Fully integrated sampler and dilutor in an electrochemical paper-based device for glucose sensing.

An electroanalytical platform capable to take and dilute the sample has been designed in order to fully integrate the different steps of the analytical process in only one device. The concept is based on the addition of glass-fiber pads for sampling and diluting to an electrochemical cell combining a paper-based working electrode with low-cost connector headers as counter and reference electrodes. In order to demonstrate the feasibility of this all-in-one platform for biosensing applications, an enzymatic sensor for glucose determination (requiring a potential as low as -0.1 V vs. gold-plated wire by using ferrocyanide as mediator) was developed. Real food samples, such as cola beverages and orange juice, have been analyzed with the bioelectroanalytical lab-on-paper platform. As a proof-of-concept, and trying to go further in the integration of steps, sucrose was successfully detected by depositing invertase in the sampling strip. This enzyme hydrolyzes sucrose into fructose and glucose, which was determined using the enzymatic biosensor. This approach opens the pathway for the development of devices applying the lab-on-paper concept, saving costs and time, and making possible to perform decentralized analysis with high accuracy.

Preconcentration and sensitive determination of the anti-inflammatory drug diclofenac on a paper-based electroanalytical platform.

This work describes the development of a paper-based platform for highly sensitive detection of diclofenac. The quantification of this anti-inflammatory drug is of importance in clinical (e.g. quality and therapeutic control) and environmental (e.g. emerging contaminant determination) areas. The easy-to-handle platform here described consists of a carbon-ink paper-based working electrode and two metallic wires, provided by a gold-plated standard connector, as reference and counter electrodes. The porous paper matrix enables the preconcentration of the sample, decoupling sample and detection solutions. Thus, relatively large sample volumes can be used, which significantly improves the sensitivity of the method. A wide dynamic range of four orders of magnitude, between 0.10 and 100 µM, was obtained for diclofenac determination. Due to the predominance of adsorption at the lowest concentrations, there were two linear concentration ranges: one comprised between 0.10 and 5.0 µM (with a slope of 0.85 µA µM-1) and the other between 5.0 and 100 µM (with a slope of 0.48 µA µM-1). A limit of detection of 70 nM was achieved with this simple device that provided accurate results with an RSD of ca. 5%. The platform was applied for diclofenac quantification in spiked tap water samples. The versatility of this design enabled the fabrication of a multiplexed platform containing eight electrochemical cells that work independently. The low cost, small size and simplicity of the device allow on-site analysis, which is very useful for environmental monitoring.

Sampling and multiplexing in lab-on-paper bioelectroanalytical devices for glucose determination.

In this work, we present a multiplexed (eight simultaneous measurements) paper-based electrochemical device developed in a very simple way and using low-cost materials, such as paper, carbon ink and multifunctional connector headers. Meanwhile, we have also combined the paper-based electrochemical platform with a glass-fiber strip in order to integrate easily a sampling step. Both approaches, simultaneous measuring and sampling, have been applied to the determination of glucose using bienzymatic biosensors. They are fabricated by adsorbing the mixture of enzymes (glucose oxidase and horseradish peroxidase), as well as the ferrocyanide, mediator of the electron transfer, on the paper-based electrode. After drying, the measuring solution (containing either glucose standards or samples) is added and the eight corresponding chronoamperograms are recorded. In the case of the microfluidic approach for sampling purposes, the glass-fiber pad (sampler) is immersed in a container with the solution, which flows by capillarity until it reaches the working electrode. The integration of one more step of the analytical process advances towards real and useful lab-on-a-chip devices. With these designs, a linear range comprised between 0.5 and 15 mM was achieved for glucose determination, with an excellent precision. If the sampler is employed, it is not necessary to use micropipettes and, nevertheless, precise measurements are obtained. The RSD of the slopes obtained for different calibrations performed in different days, with different arrays of electrochemical cells and different solutions is ca. 1%. Accurate results are obtained in the determination of glucose in real samples (orange fruit and cola beverages).

Paper-based maskless enzymatic sensor for glucose determination combining ink and wire electrodes.

