Lung stiffness of C57BL/6 versus BALB/c mice.

This study was undertaken to determine whether a smaller lung volume or a stiffer lung tissue accounts for the greater lung elastance of C57BL/6 than BALB/c mice. The mechanical properties of the respiratory system and lung volumes were measured with the flexiVent and compared between male C57BL/6 and BALB/c mice (n = 9). The size of the excised lung was also measured by volume liquid displacement. One lobe was then subjected to sinusoidal strains in vitro to directly assess the mechanical properties of the lung tissue, and another one was used to quantify the content of hydroxyproline. In vivo elastance was markedly greater in C57BL/6 than BALB/c mice based on 5 different readouts. For example, respiratory system elastance was 24.5 ± 1.7 vs. 21.5 ± 2.4 cmH2O/mL in C57BL/6 and BALB/c mice, respectively (p = 0.007). This was not due to a different lung volume measured by displaced liquid volume. On the isolated lobes, both elastance and the hydroxyproline content were significantly greater in C57BL/6 than BALB/c mice. These results suggest that the lung elastance of C57BL/6 mice is greater than BALB/c mice not because of a smaller lung volume but because of a stiffer lung tissue due to a greater content of collagen.

Sensitive physiological readouts to evaluate countermeasures for lipopolysaccharide-induced lung alterations in mice.

Despite decades of research, studies investigating the physiological alterations caused by an acute bout of inflammation induced by exposing the lung to lipopolysaccharide have yielded inconsistent results. This can be attributed to small effects and/or a lack of fitted physiological testing. Herein, a comprehensive investigation of lung mechanics was conducted on 270 male C57BL/6 mice at 24, 48, or 96 h after an intranasal exposure to saline or lipopolysaccharide at either 1 or 3 mg/kg (30 mice per group). Traditional techniques that probe the lung using small-amplitude perturbations (i.e., oscillometry) were used, together with less conventional and new techniques that probe the lung using maneuvers of large amplitudes. The latter include a partial and a full-range pressure-volume maneuvers to measure quasi-static elastance, compliance, total lung volume, vital capacity, and residual volume. The results demonstrate that lung mechanics assessed by oscillometry was only slightly affected by lipopolysaccharide, confirming previous findings. In contradistinction, lipopolysaccharide markedly altered mechanics when the lung was probed with maneuvers of large amplitudes. With the dose of 3 mg/kg at the peak of inflammation (48 h postexposure), lipopolysaccharide increased quasi-static elastance by 26.7% (P < 0.0001) and decreased compliance by 34.5% (P < 0.0001). It also decreased lung volumes, including total lung capacity, vital capacity, and residual volume by 33.3%, 30.5%, and 43.3%, respectively (all P < 0.0001). These newly reported physiological alterations represent sensitive outcomes to efficiently evaluate countermeasures (e.g., drugs) in the context of several lung diseases.

Effects of airway smooth muscle contraction and inflammation on lung tissue compliance.

There are renewed interests in using the parameter K of Salazar-Knowles' equation to assess lung tissue compliance. K either decreases or increases when the lung's parenchyma stiffens or loosens, respectively. However, whether K is affected by other common features of respiratory diseases, such as inflammation and airway smooth muscle (ASM) contraction, is unknown. Herein, male C57BL/6 mice were treated intranasally with either saline or lipopolysaccharide (LPS) at 1 mg/kg to induce pulmonary inflammation. They were then subjected to either a multiple or a single-dose challenge with methacholine to activate ASM to different degrees. A quasi-static pressure-driven partial pressure-volume (P-V) maneuver was performed before and after methacholine. The Salazar-Knowles' equation was then fitted to the deflation limb of the P-V loop to obtain K, as well as the parameter A, an estimate of lung volume (inspiratory capacity). The fitted curve was also used to derive the quasi-static elastance (Est) at 5 cmH2O. The results demonstrate that LPS and both methacholine challenges increased Est. LPS also decreased A, but did not affect K. In contradistinction, methacholine decreased both A and K in the multiple-dose challenge, whereas it decreased K but not A in the single-dose challenge. These results suggest that LPS increases Est by reducing the open lung volume (A) and without affecting tissue compliance (K), whereas methacholine increases Est by decreasing tissue compliance with or without affecting lung volume. We conclude that lung tissue compliance, assessed using the parameter K of Salazar-Knowles' equation, is insensitive to inflammation but sensitive to ASM contraction.

