Antinociceptive effect of cyclic and linear diterpenoids as new atypical agonists of κ-opioid receptors obtained from four species of the Baccharis genus, and vehiculated in nanometric niosomes.

New natural analgesic compounds that act in KORs are important alternatives for potential therapeutical use in medicine. In this work, we report and compare here the antinociceptive activity displayed by cyclic and linear diterpenes, obtained from the genus Baccharis. The antinociceptive activities determined were relatively strong, in comparison whit morphine. The antinociceptive mechanism of action was made through naloxone administration (a non-selective antagonist of opioid receptors). The more active compounds were vehiculized successfully in niosomes at nanometric scale. The observed antinociceptive activity for Bartemidiolide oxide (BARTO), obtain from Baccharis artemisioides, was greater than Flabeloic acid dimer (DACD), the first compound isolated from Baccharis flabellata that was reported possessing antinociceptive effects. We also conducted docking calculations and molecular dynamics simulations, which suggested that the newly identified diterpenes might share the molecular action mechanism reported for Salvinorin A (SalA). Molecular simulations have allowed us to appreciate some subtle differences between molecular interactions of these ligands stabilizing their respective complexes; such information might be useful for designing and searching for new inhibitors of KORs.

Preservation of the Antioxidant Capacity of Resveratrol via Encapsulation in Niosomes.

Resveratrol (RSV) is a natural polyphenol which produces several benefits to human health, being the trans-isomer the most bioactive. However, its systemic absorption is limited due to its low water solubility, that reduces the oral bioavailability, and its chemical instability (owing to the trans-cis RSV isomer conversion upon light irradiation). Thus, encapsulation of this bioactive compound is required to protect it from destructive environmental conditions. Here, trans-RSV was encapsulated in food grade nanovesicles formed by Tween 80 and Span 80, with or without the addition of dodecanol (Dod) as membrane stabilizer. The size and shape of niosomes were evaluated by microscopy (TEM) and light scattering. RSV was successfully encapsulated in the vesicular systems (49-57%). The effect of Dod in the membrane bilayer was evaluated on the RSV in vitro release experiments under simulated gastrointestinal conditions. The total antioxidant capacity of the encapsulated polyphenol was measured using radicals' assays (DPPH and ABTS). The niosomes were able to maintain almost the total antioxidant capacity of encapsulated RSV, also preserved the ~85% of trans-RSV, thus offering considerable protection against high energy irradiation. These results make these systems suitable for different applications, particularly for photosensitive compounds.

Effect of drug molecular weight on niosomes size and encapsulation efficiency.

Encapsulation into nanocarriers, such as niosomes, is a promising way to protect them from degradation, and allow controll and target delivery of bioactive compounds. For biotechnological applications, a tight control of particle size with acceptable encapsulation efficiencies (EE) is a technological challenge, especially for hydrophilic compounds due to its capability to diffuse across biological barriers. Niosomes formulated with mixture of surfactants represent promising nanocarriers due to the advantages of non-ionic surfactants, such as low cost, versatility and enhanced physico-chemical properties. In this work, the effect of both, composition of the hydrating solution and molecular weight of the loaded compound, on the particle size and EE of niosomes prepared by using the thin film hydration method was studied. Particularly, mili-Q water, glycerol solution and PEG-400 solution were tested for niosomes formulated with Span®80-Tween®80 with/without dodecanol as membrane stabilizer. It was found that particle size highly depends on hydration media composition and an interaction with compound MW could exist. Larger vesicles results in an increase in EE, which could be purely related with physical aspects such as vesicle loading volume capacity. The effect of hydration solution composition could be related with their ability to change the bilayer packing and physical properties, as observed by differential scanning calorimetry. Finally, it was possible to compare the suitability of dialysis and gel filtration as purification methods, demonstrating that gel filtration is not an adequate purification method when viscous solutions are used, since they could affect the particle vesicles retention and hence EE measurements would be misrepresentative.

Complex systems that incorporate cyclodextrins to get materials for some specific applications.

