Development of alginate beads for precise environmental release applications: A design of experiment based approach and analysis.

Controlled release of active ingredients are important for drug delivery and more recently environmental applications including modulated dosing of chemical and biological controls. This study demonstrates the importance of investigating various material science factors that can influence the diffusion rates of alginate beads to improve and tune their performance for marine environmental applications. This investigation aimed to design a rational workflow to aid in leveraging alginate bead use as a carrier matrix for releasing a specific active agent into water. Experiments were conducted to focus on the narrow a large list of relevant material formulation parameters, which included chitosan molecular weight, chitosan concentration, calcium concentration, drop height, and bead size. Once the most relevant material preparation methods were screened, a more robust statistic Design of Experiments approach was performed and results determined the important (and unimportant) factors for increasing dye release kinetics in marine water. The process was further streamlined by narrowing the critical experimental factors to a three-level based on the prior analysis: chitosan MW, chitosan concentration, and bead size. Analysis of the collected data indicated that while chitosan MW had a negligible impact (Fstatistic = 0.22), bead size (Fstatistic = 60.33) significantly influenced the diffusion rates based on surface area. However, chitosan MW had minor effects where lower chitosan MW enabled higher product release rates. This case investigation was a novel application of the design of experiment approach towards environmental applications to understand differences in release rates to marine waters for the first time and the workflow provided also serve as the basis for researchers to optimize other environmental applications requiring optimization when it is unknown how a large number of formulation variables will impact performance in different environmental scenarios.

Draft Genome Sequences of Bacteria with Cyanocidal Potential Isolated from Eutrophic Waters Associated with Cyanobacterial Harmful Algal Blooms.

Here, we report the draft genome sequences of nine bacterial species isolated from eutrophic waters associated with cyanobacterial harmful algal blooms with cyanocidal potential.

Toward bioinspired polymer adhesives: activation assisted via HOBt for grafting of dopamine onto poly(acrylic acid).

The design of bioinspired polymers has long been an area of intense study, however, applications to the design of concrete admixtures for improved materials performance have been relatively unexplored. In this work, we functionalized poly(acrylic acid) (PAA), a simple analogue to polycarboxylate ether admixtures in concrete, with dopamine to form a catechol-bearing polymer (PAA-g-DA). Synthetic routes using hydroxybenzotriazole (HOBt) as an activating agent were examined for their ability in grafting dopamine to the PAA backbone. Previous literature using the traditional coupling reagent 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) to graft dopamine to PAA were found to be inconsistent and the sensitivity of EDC coupling reactions necessitated a search for an alternative. Additionally, HOBt allowed for greater control over per cent functionalization of the backbone, is a simple, robust reaction, and showed potential for scalability. This finding also represents a novel synthetic pathway for amide bond formation between dopamine and PAA. Finally, we performed preliminary adhesion studies of our polymer on rose granite specimens and demonstrated a 56% improvement in the mean adhesion strength over unfunctionalized PAA. These results demonstrate an early study on the potential of PAA-g-DA to be used for improving the bonds within concrete.

Analytical Methods Incorporating Molecularly Imprinted Polymers (MIPs) for the Quantification of Microcystins: A Mini-Review.

Harmful algal blooms (HABs) negatively impact numerous natural waterways worldwide and have significant socioeconomic and health-related ramifications for local populations. In order to better detect, characterize, and mitigate bloom events, novel field deployable analytical technologies capable of quantifying common HAB toxins (e.g., microcystins) are of paramount importance. Toward this end, molecularly imprinted polymer (MIP) transducing elements used in conjunction with sensitive analytical techniques may be a useful tool for microcystin detection and quantification. Indeed, several efforts have been undertaken in the last decade (2010-2020) to combine the selectivity provided by MIPs with various analytical methods, many of which are adaptable for in-field analysis. This review presents a summary of the current state of microcystins detection methods incorporating MIPs with a focus on potentiometry, photoelectrochemistry, liquid chromatography, quartz crystal microbalance, competitive ELISA, interferometry, and immunochromatography. Furthermore, a perspective detailing trends and observations from the current body of literature is provided to guide future MIP-based microcystin and other HAB toxin detection efforts with a specific focus on deployable analytical platforms.

A Generalized Potentiostat Adaptor for Multiplexed Electroanalysis.

Electrochemical measurements over an array of electrodes may be accomplished with one of three potentiostat architectures: a single-channel device which averages the signal from a number of interconnected electrodes, a multichannel device with dedicated circuits for each electrode, or a single-channel device with a multiplexer interface to isolate the signal from specific electrodes. Of these three architectures, the use of a multiplexer interface is best suited to facilitate measurements over individual electrodes without the need for large numbers of dedicated potentiostat channels. We present a versatile strategy for the development of flexible printed circuit (FPC) electrode arrays with accompanying multiplexing hardware to interface with single-channel potentiostats. The FPC array was fabricated with 78 individually addressable 0.3 mm diameter gold working electrodes and characterized using optical and scanning electron microscopy, energy dispersive spectroscopy, profilometry, impedance spectroscopy, and cyclic voltammetry to investigate the morphology, elemental composition, height profile, impedance characteristics, and electrochemical response, respectively. Interfacing the FPC array via a simple connector with three 32-channel ADG731 multiplexers permitted electrochemical measurements using single-channel commercial potentiostats. Voltammetric experiments were conducted to demonstrate the reliability, stability, and reproducibility of the FPC array and interfacing hardware. The combination of these devices represents an accessible hardware platform with robust, functionalizable electrodes, a simple connection interface with commercial potentiostats, and a low cost through the use of off-the-shelf components. Our reported strategy holds great promise to facilitate multiplexed electroanalysis in next-generation sensors to increase statistical sample size and multianalyte detection capabilities.

In Situ Preconcentration and Quantification of Cu2+ via Chelating Polymer-Wrapped Multiwalled Carbon Nanotubes.

Trace analysis of heavy metals in complex, environmentally relevant matrices remains a significant challenge for electrochemical sensors employing stripping voltammetry-based detection schemes. We present an alternative method capable of selectively preconcentrating Cu2+ ions at the electrode surface using chelating polymer-wrapped multiwalled carbon nanotubes (MWCNTs). An electrochemical sensor consisting of poly-4-vinyl pyridine (P4VP)-wrapped MWCNTs anchored to a poly(ethylene terephthalate) (PET)-modified gold electrode (r = 1.5 mm) was designed, produced, and evaluated. The P4VP is shown to form a strong association with Cu2+ ions, permitting preconcentration adjacent to the electrode surface for interrogation via cyclic voltammetry. The sensor exhibited a detection limit of 0.5 ppm with a linear range of 1.1-13.8 ppm (16.6-216 µM) and a relative standard deviation (RSD) of 4.9% at the Environmental Protection Agency (EPA) limit of 1.3 ppm. Evaluation in tap water, lake water, ocean water, and deionized water rendered similar results, highlighting the generalizability of the presented preconcentration strategy. The advantages of electrochemical analysis paired with polymeric chelation represent an effective platform for the design and deployment of heavy metal sensors for continuous monitoring of natural waters.