ABSTRACT
We report the high-efficiency operation of a 3.05 µm dysprosium-doped fluoroindate glass fiber laser that is in-band pumped at 2.83 µm using an erbium-doped fluorozirconate glass fiber laser. The demonstrated slope efficiency of the free-running laser of 82% represents approximately 90% of the Stokes efficiency limit; a maximum output power of 0.36 W, the highest for a fluoroindate glass fiber laser, was recorded. Narrow-linewidth wavelength stabilization at 3.2 µm was achieved by utilizing a first-reported, to the best of our knowledge, high-reflectivity fiber Bragg grating inscribed in the Dy3+-doped fluoroindate glass. These results lay the foundation for future power-scaling of mid-infrared fiber lasers using fluoroindate glass.
ABSTRACT
Zirconium fluoride (ZBLAN) glass, the standard material used in fiber-based mid-infrared photonics, has been re-designed to enable the fabrication of high index-contrast low-loss waveguides via femtosecond laser direct writing. We demonstrate that in contrast to pure ZBLAN, a positive index change of close to 10-2 can be induced in hybrid zirconium/hafnium (Z/HBLAN) glasses during ultrafast laser inscription and show that this can be explained by an electron cloud distortion effect that is driven by the existence of two glass formers with contrasting polarizability. High numerical aperture (NA) type-I waveguides that support a well confined 3.1 µm wavelength mode with a mode-field diameter (MFD) as small as 12 µm have successfully been fabricated. These findings open the door for the fabrication of mid-infrared integrated photonic devices that can readily be pigtailed to existing ZBLAN fibers.
ABSTRACT
The formation of femtosecond laser direct-written waveguides in gallium lanthanum sulfide (GLS) chalcogenide glass with a peak index contrast of Δnmax=0.023 and an average positive refractive index change of Δnwaveguide=0.0049 is explained for the first time, to the best of our knowledge. Evidence of structural change and ion migration is presented using Raman spectroscopy and electron probe microanalysis (EPMA), respectively. Raman microscopy reveals a frequency shift and a change in full-width at half maximum variation of the symmetric vibration of the GaS4 tetrahedra. The boson band is successfully used to identify and understand the material densification profile in a high refractive index glass waveguide. EPMA provides evidence of ion migration due to sulfur, where the observation of an anion (S2-) migration causing material modification is reported for the first time. These results will enable optimization of future mid-infrared and nonlinear integrated optical devices in GLS glass based on femtosecond laser written waveguides.
ABSTRACT
We report on a room-temperature Kerr-lens mode-locked Cr:ZnSe femtosecond laser operating at around 2.4 µm emission wavelength. Self-starting nearly transform-limited pulse trains with a minimum duration of 47 fs, corresponding to six optical cycles, and average output power of 0.25 W are obtained with repetition frequencies in the range from 140 to 300 MHz. The femtosecond pulse train is characterized by high-spectral purity and low time jitter.
ABSTRACT
We propose an all-laser processing approach allowing controlled growth of organic-inorganic superlattice structures of rare-earth ion doped tellurium-oxide-based glass and optically transparent polydimethyl siloxane (PDMS) polymer; the purpose of which is to illustrate the structural and thermal compatibility of chemically dissimilar materials at the nanometer scale. Superlattice films with interlayer thicknesses as low as 2 nm were grown using pulsed laser deposition (PLD) at low temperatures (100 °C). Planar waveguides were successfully patterned by femtosecond-laser micro-machining for light propagation and efficient Er(3+)-ion amplified spontaneous emission (ASE). The proposed approach to achieve polymer-glass integration will allow the fabrication of efficient and durable polymer optical amplifiers and lossless photonic devices. The all-laser processing approach, discussed further in this paper, permits the growth of films of a multitude of chemically complex and dissimilar materials for a range of optical, thermal, mechanical and biological functions, which otherwise are impossible to integrate via conventional materials processing techniques.