Cyclodextrins (CDs) are a family of biodegradable cyclic hydrocarbons composed of α-(1,4) linked glucopyranose subunits, the more common containing 6, 7 or 8 glucose units are named α, ß and γ-cyclodextrins respectively. Since the discovery of CDs, they have attracted interest among scientists and the first studies were about the properties of the native compounds and in particular their use as catalysts of organic reactions. Characteristics features of different types of cyclodextrins stimulated investigation in different areas of research, due to its non-toxic and non-inmunogenic properties and also to the development of an improved industrial production. In this way, many materials with important properties have been developed. This mini-review will focus on chemical systems that use cyclodextrins, whatever linked covalently or mediated by the non covalent interactions, to build complex systems developed mainly during the last five years.

Recent Strategies in Resveratrol Delivery Systems.

Resveratrol, a natural polyphenolic stilbenoid widely found in grapes and wines, displays beneficial properties such as cardio-protective, antioxidant and anti-inflammatory activities. Trans-resveratrol (RSV) is the most bioactive and more abundant stereoisomer found in nature. Despite the positive properties of RSV, there are various factors that limit its effectiveness, including low aqueous solubility, low oral bioavailability and chemical instability. During the last years, an increasing number of strategies such as nano and micro encapsulation have been developed in order to overcome these limitations and enhance the use of RSV in nutritional and pharmaceutical applications. This Review summarizes the advances and main properties of several RSV carriers and delivery systems reported during the last 5 years.

Niosomes encapsulated in biohydrogels for tunable delivery of phytoalexin resveratrol.

A series of biohydrogels based on mixtures of kappa-carrageenan (κ-carrageenan, κ-C) and gelatin were evaluated as potential soft delivery vehicles for the encapsulation and subsequent release of non-ionic surfactant vesicles (niosomes) loaded with resveratrol (RSV). The niosomes were prepared using a mixture of amphiphilic lipids Tween 80 and Span 80 in water. The results showed that RSV-niosomes did not significantly affect the hydrogelation properties of the biopolymer mixture. Moreover, in vitro drug release experiments from biohydrogels containing RSV-niosomes were successfully carried out under simulated gastrointestinal conditions. The RSV-niosomal liberation profiles from hydrogels were fitted using first order kinetics, Higuchi, Korsmeyer-Peppas and Weibull drug release models, showing the prevalence of diffusion mechanisms in each case. In addition, the RSV release was easily tuned by adjusting the total concentration of κ-C : gelatin. Interestingly, the niosomal-hydrogel system was also found to prevent the trans-to-cis photoisomerization of RSV.

Cyclodextrin modified niosomes to encapsulate hydrophilic compounds.

Niosomes were prepared from equimolar mixtures of two non-ionic surfactants, Span 80 and Tween 80. The capability of the vesicular systems was studied through the encapsulation of two azo dyes as molecular probes of different hydrophobicity (methyl orange (MO) and methyl yellow (MY)). To improve the efficiency of the niosomes to encapsulate the dyes, we employed an additional modification of the vesicular system, adding ß-cyclodextrin (ß-CD) or a modified amphiphilic ß-CD (Mod-ß-CD) to the niosomes. Neither the inclusion of dyes nor the incorporation of ß-CD to the niosomes produces considerable modifications in size and morphology of the vesicles. However, in the presence of Mod-ß-CD the niosomes became smaller, probably due to the anchoring of the cyclodextrin at the surface of vesicles through the hydrophobic chain, altering the curvature of the outer monolayer and reducing the surface charge of the interphase. The entrapment efficiency (EE) for MY was higher than that for MO in niosomes without cyclodextrin, however, the content of MO in the presence of ß-CD increased considerably. Besides, the release of this dye under the same conditions was faster and reached 70% in 24 hours whereas in the absence of the macrocycle, the release was 15%, in the same time. UV-visible spectrophotometry and induced circular dichroism analysis allowed it to be established that MO is complexed with cyclodextrins inside vesicles, whereas MY interacts mainly with the niosome bilayer instead of with CD. Besides, the cavity of cyclodextrins is probably located in the interphase and preferably in the polar region of niosomes.

