Effects of fluid insert volume changes on socket pressures and shear stresses: case studies from two trans-tibial amputee subjects.

Fluid inserts potentially help to overcome prosthetic fit problems resulting from stump volume change. The purpose of this investigation was to add fluid to fluid inserts positioned on the inner socket walls of trans-tibial prostheses and to assess their influence on socket stresses. Pressures and shear stresses were measured at 13 sites on the sockets of two trans-tibial amputee subjects while they ambulated at their self-selected walking speeds. Stresses at the transducer sites generally increased with greater fluid addition and, interestingly, both subjects found relatively high fluid insert volumes most comfortable. The magnitudes of stress change were larger than those resulting from alignment, cadence, and componentry changes as reported in the literature. Possible explanations for why subjects found settings that induced higher measured socket stresses more comfortable than those that induced lower measured stresses include: A reduced shear: pressure ratio; the short duration of the study; and reduced stresses at sites not monitored with transducers.

Changes in interface pressures and shear stresses over time on trans-tibial amputee subjects ambulating with prosthetic limbs: comparison of diurnal and six-month differences.

For trans-tibial amputees maintenance over time of a quality fit of the prosthesis to the residual limb is an important clinical challenge. The purpose of this research was to compare diurnal and long-term (5 weeks to 6 months) interface stress changes as well as variance in the change in cross-sectional area down the length of the residual limb. If long-term changes were simply accentuated diurnal fluctuations then this result would suggest similar treatment methods should be used for both conditions. Interface pressures and shear stresses at 13 sites and residual limb shape were measured on eight trans-tibial amputee subjects using patellar-tendon-bearing prostheses. Data were collected at diurnal intervals (within the same day at least 5 h apart) as well as at long-term intervals (5, 10, 15, 20, and 25 weeks apart). Absolute diurnal interface stress changes were not significantly different from those at 5-weeks intervals but were significantly smaller than those at 15, 20, and 25-weeks intervals. Mean interface stress changes increased significantly (p<0.05) for increased session-to-session intervals. Variance of the change in cross-sectional area down the length of the residual limb was significantly smaller for diurnal intervals than for 6-months intervals, indicating that long-term changes were more localized than diurnal changes. These results indicate that long-term changes are not simply accentuated diurnal fluctuations, suggesting that different treatment methods should be used to treat each condition.

Interface pressure and shear stress changes with amputee weight loss: case studies from two trans-tibial amputee subjects.

Interface pressures and shear stresses were measured at monthly intervals on two trans-tibial amputee subjects who lost more than 12% of their body weight over the course of the study. For one subject interface pressures and shear stresses during the weight-acceptance phase of gait decreased over the study interval at all 13 sites monitored, while the other subject experienced increased pressures distally but decreased pressures proximally. Subjects' stumps appeared to atrophy over the study interval, increasing distal end and patellar tendon loading, but not increasing interface shear stresses at other locations. Adding socks at the end of the study did not return interface pressures to first session values at all sites. It is expected that local stump shape changes occurred, causing a non-uniform change in interface stress patterns.

Custom design in lower limb prosthetics for athletic activity.

In summary, the prosthetist is the best source of information with regard to the fast-changing lower extremity prosthetics technology for sports. The needs and desires of the amputee should be outlined and balanced with the cost of the desired components and design. In many cases, one carefully designed prosthesis can serve in dual roles for everyday ambulation and certain athletic activities. In other cases, the amputee is limited severely by a prosthesis that is not designed for a specific activity. Using a prosthesis for activities that it was not designed to accommodate can cause physical injury to the amputee as well as structural failure of the device. A properly designed and fitted prosthesis can open a whole new world of activity to the amputee and helps him or her to reach the desired a vocational goals.

Transtibial amputations.

The transtibial amputation is one of the most frequently performed major limb amputations in the United States. The long posterior flap technique has become the most frequently recommended technique; however, the surgeon performing amputations needs to be comfortable with the alternative techniques as well. Situations occasionally do arise where the sagittal or skew techniques may be more applicable. With careful surgery and soft tissue handling, wound healing can be expected in the majority of patients. Aggressive rehabilitation is possible in many patients, and with good prosthetic intervention, return to ambulation at or near the preoperative level of function can be expected in most patients.