Measurement invariance across countries of the Test of Memory Strategies (TMS): A contribution to the cross-national validity study.

Previous literature showed a complex interpretation of recall tasks due to the complex relationship between Executive Functions (EF) and Long Term Memory (M). The Test of Memory Strategies (TMS) could be useful for assessing this issue, because it evaluates EF and M simultaneously. This study aims to explore the validity of the TMS structure, comparing the models proposed by Vaccaro et al. (2022) and evaluating the measurement invariance according to three countries (Italy, Spain, and Portugal) through Confirmatory Factor Analysis (CFA). Four hundred thirty-one healthy subjects (Age mean = 54.84, sd = 20.43; Education mean = 8.85, sd =4.05; M = 177, F = 259) were recruited in three countries (Italy, Spain, and Portugal). Measurement invariance across three country groups was evaluated through Structural Equation modeling. Also, convergent and divergent validity were examined through the correlation between TMS and classical neuropsychological tests. CFA outcomes suggested that the best model was the three-dimensional model, in which list 1 and list2 reflect EF, list 3 reflects a mixed factor of EF and M (EFM) and list4 and list5 reflect M. This result is in line with the theory that TMS decreases EF components progressively. TMS was metric invariant to the country, but scalar invariance was not tenable. Finally, the factor scores of TMS showed convergent validity with the classical neuropsychological tests. The overall results support cross-validation of TMS in the three countries considered.

A 3D-Printed Portable UV and Visible Photoreactor for Water Purification and Disinfection Experiments.

Water scarcity and contamination are urgent issues to be addressed. In this context, different materials, techniques, and devices are being developed to mitigate contemporary and forthcoming water constraints. Photocatalysis-based approaches are suitable strategies to address water contamination by degrading contaminants and eliminating microbes. Photoreactors are usually designed to perform photocatalysis in a scalable and standardised way. Few or none have been developed to combine these characteristics with portability, flexibility, and cost effectiveness. This study reports on designing and producing a portable (490 g), low-cost, and multifunctional photoreactor that includes adjustable radiation intensity and two types of wavelengths (UV-A and visible), including combined agitation in a compact mechanism produced through 3D printing technology. The mechanical, electrical, and optical subsystems were designed and assembled into a robust device. It is shown that it is possible to apply radiations that can reach 65 mW/cm2 and 110 mW/cm2 using the installed visible and UV LEDs and apply mechanical agitation up to 200 rpm, all under a ventilated system. Regarding functionality, the photoreactor proof of concept indicated the ability to degrade ~80% and 30% ciprofloxacin under UV and visible irradiation of TiO2 and Ag/TiO2 nanoparticles. The device also showed the ability to eliminate E. coli bacteria, recurring to radiation set-ups and nanoparticles. Therefore, the originally designed and constructed photoreactor concept was characterised and functionally validated as an exciting and flexible device for lab-scaled or outdoor experiments, assuring standardised and comparable results.

Accuracy of Silicone Impressions and Stone Models Using Two Laboratory Scanners: A 3D Evaluation.

PURPOSE: To evaluate the in vitro accuracy of impressions obtained with two silicone and corresponding stone models using two laboratory scanners. MATERIALS AND METHODS: A master model with synthetic resin teeth with two single-unit crown preparations was created and scanned using a 12-megapixel scanner. Five conventional impressions of the physical model were prepared with different silicone impression systems (Zhermack and Coltene) using the double-mix technique and poured with gypsum. The impressions and stone models obtained were scanned using two extraoral scanning systems (Identica T500, Medit; S600 ARTI, Zirkonzahn). All best-fit superimpositions of the teeth areas were conducted between the master model and the scans of the impressions and models obtained with the two scanners. A P < .05 level was considered significant. RESULTS: The Identica T500 Medit scanner showed an accuracy of 102.34 (89.67, 115.01) µm for Coltene silicone and 79.51 (67.82, 91.21) µm for Zhermack silicone, while the S600 ARTI Zirkonzhan scanner presented 110.79 (98.24, 123.33) µm and 91.91 (81.29, 102.54) µm, respectively, with significant differences between scanners for Zhermack silicone (P = .008) and for the corresponding stone models (P = .002). Zhermack silicone presented overall discrepancies lower than Coltene silicone, with statistically significant differences in both scanners analyzed (P < .001; P = .017). However, the discrepancies found were within clinically acceptable values. With the Zirkonzahn scanner, discrepancies found in the Zhermack impressions were lower than in the corresponding stone models (P < .001). CONCLUSIONS: The direct digitization of silicone impressions with laboratory scanners presented comparable results to conventional techniques with stone models.

