Quantitative morphology of femtosecond laser-written point-by-point optical fiber Bragg gratings.

We investigate the morphology of femtosecond laser, single pulse-inscribed, point-by-point (PbP) fiber Bragg gratings. Direct measurement of a PbP grating's refractive index profile was carried out with micro-reflectivity analysis. PbP gratings were imaged at sub-micrometer scale with scanning electron microscopy, Raman and photoluminescence studies were performed to probe the structural and electronic changes. Comparison of results from different characterisation techniques suggests that the creation of an increased refractive index region around the micro-void is due to contributions from both densification and the formation of highly polarizable non-bridging oxygen bonds.

Femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss at wavelengths beyond 4 µm.

We report on the fabrication of, to the best of our knowledge, the first highly reflective fiber Bragg gratings for the 4 µm wavelength range. A second-order grating with a coupling coefficient (κ) of 230m-1, losses <0.25dB/cm, and a bandwidth of approximately 3 nm was inscribed into the core of a passive indium fluoride (InF3) fiber using a femtosecond (fs) laser. Thermal annealing of this grating at a temperature of 150°C for 90 min resulted in the enhancement of κ to 275m-1. Further, we show that InF3 fibers respond very differently to irradiation with fs laser pulses as compared to ZBLAN fibers and that this difference manifests itself in a significantly larger process window for inscription and in the formation of a more complex refractive index profile that is believed to be caused by the larger nonlinearity of InF3. This Letter paves the way to the development of new wavelength stabilized all-fiber mid-infrared lasers beyond 4 µm.

Optimized laser-written ZBLAN fiber Bragg gratings with high reflectivity and low loss.

We report the direct femtosecond laser inscription of type-I fiber Bragg gratings (FBGs) into the core of soft-glass ZBLAN fibers. We investigate and compare various fabrication methods such as single pass (line by line), double pass, and stacking (plane by plane) to create the highest reflectivity FBGs (99.98%) for mid-infrared (mid-IR) applications. In addition, we experimentally demonstrate how the parameters that influence the coupling coefficient, i.e., refractive index modulation and overlap factor, can be controlled in these gratings to specifically tailor the FBG properties. The performance of the direct-written type-I gratings after 6 h of annealing is further analyzed, and the reflectivity increases by approximately 10 dB. To the best of our knowledge, this is the first demonstration of temperature-stable mid-IR FBGs with highest coupling coefficient (464 m-1) and lowest loss (<0.5 dB/cm) without the use of an expensive phase mask.

Fiber-format dual-comb coherent Raman spectrometer.

We demonstrate a fiber-format system for dual-comb coherent anti-Stokes Raman scattering spectroscopy. The system is based on two ytterbium fiber (Yb) femtosecond lasers at repetition frequencies of 94 MHz, a Yb amplifier, and a photonic crystal fiber for spectral broadening and generation of pulses with a central wavelength of 1040 nm and durations in the sub-20-fs regime. We observed Raman spectra of acetonitrile and ethyl acetate with spectral coverage from 100 to 1300 cm-1, resolution of 8 cm-1, and a signal-to-noise ratio of around 100, when averaging over 10 acquisitions. The design is suitable for implementing portable dual-comb coherent Raman spectrometers.

Diamond photonics platform enabled by femtosecond laser writing.

Diamond is a promising platform for sensing and quantum processing owing to the remarkable properties of the nitrogen-vacancy (NV) impurity. The electrons of the NV center, largely localized at the vacancy site, combine to form a spin triplet, which can be polarized with 532 nm laser light, even at room temperature. The NV's states are isolated from environmental perturbations making their spin coherence comparable to trapped ions. An important breakthrough would be in connecting, using waveguides, multiple diamond NVs together optically. However, still lacking is an efficient photonic fabrication method for diamond akin to the photolithographic methods that have revolutionized silicon photonics. Here, we report the first demonstration of three dimensional buried optical waveguides in diamond, inscribed by focused femtosecond high repetition rate laser pulses. Within the waveguides, high quality NV properties are observed, making them promising for integrated magnetometer or quantum information systems on a diamond chip.

Frequency-comb-assisted precision laser spectroscopy of CHF3 around 8.6 µm.

We report a high-precision spectroscopic study of room-temperature trifluoromethane around 8.6 µm, using a CW quantum cascade laser phase-locked to a mid-infrared optical frequency comb. This latter is generated by a nonlinear down-conversion process starting from a dual-branch Er:fiber laser and is stabilized against a GPS-disciplined rubidium clock. By tuning the comb repetition frequency, several transitions falling in the υ5 vibrational band are recorded with a frequency resolution of 20 kHz. Due to the very dense spectra, a special multiple-line fitting code, involving a Voigt profile, is developed for data analysis. The combination of the adopted experimental approach and survey procedure leads to fractional accuracy levels in the determination of line center frequencies, down to 2 × 10(-10). Line intensity factors, pressure broadening, and shifting parameters are also provided.