ABSTRACT
Pinch milling is a new technique for slender and long blade machining, which can simultaneously improve the machining quality and efficiency. However, two-cutter orientation planning is a major challenge due to the irregular blade surfaces and the structural constraints of nine-axis machine tools. In this paper, a method of twin-tool smoothing orientation determination is proposed for a thin-walled blade with pinch milling. Considering the processing status of the two cutters and workpiece, the feasible domain of the twin-tool axis vector and its characterization method are defined. At the same time, an evaluation algorithm of global and local optimization is proposed, and a smoothing algorithm is explored within the feasible domain along the two tool paths. Finally, a set of smoothly aligned tool orientations are generated, and the overall smoothness is nearly globally optimized. A preliminary simulation verification of the proposed algorithm is conducted on a turbine blade model and the planning tool orientation is found to be stable, smooth, and well formed, which avoids collision interference and ultimately improves the machining accuracy of the blade with difficult-to-machine materials.
ABSTRACT
In this paper, we report on the discovery of a spinel compound, Co0.7Al2S4, which was synthesized at high-pressure. The systematic characterizations were carried out by structural, magnetic, and heat capacity measurements. The compound crystallizes into a cubic structure with the space group Fd3Ì m (no. 227) and the lattice constant a = 9.9580(1) Å. Magnetic susceptibility measurements suggest that Co0.7Al2S4 exhibits a spin glass ground state, freezing at Tf â¼ 7.2 K with a Weiss temperature Tθ â¼ -115.9 K, which is verified by ac magnetic susceptibility and heat capacity measurements. The frustration parameter f for Co0.7Al2S4 is calculated to be about 16.6, based on the formula f = | Tθ/Tf |, indicating that Co0.7Al2S4 is a high-frustration magnet. Specific heat data displays a T2 dependence below the freezing temperature, which is different from the linear dependence observed in a common spin glass system. Compared with the similar compound CoAl2O4, it is suggested that the vacancies in the Co sites should be responsible for the occurrence of the spin glass behavior of Co0.7Al2S4.
ABSTRACT
A spinel compound FeAl2S4 was successfully synthesized under high-pressure and high-temperature conditions and was systematically characterized via the structural, magnetic, and specific heat measurements. It crystallizes into a cubic structure with the space group Fd3Ì m (no. 227) and the lattice constant a = 10.0207(2) Å. A Fe/Al site inversion is found; that is, the molecular formula can be rewritten as (Fe1-xAlx)(Al2-xFex)S4, and the inversion parameter x is about 0.22. Magnetic susceptibility measurements indicate that FeAl2S4 undergoes a spin glass behavior, which is confirmed by ac susceptibility and specific heat measurements. The freezing temperature Tf â¼ 10.5 K and Weiss temperature Tθ â¼ -107.4 K lead to a high frustration parameter f = |Tθ/Tf| of about 10, which suggests that FeAl2S4 is a high-frustration magnet. Our results indicate that high pressure can help stabilize the spinel structure with small RÌ σ and the cation inversion plays an important role in the formation of the spin glass state.
ABSTRACT
We report a comprehensive characterization of a 10 at.% Yb3+-doped YSAG (Yb:Y3ScxAl(5-x)O12, x = 1.5) ceramic, including microstructural, spectroscopic and laser properties. Moreover, we illustrate and discuss the fabrication technique. Yb3+ in YSAG features a broader absorption and emission band than in traditional YAG, which is advantageous for laser applications (i.e., tunable laser sources, ultrafast pulse generation). Pumping in a quasi continuous wave regime at 936 nm, the ceramic has shown good laser performance as the maximum output power was 6.3 W with a corresponding slope efficiency (ηs) of 67.8%. In continuous wave regime instead, the maximum output power was 5 W with ηs = 52.7%. The laser emission wavelengths in free running were λL = 1051 nm and λL = 1031 nm, depending on the output coupler transmission. Finally, by a tunable cavity we obtained laser emission spanning from 991.5 to 1073 nm, i.e., 81.5 nm, which is the broadest tuning range ever reported for this material, to the best of our knowledge.