Monitoring of species' genetic diversity in Europe varies greatly and overlooks potential climate change impacts.

Genetic monitoring of populations currently attracts interest in the context of the Convention on Biological Diversity but needs long-term planning and investments. However, genetic diversity has been largely neglected in biodiversity monitoring, and when addressed, it is treated separately, detached from other conservation issues, such as habitat alteration due to climate change. We report an accounting of efforts to monitor population genetic diversity in Europe (genetic monitoring effort, GME), the evaluation of which can help guide future capacity building and collaboration towards areas most in need of expanded monitoring. Overlaying GME with areas where the ranges of selected species of conservation interest approach current and future climate niche limits helps identify whether GME coincides with anticipated climate change effects on biodiversity. Our analysis suggests that country area, financial resources and conservation policy influence GME, high values of which only partially match species' joint patterns of limits to suitable climatic conditions. Populations at trailing climatic niche margins probably hold genetic diversity that is important for adaptation to changing climate. Our results illuminate the need in Europe for expanded investment in genetic monitoring across climate gradients occupied by focal species, a need arguably greatest in southeastern European countries. This need could be met in part by expanding the European Union's Birds and Habitats Directives to fully address the conservation and monitoring of genetic diversity.

Proteomics Reveals mRNA Regulation and the Action of Annexins in Thyroid Cancer.

Differentiated thyroid cancer is the most common malignancy of the endocrine system. Although most thyroid nodules are benign, given the high incidence of thyroid nodules in the population, it is important to understand the differences between benign and malignant thyroid cancer and the molecular alterations associated with malignancy to improve detection and signal potential diagnostic, prognostic, and therapeutic targets. Proteomics analysis of benign and malignant human thyroid tissue largely revealed changes indicating modifications in RNA regulation, a common cancer characteristic. In addition, changes in the immune system and cell membrane/endocytic processes were also suggested to be involved. Annexin A1 was considered a potential malignancy biomarker and, similarly to other annexins, it was found to increase in the malignant group. Furthermore, a bioinformatics approach points to the transcription factor Sp1 as being potentially involved in most of the alterations seen in the malignant thyroid nodules.

Smart and Multifunctional Materials Based on Electroactive Poly(vinylidene fluoride): Recent Advances and Opportunities in Sensors, Actuators, Energy, Environmental, and Biomedical Applications.

From scientific and technological points of view, poly(vinylidene fluoride), PVDF, is one of the most exciting polymers due to its overall physicochemical characteristics. This polymer can crystalize into five crystalline phases and can be processed in the form of films, fibers, membranes, and specific microstructures, being the physical properties controllable over a wide range through appropriate chemical modifications. Moreover, PVDF-based materials are characterized by excellent chemical, mechanical, thermal, and radiation resistance, and for their outstanding electroactive properties, including high dielectric, piezoelectric, pyroelectric, and ferroelectric response, being the best among polymer systems and thus noteworthy for an increasing number of technologies. This review summarizes and critically discusses the latest advances in PVDF and its copolymers, composites, and blends, including their main characteristics and processability, together with their tailorability and implementation in areas including sensors, actuators, energy harvesting and storage devices, environmental membranes, microfluidic, tissue engineering, and antimicrobial applications. The main conclusions, challenges and future trends concerning materials and application areas are also presented.

Designing antimicrobial biomembranes via clustering amino-modified cellulose nanocrystals on silk fibroin ß-sheets.

The continuous rising of infections caused by multidrug-resistant pathogens is becoming a global healthcare concern. Developing new bio-based materials with unique chemical and structural features that allow efficient interaction with bacteria is thus important for fighting this phenomenon. To address this issue, we report an antimicrobial biomaterial that results from clustering local facial amphiphilicity from amino-modified cellulose on silk fibroin ß-sheets, by simply blending the two components through casting technology. A simple but effective method for creating a membrane that is antibacterial and non-cytotoxic. Amino-modified cellulose nanocrystals (CNC-NH2) were mixed with proteinaceous silk fibroin (SF) which resulted in a material with improved crystallinity, higher ß-sheet content, and exposed amino-groups at its surface features, proven by Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS), that does not occur when the components are individually assembled. The resulting material possesses important antibacterial activity inducing >3 CFU log10 reduction of Escherichia coli and Staphylococcus epidermidis, while the pristine membranes show no antibacterial effect. The chemical interactions occurring between SF and CNC-NH2 during casting, exposing the amino moieties at the surface of the material, are proposed as the main reason for this antimicrobial activity. Importantly, the membranes are non-cytotoxic, showing their potential to be used as a new bioinspired material with intrinsic antibacterial activity for biomedical applications. Those may include coatings for medical devices for the control of healthcare-associated infections, with no need for including external antimicrobial agents in the material.