Synergism in the desorption of polycyclic aromatic hydrocarbons from soil models by mixed surfactant solutions.

This study investigates the effect of a mixed surfactant system on the desorption of polycyclic aromatic hydrocarbons (PAHs) from soil model systems. The interaction of a non-ionic surfactant, Tween 80, and an anionic one, sodium laurate, forming mixed micelles, produces several beneficial effects, including reduction of adsorption onto solid of the non-ionic surfactant, decrease in the precipitation of the fatty acid salt, and synergism to solubilize PAHs from solids compared with individual surfactants.

Supramolecular assemblies obtained by mixing different cyclodextrins and AOT or BHDC reverse micelles.

In this contribution we show the effect of the surfactant polar head and the external solvent on the incorporation of different cyclodextrins (CDs) {α-CD, ß-CD, γ-CD, decenylsuccinyl-ß-CD (Mod-ß-CD), and hydroxypropyl-ß-CD (hp-ß-CD)} in different reverse micelles (RMs) {benzene/sodium 1,4-bis(2-ethylhexyl) sulfosuccinate(AOT)/water, and benzene/benzyl-n-hexadecyldimethylammonium chloride (BHDC)/water} and compare them with previous results obtained in n-heptane/AOT/water RMs. To investigate the different systems, we have used UV-vis spectrophotometry, induced circular dichroism spectroscopy (ICD), and the achiral molecular probe methyl orange (MO). The results show dramatic differences changing the external solvent and the surfactant, which are explained by considering the differences in the RMs interface composition, the water-surfactant interaction, and the CDs' location in the different media investigated. None of the CDs were incorporated into the benzene/AOT/water RMs at any [H2O]/[surfactant] ratio studied (W0) whereas it was previously shown that Mod-ß-CD and hp-ß-CD could be included in n-heptane/AOT/water RMs. However, all of the CDs are incorporated in benzene/BHDC/water RMs at W0 > 10 and hp-ß-CD is dissolved even at W0 = 0. Different from what was found in n-heptane/AOT RMs, in BHDC RMs MO showed ICD signals with two different CDs: Mod-ß-CD and hp-ß-CD. The results are explained by considering the known difference in the interfacial water structure for AOT and BHDC RMs and the electron-rich region on the secondary hydroxyl (wider side of the CDs), which helps to solubilize all CDs in BHDC. This study shows that chiral cyclodextrin could be available for a guest in an organic medium such as the RMs. Therefore we have created a potentially powerful nanoreactor with two different confined regions in the same aggregate: the polar core of the RMs and the chiral hydrophobic cavity of cyclodextrin.

Characterization of the hydrochlorothiazide: ß-cyclodextrin inclusion complex. Experimental and theoretical methods.

Hydrochlorothiazide (HCT) is one of the most commonly prescribed antihypertensive drugs. In an attempt to gain an insight into the physicochemical and molecular aspects controlling the complex architecture of native ß-cyclodextrin (ß-CD) with HCT, we performed multiple-temperature-pH isothermal titration calorimetric measurements of the HCT:ß-CD system, together with proton nuclear magnetic resonance spectroscopy ((1)H NMR), phase solubility analysis, and molecular modeling methods. The A(L)-type diagrams, obtained at different pH values and temperatures, suggested the formation of soluble 1:1 inclusion complexes of ß-CD with HCT. The corresponding stability constants (K(1:1)) were determined by phase solubility studies and compared with those obtained by ITC, with good agreement between these two techniques being found. The three-dimensional array of the complex was studied by (1)H NMR and molecular modeling methods. Both techniques confirmed the formation of the inclusion complex, with good agreement between the experimental and theoretical techniques regarding the HCT binding mode to ß-CD. Also, the forces involved in the association process were determined, both from the thermodynamic parameters obtained by ITC (association enthalpy, binding constant, Gibbs free energy, and entropy) and from energetic decomposition analyses derived from computational methods. We concluded that the formation of the HCT:ß-CD complex was enthalpy driven, with the inclusion mode of HCT being highly dependent on its ionization state. In all cases, sustained hydrogen bond interactions with hydroxyl groups of ß-CD were identified, with the solvation energy limiting the affinity. Regarding the pH and temperature dependence, lower affinity constants were found at higher HCT ionization states and temperatures.

