a limited understanding of how the molecular tensions that are experienced by a particular protein affect the recruitment of other proteins represents a major obstacle in the way of deciphering molecular mechanisms that underlie mechanosensitive processes. Here, we describe an imaging-based technique, termed fluorescence-tension co-localization (FTC), for studying molecular-tension-sensitive protein recruitment inside cells. Guided by discrete time Markov chain simulations of protein recruitment, we integrate immunofluorescence labeling, molecular tension sensors, and machine learning to determine the sensitivity, specificity, and context dependence of molecular-tension-sensitive protein recruitment. The application of FTC to the mechanical linker protein vinculin in mouse embryonic fibroblasts reveals constitutive and context-specific molecular-tension-sensitive protein recruitment that varies with adhesion maturation. FTC overcomes limitations associated with the alteration of numerous proteins during the manipulation of cell contractility, providing molecularly specific insights into tension-sensitive protein recruitment.

Global Sensitivity Analysis For Clinically Validated 1D Models of Fractional Flow Reserve.

Computation of Fractional Flow Reserve (FFR) through computational fluid dynamics (CFD) is used to guide intervention and often uses a number of clinically-derived metrics, but these patient-specific data could be costly and difficult to obtain. Understanding which parameters can be approximated from population averages and which parameters need to be patient-specific is important and remains largely unexplored. In this study, we performed a global sensitivity study on two 1D models of FFR to identify the most influential patient parameters. Our results indicated that vessel compliance, cardiac cycle period, flow rate, density, viscosity, and elastic modulus contributed minimally to the variance in FFR and may be approximated from population averages. On the other hand, outlet resistance (i.e., microvascular resistance), stenosis degree, and percent stenosis length contributed the most to FFR computation and needed to be tuned to the patient of interest. Selective measuring of patient-specific parameters may significantly reduce costs and streamline the simulation pipeline without reducing accuracy.

Multiscale modeling of blood flow to assess neurological complications in patients supported by venoarterial extracorporeal membrane oxygenation.

Computational blood flow models in large arteries elucidate valuable relationships between cardiovascular diseases and hemodynamics, leading to improvements in treatment planning and clinical decision making. One such application with potential to benefit from simulation is venoarterial extracorporeal membrane oxygenation (VA-ECMO), a support system for patients with cardiopulmonary failure. VA-ECMO patients develop high rates of neurological complications, partially due to abnormal blood flow throughout the vasculature from the VA-ECMO system. To better understand these hemodynamic changes, it is important to resolve complex local flow parameters derived from three-dimensional (3D) fluid dynamics while also capturing the impact of VA-ECMO support throughout the systemic arterial system. As high-resolution 3D simulations of the arterial network remain computationally expensive and intractable for large studies, a validated, multiscale model is needed to compute both global effects and high-fidelity local hemodynamics. In this work, we developed and demonstrated a framework to model hemodynamics in VA-ECMO patients using coupled 3D and one-dimensional (1D) models (1D→3D). We demonstrated the ability of these multiscale models to simulate complex flow patterns in specific regions of interest while capturing bulk flow throughout the systemic arterial system. We compared 1D, 3D, and 1D→3D coupled models and found that multiscale models were able to sufficiently capture both global and local hemodynamics in the cerebral arteries and aorta in VA-ECMO patients. This study is the first to develop and compare 1D, 3D, and 1D→ 3D coupled models on the larger arterial system scale in VA-ECMO patients, with potential use for other large scale applications.

Accelerating massively parallel hemodynamic models of coarctation of the aorta using neural networks.

