Bioethanol from poplar clone Imola: an environmentally viable alternative to fossil fuel?

BACKGROUND: Environmental issues, e.g. climate change, fossil resource depletion have triggered ambitious national/regional policies to develop biofuel and bioenergy roles within the overall energy portfolio to achieve decarbonising the global economy and increase energy security. With the 10 % binding target for the transport sector, the Renewable Energy Directive confirms the EU's commitment to renewable transport fuels especially advanced biofuels. Imola is an elite poplar clone crossed from Populus deltoides Bartr. and Populus nigra L. by Research Units for Intensive Wood Production, Agriculture Research Council in Italy. This study examines its suitability for plantation cultivation under short or very short rotation coppice regimes as a potential lignocellulosic feedstock for the production of ethanol as a transport biofuel. A life cycle assessment (LCA) approach was used to model the cradle-to-gate environmental profile of Imola-derived biofuel benchmarked against conventional fossil gasoline. Specific attention was given to analysing the agroecosystem fluxes of carbon and nitrogen occurring in the cultivation of the Imola biomass in the biofuel life cycle using a process-oriented biogeochemistry model (DeNitrification-DeComposition) specifically modified for application to 2G perennial bioenergy crops and carbon and nitrogen cycling. RESULTS: Our results demonstrate that carbon and nitrogen cycling in perennial crop-soil ecosystems such as this example can be expected to have significant effects on the overall environmental profiles of 2G biofuels. In particular, soil carbon accumulation in perennial biomass plantations is likely to be a significant component in the overall greenhouse gas balance of future biofuel and other biorefinery products and warrants ongoing research and data collection for LCA models. We conclude that bioethanol produced from Imola represents a promising alternative transport fuel offering some savings ranging from 35 to 100 % over petrol in global warming potential, ozone depletion and photochemical oxidation impact categories. CONCLUSIONS: Via comparative analyses for Imola-derived bioethanol across potential supply chains, we highlight priority issues for potential improvement in 2G biofuel profiling. Advanced clones of poplar such as Imola for 2G biofuel production in Italy as modelled here show potential to deliver an environmentally sustainable lignocellulosic biorefinery industry and accelerate advanced biofuel penetration in the transport sector.

The rotation of white lupin (Lupinus albus L.) with metal-accumulating plant crops: a strategy to increase the benefits of soil phytoremediation.

Most of the plants employed to remove metals from contaminated soils are annuals and have a seed-to-seed life cycle of a few months, usually over spring and summer. Consequently, for most of the year, fields are not actively cleaned but are completely bare and subject to erosion by water and wind. The objective of this study was to evaluate the benefits of using Lupinus albus as a winter crop in a rotation sequence with a summer crop ideally selected for phytoextraction, such as industrial hemp. Lupin plants were grown in two alkaline soil plots (heavy metal-contaminated and uncontaminated) of approximately 400 m(2) each after the cultivation and harvest of industrial hemp. A smaller-scale parallel pot experiment was also performed to better understand the lupin behavior in increasing concentrations of Cd, Cu, Ni and Zn. White lupin grew well in alkaline conditions, covering the soil during the winter season. In few months plants were approximately 40-50 cm high in both control and contaminated plots. In fields where the bioavailable fraction of metals was low (less than 12%), plants showed a high tolerance to these contaminants. However, their growth was affected in some pot treatments in which the concentrations of assimilable Cu, Zn and Ni were higher, ranging from approximately 40-70% of the total concentrations. The lupin's ability to absorb heavy metals and translocate them to shoots was negligible with respect to the magnitude of contamination, suggesting that this plant is not suitable for extending the period of phytoextraction. However, it is entirely exploitable as green manure, avoiding the application of chemical amendments during phytoremediation. In addition, in polluted fields, white lupin cultivation increased the soil concentration of live bacteria and the bioavailable percentage of metals. On average live bacteria counts per gram of soil were 65×10(6)±18×10(6) and 99×10(6)±22*10(6) before and after cultivation, respectively. The percentages of bioavailable Cu, Pb, Ni, Zn and Cr, which were 5.7±0.7, 5.3±1.7, 1.2±0.1, 12±1.5 and 0.1±0.02%, respectively, before lupin growth, increased to 9.6±1.6, 7±2, 2±0.3, 14±1.5 and 0.1±0.02% after lupin harvest. On the whole, our results indicate that the winter cultivation of white lupin in sequence with a metal-accumulator summer crop can improve the recovery of soil quality during the phytoextraction period. It improves the safety of the area, limiting additional ecological and human health problems, and enhances soil health by avoiding the use of chemical amendments and by increasing the levels of viable microorganisms.

Preliminary use of ground-penetrating radar and electrical resistivity tomography to study tree roots in pine forests and poplar plantations.

In this study, we assess the possibility of using ground penetrating radar (GPR) and electrical resistivity tomography (ERT) as indirect non-destructive techniques for root detection. Two experimental sites were investigated: a poplar plantation [mean height of plants 25.7 m, diameter at breast height (dbh) 33 cm] and a pinewood forest mainly composed of Pinus pinea L. and Pinus pinaster Ait. (mean height 17 m, dbh 29 cm). GPR measures were taken using antennas of 900 and 1500 MHz applied in square and circular grids. ERT was previously tested along 2-D lines, compared with GPR sections and direct observation of the roots, and then using a complete 3-D acquisition technique. Three-dimensional reconstructions using grids of electrodes centred and evenly spaced around the tree were used in all cases (poplar and pine), and repeated in different periods in the pine forest (April, June and September) to investigate the influence of water saturation on the results obtainable. The investigated roots systems were entirely excavated using AIR-SPADE Series 2000. In order to acquire morphological information on the root system, to be compared with the GPR and ERT, poplar and pine roots were scanned using a portable on ground scanning LIDAR. In test sections analysed around the poplar trees, GPR with a high frequency antenna proved to be able to detect roots with very small diameters and different angles, with the geometry of survey lines ruling the intensity of individual reflectors. The comparison between 3-D images of the extracted roots obtained with a laser scan data point cloud and the GPR profile proved the potential of high density 3-D GPR in mapping the entire system in unsaturated soil, with a preference for sandy and silty terrain, with problems arising when clay is predominant. Clutter produced by gravel and pebbles, mixed with the presence of roots, can also be sources of noise for the GPR signals. The work performed on the pine trees shows that the shape, distribution and volume of roots system, can be coupled to the 3-D electrical resistivity variation of the soil model map. Geophysical surveys can be a useful approach to root investigation in describing both the shape and behaviour of the roots in the subsoil.