Inhibited phenol ionization in reverse micelles: confinement effect at the nanometer scale.

We found that the absorption spectra of 2-acetylphenol (2-HAP), 4-acetylphenol (4-HAP), and p-nitrophenol (p-NPh) in water/sodium 1,4-bis(2-ethylhexyl)sulfosuccinate (AOT)/n-heptane reverse micelles (RMs) at various W(0) (W(0) = [H(2)O]/[surfactant]) values studied changed with time if (-)OH ions were present in the RM water pool. There is an evolution of ionized phenol (phenolate) bands to nonionized phenol absorption bands with time and this process is faster at low W(0) values and with phenols with higher bulk water pK(a) values. That is, in bulk water and at the hydroxide anion concentration used, only phenolate species are observed, whereas in AOT RMs at this fixed hydroxide anion concentration, ionized phenols convert into nonionized phenol species over time. Furthermore, we demonstrate that, independent of the (-)OH concentration used to prepare the AOT RMs, the nonionized phenols are the more stable species in the RM media. We explain our results by considering that strong hydrogen-bonding interactions between phenols and the AOT polar head groups result in the existence of only nonionized phenols at the AOT RM interface. The situation is quite different when the phenols are dissolved in cationic benzyl-n-hexadecyldimethylammonium chloride RMs. Therein, only phenolates species are present at the (-)OH concentrations used. The results clearly demonstrate that the classical definition of pH does not apply in a confined environment, such as in the interior of RMs and challenge the general idea that pH can be determined inside RMs.

Different behaviours in the solubilization of polycyclic aromatic hydrocarbons in water induced by mixed surfactant solutions.

Water solubility of polycyclic aromatic hydrocarbons (PAHs), viz, naphthalene and phenanthrene, in micellar solutions at 25°C was investigated, using two series of different binary mixtures of anionic and nonionic surfactants. Tween 80 and Brij-35 were used as nonionic surfactants whereas fatty acids or amphiphilic cyclodextrins (Mod-ß-CD) synthesized in our laboratory were used as anionic ones. Solubilization capacity has been quantified in terms of the molar solubilization ratio and the micelle-water partition coefficient, using UV-visible spectrophotometry. Anionic surfactants exhibited less solubilization capacity than nonionics. The mixtures between Tween 80 and Mod-ß-CD did not show synergism to increase the solubilization of PAHs. On the other hand, the mixtures formed by Tween 80 and fatty acids at all mole fractions studied produced higher enhancements of the solubility of naphthalene than the individual surfactants. The critical micellar concentration of the mixtures of Tween 80/sodium laurate was determined by surface tension measurements and spectrofluorimetry using pyrene as probe. The system is characterized by a negative interaction parameter (ß) indicating attractive interactions between both surfactants in the range of the compositions studied.

Aggregation behavior of Brij-35/perfluorononanoic acid mixtures.

The mixed system of a nonionic hydrocarbon surfactant, polyoxyethylene (23) lauryl ether (Brij-35), and a perfluorinated surfactant, perfluorononanoic acid, was investigated by a combination of methods. The critical micelle concentrations (cmc's) have been determined over a wide range of sample compositions by fluorescence and UV-visible spectrophotometry using pyrene and N-(4-nitrophenyl) perfluorononanamide, respectively, as molecular probes. The values of the cmc's obtained were considerably different with the two techniques employed. Measurements of the (19)F nuclear magnetic resonance chemical shift of the same mixtures showed two breaks in the plots of Δδ(f) versus molar fraction of the perfluorinated surfactant. Conductivity and surface tension measurements also showed two breaks. The behavior is attributed to the formation of mixed micelles that change their composition when the fraction of the fluorinated compound increases and some segregation of the fluorinated compound takes place at a high total surfactant concentration.