Genetic diversity goals and targets have improved, but remain insufficient for clear implementation of the post-2020 global biodiversity framework.

Genetic diversity among and within populations of all species is necessary for people and nature to survive and thrive in a changing world. Over the past three years, commitments for conserving genetic diversity have become more ambitious and specific under the Convention on Biological Diversity's (CBD) draft post-2020 global biodiversity framework (GBF). This Perspective article comments on how goals and targets of the GBF have evolved, the improvements that are still needed, lessons learned from this process, and connections between goals and targets and the actions and reporting that will be needed to maintain, protect, manage and monitor genetic diversity. It is possible and necessary that the GBF strives to maintain genetic diversity within and among populations of all species, to restore genetic connectivity, and to develop national genetic conservation strategies, and to report on these using proposed, feasible indicators.

Peptidomics Unveils Distinct Acetylation Patterns of Histone and Annexin A1 in Differentiated Thyroid Cancer.

Thyroid cancer is a common malignancy of the endocrine system. Nodules are routinely evaluated for malignancy risk by fine needle aspiration biopsy (FNAB), and in cases such as follicular lesions, differential diagnosis between benign and malignant nodules is highly uncertain. Therefore, the discovery of new biomarkers for this disease could be helpful in improving diagnostic accuracy. Thyroid nodule biopsies were subjected to a precipitation step with both the insoluble and supernatant fractions subjected to proteome and peptidome profiling. Proteomic analysis identified annexin A1 as a potential biomarker of thyroid cancer malignancy, with its levels increased in malignant samples. Also upregulated were the acetylated peptides of annexin A1, revealed by the peptidome analysis of the supernatant fraction. In addition, supernatant peptidomic analysis revealed a number of acetylated histone peptides that were significantly elevated in the malignant group, suggesting higher gene transcription activity in malignant tissue. Two of these peptides were found to be robust malignancy predictors, with an area under the receiver operating a characteristic curve (ROC AUC) above 0.95. Thus, this combination of proteomics and peptidomics analyses improved the detection of malignant lesions and also provided new evidence linking thyroid cancer development to heightened transcription activity. This study demonstrates the importance of peptidomic profiling in complementing traditional proteomics approaches.

High Performance of Metallic Thin Films for Resistance Temperature Devices with Antimicrobial Properties.

Titanium-copper alloy films with stoichiometry given by Ti1-xCux were produced by magnetron co-sputtering technique and analyzed in order to explore the suitability of the films to be applied as resistive temperature sensors with antimicrobial properties. For that, the copper (Cu) amount in the films was varied by applying different DC currents to the source during the deposition in order to change the Cu concentration. As a result, the samples showed excellent thermoresistivity linearity and stability for temperatures in the range between room temperature to 110 °C. The sample concentration of Ti0.70Cu0.30 has better characteristics to act as RTD, especially the αTCR of 1990 ×10-6°C-1. The antimicrobial properties of the Ti1-xCux films were analyzed by exposing the films to the bacterias S. aureus and E. coli, and comparing them with bare Ti and Cu films that underwent the same protocol. The Ti1-xCux thin films showed bactericidal effects, by log10 reduction for both bacteria, irrespective of the Cu concentrations. As a test of concept, the selected sample was subjected to 160 h reacting to variations in ambient temperature, presenting results similar to a commercial temperature sensor. Therefore, these Ti1-xCux thin films become excellent antimicrobial candidates to act as temperature sensors in advanced coating systems.

Ionic Liquids as Biocompatible Antibacterial Agents: A Case Study on Structure-Related Bioactivity on Escherichia coli.