Airway compliance measurements in mouse models of respiratory diseases.

The quantification of airway compliance (Caw) is essential to the study of airway alterations in disease models. However, the required measurements of airway pressure and volume are difficult to acquire in mice. We hypothesized that the inflation limb of full-range pressure-volume (PV) curves could be used to quantify Caw, as it contains a segment where only the airway tree is distended. The study objective was to assess the feasibility of the approach by analysis of full-range PV curves previously collected in three mouse models: an elastase model of emphysema, a genetic model spontaneously developing emphysema (leukotriene C4 synthase knockout; LTC4S-KO), and a bleomycin model of lung fibrosis. Attempts to validate results included Caw change relative to respiratory system compliance (ΔCaw/ΔC), the minute work of breathing (mWOB), and the elastance at 20.5 Hz (Ers_20.5) from prior respiratory mechanics measurements in the same subjects. Caw was estimated at 3% of total compliance in healthy mice or 2.3 ± 1 µL/cmH2O (n = 17). The technique detected changes in models of respiratory obstructive and restrictive diseases relative to control mice as well as differences in the two emphysema models studied. The changes in Caw were consistent with those seen in ΔCaw/ΔC, mWOB, or Ers_20.5, with some variations according to the model, as well as with results reported in the literature in humans and mice. Direct Caw measurements in subjects as small as mice could prove useful to further characterize other respiratory disease models associated with airway remodeling or to assess treatment effects.

Intranasal versus intratracheal exposure to lipopolysaccharides in a murine model of acute respiratory distress syndrome.

Due to frequent and often severe lung affections caused by COVID-19, murine models of acute respiratory distress syndrome (ARDS) are increasingly used in experimental lung research. The one induced by a single lipopolysaccharide (LPS) exposure is practical. However, whether it is preferable to administer LPS intranasally or intratracheally remains an open question. Herein, female C57Bl/6 J mice were exposed intranasally or intratracheally to one dose of either saline or 3 mg/kg of LPS. They were studied 24 h later. The groups treated with LPS, either intranasally or intratracheally, exhibited a pronounced neutrophilic inflammation, signs of lung tissue damage and protein extravasation into the alveoli, and mild lung dysfunction. The magnitude of the response was generally not different between groups exposed intranasally versus intratracheally. However, the variability of some the responses was smaller in the LPS-treated groups exposed intranasally versus intratracheally. Notably, the saline-treated mice exposed intratracheally demonstrated a mild neutrophilic inflammation and alterations of the airway epithelium. We conclude that an intranasal exposure is as effective as an intratracheal exposure in a murine model of ARDS induced by LPS. Additionally, the groups exposed intranasally demonstrated less variability in the responses to LPS and less complications associated with the sham procedure.

Automated full-range pressure-volume curves in mice and rats.