Comorbidities such as anemia or hypertension and physiological factors related to exertion can influence a patient's hemodynamics and increase the severity of many cardiovascular diseases. Observing and quantifying associations between these factors and hemodynamics can be difficult due to the multitude of co-existing conditions and blood flow parameters in real patient data. Machine learning-driven, physics-based simulations provide a means to understand how potentially correlated conditions may affect a particular patient. Here, we use a combination of machine learning and massively parallel computing to predict the effects of physiological factors on hemodynamics in patients with coarctation of the aorta. We first validated blood flow simulations against in vitro measurements in 3D-printed phantoms representing the patient's vasculature. We then investigated the effects of varying the degree of stenosis, blood flow rate, and viscosity on two diagnostic metrics - pressure gradient across the stenosis (ΔP) and wall shear stress (WSS) - by performing the largest simulation study to date of coarctation of the aorta (over 70 million compute hours). Using machine learning models trained on data from the simulations and validated on two independent datasets, we developed a framework to identify the minimal training set required to build a predictive model on a per-patient basis. We then used this model to accurately predict ΔP (mean absolute error within 1.18 mmHg) and WSS (mean absolute error within 0.99 Pa) for patients with this disease.

Determining the impacts of venoarterial extracorporeal membrane oxygenation on cerebral oxygenation using a one-dimensional blood flow simulator.

Venoarterial extracorporeal membrane oxygenation (VA-ECMO) is a mechanical system that provides rapid and short-term support for patients with cardiac failure. In many patients, pulmonary function is also impaired, resulting in poorly-oxygenated cardiac outflow competing against well-oxygenated VA-ECMO outflow, a condition known as North-South syndrome. North-South syndrome is a primary concern because of its potential to cause cerebral hypoxia, which has a critical influence on neurological complications often seen in this patient population. In order to reduce ischemic neurological complications, it is important to understand how clinical decisions regarding VA-ECMO parameters influence blood oxygenation. Here, we studied the impacts of flow rate and cannulation site on oxygenation using a one-dimensional (1D) model to simulate blood flow. Our model was initially tested by comparing blood flow results to those observed from experimental work in VA-ECMO patients. The 1D model was combined with a two-phase flow model to simulate oxygenation. Additionally, the influence of various other clinician-tunable parameters on oxygenation in the common carotid arteries (CCAs) were tested, including, blood viscosity, cannula position within the insertion artery, heart rate, and systemic vascular resistance (SVR), as well as geometrical changes such as arterial radius and length. Our results indicated that blood oxygenation to the brain strongly depended on the cannula insertion site and the VA-ECMO flow rate with a weaker but potentially significant dependence on arterial radius. During femoral cannulation, VA-ECMO flow rates greater than ~4.9L/min were needed to perfuse the CCAs. However, axillary and central cannulation began to perfuse the CCAs at significantly lower flow (~1L/min). These results may help explain the incidence of cerebral hypoxia in this patient population and the common need to change cannulation strategies during treatment to address this clinical problem. While this work describes patient-averaged results, determining these relationships between VA-ECMO parameters and cerebral hypoxia is an important step towards future work to develop patient-specific models that clinicians can use to improve outcomes.

Suitability of lattice Boltzmann inlet and outlet boundary conditions for simulating flow in image-derived vasculature.

The lattice Boltzmann method (LBM) is a popular alternative to solving the Navier-Stokes equations for modeling blood flow. When simulating flow using the LBM, several choices for inlet and outlet boundary conditions exist. While boundary conditions in the LBM have been evaluated in idealized geometries, there have been no extensive comparisons in image-derived vasculature, where the geometries are highly complex. In this study, the Zou-He (ZH) and finite difference (FD) boundary conditions were evaluated in image-derived vascular geometries by comparing their stability, accuracy, and run times. The boundary conditions were compared in four arteries: a coarctation of the aorta, dissected aorta, femoral artery, and left coronary artery. The FD boundary condition was more stable than ZH in all four geometries. In general, simulations using the ZH and FD method showed similar convergence rates within each geometry. However, the ZH method proved to be slightly more accurate compared with experimental flow using three-dimensional printed vasculature. The total run times necessary for simulations using the ZH boundary condition were significantly higher as the ZH method required a larger relaxation time, grid resolution, and number of time steps for a simulation representing the same physiological time. Finally, a new inlet velocity profile algorithm is presented for complex inlet geometries. Overall, results indicated that the FD method should generally be used for large-scale blood flow simulations in image-derived vasculature geometries. This study can serve as a guide to researchers interested in using the LBM to simulate blood flow.