The potential of ionic liquids (ILs) to be used as antimicrobial agents for biomedical applications has been hindered by the fact that most of them are cytotoxic toward mammalian cells. Understanding the mechanism of bacterial and mammalian cellular damage of ILs is key to their safety design. In this work, we evaluate the antimicrobial activity and mode of action of several ILs with varying anions and cations toward the clinically relevant Gram-negative Escherichia coli. Langmuir monolayer technique was used to evaluate if the IL's mode of action was related to the bacterial cell membrane interaction for an effective E. coli killing. 1-Decyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide [DMIM][TFSI] and trihexyltetradecyl phosphonium bis(trifluoromethylsulfonyl) imide [P6,6,6,14][TFSI] were surface-active and induced bacterial cell lysis, through a membrane-disruption phenomenon on bacteria, in a mechanism that was clearly related to the long alkyl chains of the cation. 1-Ethyl-3-methylimidazolium hydrogen sulfate [EMIM][HSO4] was highly antimicrobial toward E. coli and found suitable for biological applications since it was harmless to mammalian cells at most of the tested concentrations. The results suggest that the imidazolium cation of the ILs is mostly responsible not only for their antimicrobial activity but also for their cytotoxicity, and the inclusion of different anions may tailor the ILs' biocompatibility without losing the capacity to kill bacteria, as is the case of [EMIM][HSO4]. Importantly, this IL was found to be highly antimicrobial even when incorporated in a polymeric matrix.

Two- and three-dimensional piezoelectric scaffolds for bone tissue engineering.

The incidence of bone disorders worldwide is increasing. For this reason, new and more effective strategies for bone repair are needed. The most common strategy used for cell regeneration relies in biochemical stimulation while biophysical stimulation using mechanical, and electrical cues is a promising, however, still under-investigated field. This work reports on the development of piezoelectric 2D and 3D porous scaffolds for bone tissue regeneration strategies. While the porous scaffolds mimic the bone's structure, the piezoelectric activity of the scaffolds mimics the bone mechano-electric microenvironment. The piezoelectric activity is related to the electroactive ß-phase of poly(vinylidene fluoride) (PVDF) in the scaffolds and was dynamically stimulated by cell culture in a custom-made mechanical bioreactor. These two factors combined provide an effective biomimetic environment for the proliferation of preosteoblasts. The electromechanically-responsive scaffolds are found to promote the enhancement of proliferation rate of MC3T3-E1 osteoblastic cells in about 20 % as well as an improved adhesion and proliferation over the materials, mainly when dynamically stimulated. These results prove that local piezoelectric effect, as the one existing in bone tissue, allows effective cell proliferation, which could be further translated in more efficient strategies for bone tissue regeneration.

Flexible TiCux Thin Films with Dual Antimicrobial and Piezoresistive Characteristics.

The eradication of microorganisms from high traffic surfaces to prevent either viral or bacterial infections represents an urgent need, mainly in the scope of the present pandemic scenario. In this context, this work explores the dual functionality of titanium-copper thin films as pressure elements with antimicrobial properties, aiming for the implementation of touch and sensing capabilities in high traffic surfaces. Copper was employed as the antibacterial agent within a titanium matrix. The film's geometry and deposition parameters were varied in order to optimize antimicrobial and piezoresistive response. A considerable antimicrobial response has been obtained, increasing the copper amount (from 23 to 63 at. %) in the titanium matrix, leading to an outstanding 8 log10 CFU bacterial reduction in the case of Escherichia coli. Moreover, for the same amount of copper, the piezoresistive sensibility of the thin films increases up to a maximum gauge factor of 5.18 ± 0.09, which indicates an adequate electromechanical behavior for sensing applications. Our findings demonstrate the best combined antimicrobial and piezoresistive characteristics for the films with a Cu content of 63 at. %, indicating a potential use of these films for electromechanical sensor applications.

TERT Promoter Mutational Status in the Management of Cutaneous Melanoma: Comparison with Sentinel Lymph Node Biopsy.

BACKGROUND: While BRAF mutations seem important for early melanomagenesis, mutations in the TERT promoter (TERTp) are related to metastasis. Yet, in conventional melanoma management, risk stratification does not depend on molecular biomarkers that can indicate the stage of progression, but rather on clinical, pathological, sentinel lymph node (SLN), and radiologic evaluation. The aim of this work was to evaluate the frequency and prognostic impact of TERTp mutations, comparing their predictive value to those of conventional procedures in melanoma management. METHODS: Mutational analysis of a series of 91 cases was performed. The correlations between TERTp and BRAF mutational status and clinicopathological features were assessed. RESULTS: The mutation rate was 33% for TERTp and 30% for BRAF. There was 68% concordance between primary and metastatic samples for TERTp mutations and 92% for BRAF mutations. TERTp mutations are significantly associated with the presence of BRAF mutations, features of worse prognosis, and a reduced disease-free survival. Also, TERTp mutational status was similar to SLN biopsy as a predictive factor of cutaneous melanoma recurrence and metastasis. CONCLUSIONS: The predictive value of TERTp mutations may be similar to that of SLN biopsy and its integration in the management algorithm of melanoma patients should be considered.