Pressure-volume (PV) curves constructed over the entire lung volume range can reliably detect functional changes in mouse models of lung diseases. In the present study, we constructed full-range PV curves in healthy and elastase-treated mice using either a classic manually operated technique or an automated approach using a computer-controlled piston ventilator [flexiVent FX; Scientific Respiratory Equipment (SCIREQ), Montreal, Quebec, Canada]. On the day of the experiment, subjects were anesthetized, tracheotomized, and mechanically ventilated. Following an initial respiratory mechanics scan and degassing of the lungs with 100% O2, full-range PV curves were constructed using either the classic or the automated technique. In control mice, superimposable curves were obtained, and statistical equivalence was attained between the two methodologies. In the elastase-treated ones, where significant changes in respiratory mechanics and lung volumes were expected, very small differences were observed between the two techniques, and the criteria for statistical equivalence were met in two out of four parameters assessed. The automated technique was adapted to rats and used to estimate the functional residual capacity (FRC) by volume subtraction. This novel approach generated FRC estimates consistent with the literature, with added accuracy relative to the existing method in diseased subjects. In conclusion, the automated technique generated full-range PV curves that were equivalent or very close to those obtained with the classic method under physiological or severe pathological conditions. The automation facilitated some technical aspects of the procedure, eased its use across species, and helped derive a more accurate estimate of FRC in preclinical models of respiratory disease.NEW & NOTEWORTHY Partial and full-range pressure-volume (PV) curves are frequently used to characterize lung disease models. Whereas automated techniques exist to construct partial PV curves, a manually operated approach is classically employed to build the full-range ones. In this study, the full-range PV curve technique was automated using a computer-controlled piston ventilator. The automation simplified the technique, facilitated its extension to other species, and inspired a novel way of estimating the functional residual capacity in laboratory rodents.

Mechanical consequences of allergic induced remodeling on mice airway resistance and compressibility.

The effect of remodeling on airway function is uncertain. It may affect airway compressibility during forced expirations differently than airflow resistance, providing a tool for its assessment. The aim of the current study was to compare the effects of acute and chronic antigen challenge on methacholine-induced bronchoconstriction assessed from resistance and maximal tidal expiratory flow. Balb/C mice were sensitized with ovalbumin (OVA) and challenged either daily for three days with intra-nasal OVA or daily for 5 days and three times a week for 5 subsequent weeks. Acute and chronic allergen challenge induced airway hyperresponsiveness (AHR) to methacholine. However the relationship between maximal tidal expiratory flow and resistance during methacholine challenge was different between the two conditions, suggesting that the determinants of AHR are not identical following acute and chronic allergen exposure. We conclude that the contrast of changes in maximal tidal expiratory flow and respiratory resistance during methacholine-induced bronchoconstriction may allow the detection of the mechanical consequences of airway remodeling.

Delivered dose estimate to standardize airway hyperresponsiveness assessment in mice.

Airway hyperresponsiveness often constitutes a primary outcome in respiratory studies in mice. The procedure commonly employs aerosolized challenges, and results are typically reported in terms of bronchoconstrictor concentrations loaded into the nebulizer. Yet, because protocols frequently differ across studies, especially in terms of aerosol generation and delivery, direct study comparisons are difficult. We hypothesized that protocol variations could lead to differences in aerosol delivery efficiency and, consequently, in the dose delivered to the subject, as well as in the response. Thirteen nebulization patterns containing common protocol variations (nebulization time, duty cycle, particle size spectrum, air humidity, and/or ventilation profile) and using increasing concentrations of methacholine and broadband forced oscillations (flexiVent, SCIREQ, Montreal, Qc, Canada) were created, characterized, and studied in anesthetized naïve A/J mice. A delivered dose estimate calculated from nebulizer-, ventilator-, and subject-specific characteristics was introduced and used to account for protocol variations. Results showed that nebulization protocol variations significantly affected the fraction of aerosol reaching the subject site and the delivered dose, as well as methacholine reactivity and sensitivity in mice. From the protocol variants studied, addition of a slow deep ventilation profile during nebulization was identified as a key factor for optimization of the technique. The study also highlighted sensitivity differences within the lung, as well as the possibility that airway responses could be selectively enhanced by adequate control of nebulizer and ventilator settings. Reporting results in terms of delivered doses represents an important standardizing element for assessment of airway hyperresponsiveness in mice.

Comparative study of three flexiVent system configurations using mechanical test loads.