In this work we have developed an amperometric enzymatic biosensor in a paper-based platform with a mixed electrode configuration: carbon ink for the working electrode (WE) and metal wires (from a low-cost standard electronic connection) for reference (RE) and auxiliary electrodes (AE). A hydrophobic wax-defined paper area was impregnated with diluted carbon ink. Three gold-plated pins of the standard connection are employed, one for connecting the WE and the other two acting as RE and AE. The standard connection works as a clip in order to support the paper in between. As a proof-of-concept, glucose sensing was evaluated. The enzyme cocktail (glucose oxidase, horseradish peroxidase and potassium ferrocyanide as mediator of the electron transfer) was adsorbed on the surface. After drying, glucose solution was added to the paper, on the opposite side of the carbon ink. It wets RE and AE, and flows by capillarity through the paper contacting the carbon WE surface. The reduction current of ferricyanide, product of the enzymatic reaction, is measured chronoamperometrically and correlates to the concentration of glucose. Different parameters related to the bioassay were optimized, adhering the piece of paper onto a conventional screen-printed carbon electrode (SPCE). In this way, the RE and the AE of the commercial card were employed for optimizing the paper-WE. After evaluating the assay system in the hybrid paper-SPCE cell, the three-electrode system consisting of paper-WE, wire-RE and wire-AE, was employed for glucose determination, achieving a linear range between 0.3 and 15mM with good analytical features and being able of quantifying glucose in real food samples.

Comparative electrochemical behaviour of biotin hydrazide and photobiotin. Importance in the development of biosensors.

The cyclic voltammetric behaviour of biotin hydrazide and photobiotin on carbon paste electrodes has been studied. Biotin hydrazide presents an anodic and irreversible process, meanwhile photobiotin presents two, adsorptive in nature. This characteristic makes photobiotin desirable for following the interaction between biotin and streptavidin, being possible to detect a streptavidin concentration of 10(-12) M. The evidence of this reaction has been shown either directly in solution or on the electrode surface. Photobiotin as the molecule portable of analytical information and carbon paste as the solid support could be applied to the development of sensors based on the oxidation of this molecule.

Voltammetric study and determination of buprenorphine in pharmaceuticals.

The oxidation of buprenorphine on a carbon paste electrode has been studied using voltammetric techniques under both semi-infinite linear diffusion and hydrodynamic conditions. By applying a simple electrode pretreatment a good reproducibility of the current signal is obtained (R.S.D. = 0.85%, n = 6 for a 1.0 x 10(-5) M buprenorphine concentration). The limit of detection was found to be 2.0 x 10(-7) M. The voltammetric method developed for the determination of buprenorphine in pharmaceutical preparations was examined for its applicability to liquid and solid preparations.

Flow injection analysis with amperometric detection of naltrexone in pharmaceuticals.

Flow injection analysis (FIA) with amperometric detection using a carbon paste electrode is applied to the determination of naltrexone. The sample solution was injected into the carrier stream of 0.1 M perchloric acid, being determined by oxidation at +1.0 V vs. Ag/AgCl/sat. KCl using a flow rate of 4 ml min-1. A relative standard deviation of 1.5% was calculated for a concentration level of 10(-5) M (n = 17) without carrying out a carbon paste electrode pretreatment. Calibration curves were found to be linear between 2 x 10(-8) and 10(-5) M (almost three orders of magnitude) and the method has a detection limit of 2 x 10(-8) M. A simple and reproducible procedure is proposed for the determination of naltrexone in pharmaceuticals. The results compared favourably with those obtained by an HPLC-UV method.

Comparative voltammetric study of 2,4-dinitrophenol (DNP), albumin and DNP-albumin as an analytical approach to the use of DNP as a universal label in immunoelectrochemical assays.

A comparative electrochemical study of 2,4-dinitrophenol (DNP), albumin and DNP-albumin has been carried out at a hanging mercury drop electrode, in order to use DNP as a universal label in immunoelectrical assays. Several electrochemical techniques have been used. Differential pulse voltammetry has proved to be the most suitable. Wide dynamic linear ranges (more than three orders of magnitude for DNP-albumin) and low detection limits have been achieved (5 x 10(-10)M, 2 x 10(-10)M, 3 x 10(-12)M for DNP, albumin and DNP-albumin, respectively). Good reproducibility has been obtained in all cases (R.S.D. < 2.2%).