Investigation of the inclusion of the herbicide metobromuron in native cyclodextrins by powder X-ray diffraction and isothermal titration calorimetry.

We report the formation of inclusion complexes between the phenylurea herbicide metobromuron [3-(p-bromophenyl)-1-methoxy-1-methylurea] and beta- and gamma-cyclodextrin in the solid state. Formation of crystalline inclusion complexes by the kneading method was confirmed by powder X-ray diffraction and further structural characterization using the principles of isostructurality followed. In addition, DeltaH degrees , DeltaS degrees , DeltaG degrees and the association constants (K) at 298K were determined for complex formation in solution using isothermal titration calorimetry. The magnitudes of K for the formation of 1:1 complexes between metobromuron and alpha-, beta- and gamma-CD were estimated as 598, 310 and 114, respectively.

Synthesis and characterization of an amphiphilic cyclodextrin, a micelle with two recognition sites.

A cyclodextrin derivative (Mod-CD) was synthesized through the monoesterification of beta-cyclodextrin (beta-CD) with 3-((E)-dec-2-enyl)-dihydrofuran-2,5-dione. The compound is an interesting surfactant that can form large aggregates not only through the interaction of the hydrophobic tails as in common amphiphilic compounds but also through the inclusion of the alkenyl chain into the cavity of another Mod-CD molecule. The self-inclusion of the chain in the cavity of cyclodextrin as well as the intermolecular inclusion was demonstrated by 1H NMR measurements that were able to detect methyl groups in three different environments. Besides, in the aggregates of Mod-CD, the cavity is available to interact with external guests such as phenolphthalein, 1-amino adamantane, and Prodan. Phenolphthalein has the same binding constant with Mod-CD and beta-CD, but the equilibrium constant for the interaction with Prodan is about 2 times larger for Mod-CD than for beta-CD. The latter result is attributed to the fact that this probe interacts with the micelle in two binding sites: the cavity of the cyclodextrin and the apolar heart of the micelle as evidenced by the spectrofluorimetric behavior of Prodan in solutions containing different concentrations of Mod-CD.

On the possibility that cyclodextrins' chiral cavities can be available on AOT n-heptane reverse micelles. A UV-visible and induced circular dichroism study.

The formation of reverse micelles (RMs) of sodium 1,4-bis(2-ethylhexyl)sulfosuccinate (AOT) in n-heptane including two different beta-cyclodextrin (beta-CD) derivatives (hydroxypropyl-beta-CD, hp-beta-CD, and decenyl succinyl-beta-CD, Mod-beta-CD) is reported. Both cyclodextrins can be incorporated into AOT RMs in different zones within the aggregate, while beta-CD cannot. Using UV-vis and induced circular dichroism (ICD) spectroscopy and different achiral molecular probes (some azo dyes, p-nitroaniline and ferrocene), it was possible to determine that Mod-beta-CD is located with its cavity at the oil side of the AOT RM interface, while for hp-beta-CD the cavity is inside the RM water pool. Among the molecular probes used, methyl orange (MO) was the only one which gave the ICD signal when dissolved in the AOT RMs with hp-beta-CD, so a detailed study of MO behavior in homogeneous media was also performed to compare with the microheterogeneous media. The solvatochromic behavior of the dye depends not only on the polarity of the media but also on other specific solvent properties. A Kamlet-Taft analysis shows that the MO absorption spectrum shifts to longer wavelength with an increase in the solvent polarity-polarizability (pi*) and the hydrogen donor ability (alpha) of the medium. MO appears to be almost 3 times more sensitive to the pi* parameter than to the alpha parameter. In addition, from the MO absorption spectral changes with the hp-beta-CD concentration, the association equilibrium constants in pure water (K11W) and inside the RMs (K11RM) were computed. The results show that K11W is almost 10 times larger than the value inside the RMs. The latter can be explained considering that MO resides anchored to the RM interface through hydrogen bond interaction with the hydration bound water. This study shows for the first time that the cyclodextrin chiral cavity is available for a guest in an organic medium such as the RMs; therefore, we have created a potentially powerful nanoreactor with two different confined regions in the same aggregate: the polar core of the RMs and the chiral hydrophobic cavity of cyclodextrin.