The sole commercial system currently employing the forced oscillation technique (FOT) in small laboratory animals (flexiVent; SCIREQ Inc., Canada) was recently redesigned along with its operating software. Yet, many users still work with the legacy version or a mixed configuration. This study aimed to compare result accuracy and precision between three flexiVent system configurations and to quantify the impact of configuration changes on measured parameters. Physiologically relevant resistance or elastance were measured at 2.5 Hz on the following three system configurations using characterized mechanical test loads: (i) legacy flexiVent-flexiVent v5.3.4 (Leg-fV5), (ii) legacy flexiVent-flexiWare v7.2.1 (Leg-fW7), and (iii) flexiVent FX-flexiWare v7.2.1 (FX-fW7). Results demonstrated measurements of high precision that were consistent between system configurations. There was no statistical difference between system configurations in terms of measuring a predicted resistance. Measurements of elastance, on the other hand, were configuration-sensitive with FX-fW7 generating values that were closer to theoretical ones than the other two configurations. The largest impact on measurement outcomes was associated with the most noteworthy configuration change (i.e., software and hardware replacement). This effect was however constrained, with variations in the order of 3-5%, approximately. In conclusion, the latest version of the sole commercial pre-clinical FOT system currently available generated results that were equivalent or better than those acquired with two other system configurations. Given that configuration changes were associated with subtle parameter differences, best practice would recommend consistency within a study and reporting the full details of the system used.

Evaluation of respiratory system mechanics in mice using the forced oscillation technique.

The forced oscillation technique (FOT) is a powerful, integrative and translational tool permitting the experimental assessment of lung function in mice in a comprehensive, detailed, precise and reproducible manner. It provides measurements of respiratory system mechanics through the analysis of pressure and volume signals acquired in reaction to predefined, small amplitude, oscillatory airflow waveforms, which are typically applied at the subject's airway opening. The present protocol details the steps required to adequately execute forced oscillation measurements in mice using a computer-controlled piston ventilator (flexiVent; SCIREQ Inc, Montreal, Qc, Canada). The description is divided into four parts: preparatory steps, mechanical ventilation, lung function measurements, and data analysis. It also includes details of how to assess airway responsiveness to inhaled methacholine in anesthetized mice, a common application of this technique which also extends to other outcomes and various lung pathologies. Measurements obtained in naïve mice as well as from an oxidative-stress driven model of airway damage are presented to illustrate how this tool can contribute to a better characterization and understanding of studied physiological changes or disease models as well as to applications in new research areas.

Effects of refrigeration and freezing on the electromechanical and biomechanical properties of articular cartilage.

In vitro electromechanical and biomechanical testing of articular cartilage provide critical information about the structure and function of this tissue. Difficulties obtaining fresh tissue and lengthy experimental testing procedures often necessitate a storage protocol, which may adversely affect the functional properties of cartilage. The effects of storage at either 4°C for periods of 6 days and 12 days, or during a single freeze-thaw cycle at -20°C were examined in young bovine cartilage. Non-destructive electromechanical measurements and unconfined compression testing on 3 mm diameter disks were used to assess cartilage properties, including the streaming potential integral (SPI), fibril modulus (Ef), matrix modulus (Em), and permeability (k). Cartilage disks were also examined histologically. Compared with controls, significant decreases in SPI (to 32.3±5.5% of control values, p<0.001), Ef (to 31.3±41.3% [corrected] of control values, p=0.046), Em (to 6.4±8.5% of control values, p<0.0001), and an increase in k (to 2676.7±2562.0% of control values, p=0.004) were observed at day 12 of refrigeration at 4°C, but no significant changes were detected at day 6. A trend toward detecting a decrease in SPI (to 94.2±6.2% of control values, p=0.083) was identified following a single freeze-thaw cycle, but no detectable changes were observed for any biomechanical parameters. All numbers are mean±95% confidence interval. These results indicate that fresh cartilage can be stored in a humid chamber at 4°C for a maximum of 6 days with no detrimental effects to cartilage electromechanical and biomechanical properties, while one freeze-thaw cycle produces minimal deterioration of biomechanical and electromechanical properties. A comparison to literature suggested that particular attention should be paid to the manner in which specimens are thawed after freezing, specifically by minimizing thawing time at higher temperatures.