Exploring electroactive microenvironments in polymer-based nanocomposites to sensitize bacterial cells to low-dose embedded silver nanoparticles.

The search for alternative antimicrobial strategies capable of avoiding resistance mechanisms in bacteria are highly needed due to the alarming emergence of antimicrobial resistance. The application of physical stimuli as a mean of sensitizing bacteria for the action of antimicrobials on otherwise resistant bacteria or by allowing the action of low quantity of antimicrobials may be seen as a breakthrough for such purpose. This work proposes the development of antibacterial nanocomposites using the synergy between the electrically active microenvironments, created by a piezoelectric polymer (poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE)), with green-synthesized silver nanoparticles (AgNPs). The electrical microenvironment is generated via mechanical stimulation of piezoelectric PVDF-TrFE/AgNPs films using a lab-made mechanical bioreactor. The generated material's electrical response further translates to bacterial cells, namely Escherichia coli and Staphylococcus epidermidis which in combination with AgNPs and the specific morphological features of the material induce important antibacterial and antibiofilm activity. Both porous and non-porous PVDF composites have shown antibacterial characteristics when stimulated at a mechanical frequency of 4 Hz being the effect boosted when AgNPs were incorporated in the nanocomposite, reducing in more than 80% the S. epidermidis bacterial growth in planktonic and biofilm form. The electroactive environments sensitize the bacteria allowing the action of a low dose of AgNPs (1.69% (w/w)). Importantly, the material did not compromise the viability of mammalian cells, thus being considered biocompatible. The piezoelectric stimulation of PVDF-based polymeric films may represent a breakthrough in the development of antibacterial coatings for devices used at hospital setting, taking advantage on the use of mechanical stimuli (pressure/touch) to exert antibacterial and antibiofilm activity. STATEMENT OF SIGNIFICANCE: The application of physical methods in alternative to the common chemical ones is seen as a breakthrough for avoiding the emergence of antimicrobial resistance. Antimicrobial strategies that take advantage on the capability of bacteria to sense physical stimuli such as mechanical and electrical cues are scarce. Electroactive nanocomposites comprised of poly(vinylidene fluoride-co-trifluoroethylene (PVDF-TrFE) and green-synthesized silver nanoparticles (AgNPs) were developed to obtain material able to inhibit the colonization of microorganisms. By applying a mechanical stimuli to the nanocomposite, which ultimately mimics movements such as walking or touching, an antimicrobial effect is obtained, resulting from the synergy between the electroactive microenvironments created on the surface of the material and the AgNPs. Such environments sensitize the bacteria to low doses of antimicrobials.

Influence of glucose, sucrose, and dextran coatings on the stability and toxicity of silver nanoparticles.

Aqueous colloids, consisting of 15-30 nm-sized silver nanoparticles (Ag NPs), were prepared using the reducing and stabilizing abilities of glucose, sucrose, and dextran. The long-term stability of coated Ag NPs increases from glucose over sucrose to dextran, i.e., with the increase of the molecular weight of carbohydrate molecules. The density functional theory (DFT) calculations of the partial atomic (Mulliken) charges and adsorption energies are applied to explain the enhanced stability of coated Ag NPs. All coated Ag NPs have a significantly broader concentration range of nontoxic behavior toward pre-osteoblast cells than bare Ag NPs prepared using sodium borohydride. The carbohydrate-coated Ag NPs display the same level of toxic ability against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria as bare Ag NPs. The differences in toxicity mechanism of the coated and bare Ag NPs are a consequence of the absence and presence of co-occurring Ag+ ions in examined dispersion, respectively.

The Thermal Influence of Oral Rehabilitation on the Cranio-Cervico-Mandibular Complex: A Thermographic Analysis.