Competition between aggregation and hydrolysis in the reaction of arylperfluorooctanoates in micellar solutions.

The rate of hydrolysis of phenyl and p-nitrophenyl perfluorooctanoate (2a and 2b) was measured in water and in the presence of different cationic (dodecyltrimethylammonium chloride, dodecyltrimethylammonium bromide, cetyltrimethylammonium bromide), anionic (sodium dodecyl sulfate (SDS) and perfluorooctanoate (PFO)) and neutral (Brij-35) surfactants. In water solution, the formation of phenol from 2a and p-nitro phenol from 2b takes place through two kinetic processes, both of which are much slower than the expected rate of hydrolysis for the monomeric compounds in water. The two kinetic processes are attributed to a coupling of the rates of hydrolysis and aggregation of the substrates. In the presence of charged surfactants at concentrations below the respective critical micellar concentration (cmc), two relaxation times are also observed. These are of the same order of magnitude as the substrates alone in the case of SDS, but faster for the cationic surfactants. At some concentration above the cmc, all the surfactants, except for PFO, showed a clean pseudo-first-order behavior attributed to the hydrolysis of the substrate incorporated into the micellar phase. In cationic micelles, the rates for 2a are slower and those for 2b are faster than the value expected for the monomer in water. The difference in behavior is attributed to the location of the substrates in the micellar phase and to the charge distribution in the transition state of the reactions. It is shown that the reactions in the micellar phase are catalyzed by the buffer PO4H(2-)/PO4H2(-). The reactions in SDS micelles are faster than those in water but slower than the estimated value for the monomer in water. The rate of the reactions in the presence of nonionic surfactant has values between those in cationic and anionic surfactants, that is, the rates are k(cationic) > k(nonionic) > k(anionic.) The behavior of 2a and 2b in water and in micellar solutions indicates that the substrates form aggregates in water at a rate that competes with the rate of hydrolysis.

Changing mechanisms in the beta-cyclodextrin-mediated hydrolysis of phenyl esters of perfluoroalkanoic acids.

The rate of hydrolysis of esters CF(3)(CF(2))(n)COOPh (1 (n = 1), 2 (n = 2), and 3 (n = 6)) was measured at pH 6.00 and at pH higher than 9.00 in the presence of beta-cyclodextrin (beta-CD). For compounds 1 and 2 the reaction rate decreases as the beta-CD concentration increases, and they show saturation effects at all pH. It is suggested that the substrate forms an inclusion complex with cyclodextrin. Analysis of the rate data allows calculation of the association equilibrium constant, K(CD), the rate constant for the reaction of the included compound, k(c), and K(TS) which is the hypothetical association equilibrium constant for the transition state of the cyclodextrin-mediated reaction. The dependence of log K(CD) and log K(TS) with the number of atoms in the chain is different. We suggest that the reactions of 1 and 2 take place with the perfluorinated alkyl chain included in the cavity, whereas the transition state for the reaction of phenyl trifluoroacetate involves a complex with the aryl ring inside the cavity. At low pH the inhibition comes from the protection of the carbonyl group toward nucleophilic attack by water. In basic pH the reaction of HO(-) as an external nucleophile is also inhibited. The cyclodextrin-mediated reaction involves the ionized OH group at the rim of the cyclodextrin cavity with poor efficiency due to an unfavorable orientation of the substrate in the complex. On the other hand, the reaction of compound 3 is strongly accelerated by cyclodextrin because the association of the substrate with cyclodextrin competes with the monomer-aggregate equilibrium and at high enough cyclodextrin concentration the main species present in solution is the complex between 3 and cyclodextrin.