PURPOSE: Assess the thermal effect of prosthodontic treatment on the cranio-cervico-mandibular complex using infrared thermography. METHODS: The treatment group was composed of adults of both sexes who underwent a prosthodontic treatment in which at least posterior occlusal contacts were added and/or the vertical dimension of occlusion was reestablished. The control group (CG) was constituted of adult subjects of both sexes, with no more than a single missing posterior tooth, excluding third molars. Thermograms were taken of the treatment group with a Flir i7 IR camera both before oral rehabilitation (TGB; n = 33) and two months after treatment was concluded (TGA; n = 19). CG (n = 33) had only one occasion for data acquisition. RESULTS: Statistically significant differences were found when the thermal difference (ΔT) and the health status of the orbicularis oris muscle were compared between the TGB and the TGA groups (p = 0.020 and p = 0.003, respectively). By comparing the health status of the masseter muscle between the CG and TGB, statistically significant differences were also observed (p = 0.030). CONCLUSION: A prosthodontic treatment appears to have a minimum or null effect on the ΔT and/or on the health status of the TMJ and the temporal muscle. In contrast, orbicularis oris muscles exhibited significant thermal variations.

Effects of Three Semen Extenders, Breeding Season Month and Freezing-Thawing Cycle on Spermatozoa Preservation of Portuguese Merino Sheep.

This study aimed to evaluate and compare the effect of three semen extenders (S-EXT) on 22 spermatozoa (SPZ) parameters (subjective and computer-assisted sperm analysis evaluations), before and after semen cryopreservation throughout different months of the breeding season in the Portuguese Merino breed. According to the multivariable model, the SPZ viability (alive %), kinetics subjective individual motility, total motility, total progressive motility and its subpopulations, and beat cross frequency) were higher in the egg yolk-based S-EXT improved by Estação Zootécnica National (Portugal) than in Ovixcell® or Andromed® extenders. All the differences were only observed in thawed semen, except for total motility and total progressive motility, in which Ovixcell® also showed the poorest results on fresh semen. An interaction effect between S-EXT and semen processing was observed on 72.3% (17/22) of the evaluated parameters, evidencing a variable cryoprotective action between S-EXT. The SPZ viability was poorer in the onset of the breeding season (end of April/early May) than in the previous middle breeding season (November/early December), suggesting the influence of a short anoestrous season on ejaculate quality, even though the volume and SPZ concentration of the ejaculates remained stable throughout the experiment. Additionally, S-EXT x semen processing x month interaction effect on 59.1% (13/22) of the evaluated parameters evidenced the importance of SPZ time collection in a natural environment to cryopreserve ram's semen. We concluded that, overall, the egg yolk-based S-EXT provided a greater value to the cryopreservation of Merino rams´ semen. Nevertheless, the causes of the interaction effect between S-EXT, semen processing and/or month on several SPZ parameters should be addressed, including SPZ molecular research in new studies, in order to improve egg yolk-based as well as in egg yolk-free-based S-EXT.

Ionic Liquid-Based Materials for Biomedical Applications.

Ionic liquids (ILs) have been extensively explored and implemented in different areas, ranging from sensors and actuators to the biomedical field. The increasing attention devoted to ILs centers on their unique properties and possible combination of different cations and anions, allowing the development of materials with specific functionalities and requirements for applications. Particularly for biomedical applications, ILs have been used for biomaterials preparation, improving dissolution and processability, and have been combined with natural and synthetic polymer matrixes to develop IL-polymer hybrid materials to be employed in different fields of the biomedical area. This review focus on recent advances concerning the role of ILs in the development of biomaterials and their combination with natural and synthetic polymers for different biomedical areas, including drug delivery, cancer therapy, tissue engineering, antimicrobial and antifungal agents, and biosensing.

Global Commitments to Conserving and Monitoring Genetic Diversity Are Now Necessary and Feasible.

Global conservation policy and action have largely neglected protecting and monitoring genetic diversity-one of the three main pillars of biodiversity. Genetic diversity (diversity within species) underlies species' adaptation and survival, ecosystem resilience, and societal innovation. The low priority given to genetic diversity has largely been due to knowledge gaps in key areas, including the importance of genetic diversity and the trends in genetic diversity change; the perceived high expense and low availability and the scattered nature of genetic data; and complicated concepts and information that are inaccessible to policymakers. However, numerous recent advances in knowledge, technology, databases, practice, and capacity have now set the stage for better integration of genetic diversity in policy instruments and conservation efforts. We review these developments and explore how they can support improved consideration of genetic diversity in global conservation policy commitments and enable countries to monitor, report on, and take action to maintain or restore genetic diversity.